Deep Cool Users Pasok! Show me your temps!

• vanguardwars on November 19, 2009 10:35 PM

  Ahem, speaking of OC, ako +10% OC lang kaya ng system ko (2.6GHz to 2.86GHz only), dahil kasi sa limitation ng mobo at memory ko, kaya di ko ramdam yung OC ko, hehe.
  
  Dapat kaya po talaga ng system mo as a whole, hindi lang sa cooling. HTH. :)

• just3n21 on November 19, 2009 11:05 PM

  how would i know the capacity of mywhole system? trial and error po ba ang gagawin?

• vanguardwars on November 19, 2009 11:11 PM

  @just3n21,
  Yes po sir, One component at a time po, hehe. Sa net lang din po ako nagumpisa matuto sa OC but I'm not an expert yet. Ang alam ko po ritong magaling ay si fafa Jillefren at si Master NerdHerd. :)

• NerdHerd on November 19, 2009 11:20 PM

  
  just3n21 Send Message View User Items on November 19, 2009 11:05 PM - User is Online
  how would i know the capacity of mywhole system? trial and error po ba ang gagawin?
  

  
  
  
  Simply by looking at your motherboard BIOS.
  
  every system that is capable of overclocking is because of the motherboards features and capabilities.
  
  given na sa mga processors and rams ang mag oc, pero hindi mo sila ma o- oc kapag hindi ka gagamit ng motherboard na merong options na makakatulong sa pag overclock.

• wyeth on November 20, 2009 12:14 AM

  [Simply by looking at your motherboard BIOS.
  
  every system that is capable of overclocking is because of the motherboards features and capabilities.
  
  given na sa mga processors and rams ang mag oc, pero hindi mo sila ma o- oc kapag hindi ka gagamit ng motherboard na merong options na makakatulong sa pag overclock. ]
  
  
  pero sir pwede ba mag oc ng processor kahit hindi i-oc ang ram?

• LiljHoN_05 on November 20, 2009 12:24 AM

  Good Morning DCU's!
  
  post ko lang po,.
  
  
  
  
  
  
  
  puro po Deep Cool Silent Fan yan,. ^_^

• NerdHerd on November 20, 2009 12:47 AM

  once i oc mo ang processor, it means turning up either the multiplier or the fsb/bclock(i7)
  
  multiplier oc sample
  
  i7 920 @ 133 x 20 = 2660mhz - stock
  i7 920 @ 133 x 21 = 2793mhz - multiplier oc
  
  fsb/bclock oc
  
  i7 920 @ 133 x 20 = 2660mhz - stock
  i7 920 @ 200 x 21 = 4200mhz - fsb/bclock oc
  
  multiplier oc is very limited, unless the processor your using has more options or unlocked multipliers.
  
  the easiest way to oc is to run your rams at a lower frequency and use the processors highest multiplier.
  
  sample
  
  Q6600
  
  266 x 9 = 2.4Ghz - stock clocks <-- as you can see the rams are running at a very low frequency of 266mhz or 533mhz effective if read in DDR mode, while most of you guys use DDR2 1066 rams by now.
  
  so its clear underclocked ang rams so it means even mag overclock ka it doesnt mean na ino overclock mo narin rams mo.
  
  400 x 9 = 3600Mhz <- kung naka DDR2 1066 ka na rams, ditosa settings na ito underclocked parin ang rams mo pero the good thing here, pwede mo sya i run in very good and fast timings.
  
  
  
  ayan crash course oc.

• NerdHerd on November 20, 2009 01:01 AM

  the easiest way to oc is to run your rams at a lower frequency and use the processors highest multiplier.

  
  
  now you may ask, "Ano naman yung Mahirap na overclock?"
  
  well' nung time na gawin ko ang overclock na ito, eh hindi pa available ang DDR2 1066
  
  
  93% Overclock of an E6300 Conroe Dual Core - On Air using a Thermaltake Big Typhoon that now looks like the Killer whale in Deep Cool
  
  
  
  
  
  Validation Link: <click here for link>
  
  as you can see in the oc, my rams are running @ 515mhz (1030Mhz effective) while rated lang sya as PC6400 or DDR2 800Mhz :)
  
  the same thing can be done with the Q6600.
  
  you can run it like 500 x 7 = 3500Mhz
  
  overclocks done in this manner gives more performance compared to other oc's as both the processor and rams are running at a higher clock rating.
  
  HTH
  
  -- edited by NerdHerd on Nov 20 2009, 01:13 AM

• jillefren on November 20, 2009 05:56 AM

  pero what do you mean kaya din ng system?

  
  
  Sometimes pag na over ang OC mo, mag rerestart ng kusa ang system BIOS,Pero babalik naman sa default setting ang System bios mo.
  
  it means hindi nag babalance or hindi kinaya ng system BIOS ng mobo ang nai set mo percentage ng OC Kaya ng Restart.
  
  Gandang Umaga DCU.
  
  -- edited by jillefren on Nov 20 2009, 06:06 AM

• stsagun on November 20, 2009 06:23 AM

  underclock to overclock.
  
  then test for stability dahil useless ang OC kung hindi stable ang system.

• freakyrob14 on November 20, 2009 06:44 AM

  hehe deep cool user na din ako kabibili k lang kay sir nerdhed ng ice edge at deep cool fan post ko picture later....

• botanika0126 on November 20, 2009 07:35 AM

  Magandang Umaga Deep Coolers..^_^
  
  @freakyrob14
  
  congrats! welcome to the club ^_^
  
  @all
  sino sa inyo ang may mobo na may option ng cooln'quiet? kapag naka OC ba ung procie naaapply po ba un?
  
  I OC'ed my procie from 2.8GHz to 3.7Ghz and ang temp ay 32c kapag idle at kapag full load ay 36c max..mababa na po ba un?
  
  MOBO- Gigabyte 78GM-US2H
  RAM- 2x2GB Team Xtreme DDR2 800 CL5
  PROCIE- Athlon II X2 240 OC'ed @3.7GHz
  
  
  
  
  para hindi OT ^_^
  
  
  
  -- edited by botanika0126 on Nov 20 2009, 07:46 AM

• dongskie_28 on November 20, 2009 08:09 AM

  magandang umaga DCU
  
  @ botanika0126
  
  kamusta OC mo??pumalo ba ng 4.ghz
  
  @ nerdherd
  
  galing naman po ng OC nio sir... umaabot ng 500Mhz FSB.. alam ko kasi upto 400mhz lang limit ng mobo di po ba?
  
  @ me
  
  hehehe. lang magawa..naglapp ng V4000.. mukang pwedeng pwede na
  
  idle and loaded @ furmark stability test for 30mins...
  
  
  
  
  Mukang may alikabok na ng konti fan ng v4000 ko..
  
  
  
  
  SATISFIED user nako!!

• botanika0126 on November 20, 2009 08:16 AM

  kamusta OC mo??pumalo ba ng 4.ghz
  

  
  
  hindi co pa po sinusubukan sir..ittry co pa lang po mamaya..
  
  
  
  

  alam ko kasi upto 400mhz lang limit ng mobo di po ba?

  
  
  ung mobo co po 200Mhz-500Mhz ang range.
  
  @dongskie
  
  OC'ed na po ba ung vid card mo? astig ang lamig nyan..^_^

• dongskie_28 on November 20, 2009 08:21 AM

  nope..
  

  OC'ed na po ba ung vid card mo? astig ang lamig nyan..^_^

  
  
  parang diko na need ioc VC ko eh..
  
  i just bought my V4000 to decrease my temps.. @ stock kasi nasa 57-60 idle and max ko is 75 in gaming.. purpose ko lang talaga is cooldown.. di for OCng
  
  @ botanika
  
  try mo OC using method ni sir nerdherd.. lower mu yung multiplier saka mo imax sa fsb....

• botanika0126 on November 20, 2009 08:36 AM

  try mo OC using method ni sir nerdherd.. lower mu yung multiplier saka mo imax sa fsb....

  
  
  ehehe..nililista co na nga ung lahat mga possible combinations eh..^_^
  para may magawa dito sa office..hihiihi
  
  -- edited by botanika0126 on Nov 20 2009, 08:39 AM

• jillefren on November 20, 2009 09:22 AM

  @freakyrob14
  
  Welcome to the Thread and congrats..

• apocalypse_214 on November 20, 2009 10:24 AM

  ok na ba yung ganitong temps? Ice Blade Pro
  
  E8200 @stock
  
  cpu temp : 30c idle / 39c load
  core 0 : 43 idle / 51 load
  core 1 : 39 idle / 50 load
  
  using realtemp and cpuid monitor.

• mr_frodo on November 20, 2009 12:54 PM

  mga masters, ask ko lang po, pano po ba airflow ng deepcool xfan5 palabas po ba o papasok? salamtski sa sasagot ng aking munting katanungan

• NerdHerd on November 20, 2009 12:56 PM

  exhaust sya sir.. palabas po.

• mr_frodo on November 20, 2009 01:01 PM

  ay sayang, sir nerdherd di po ba pwede i mod yung xfan5 para maging intake sya? salamat

• hakujosh on November 20, 2009 01:06 PM

  ask ko lang kung may potential OC ba ang pentium d2.8ghz + emaxx ig31-avl? ung mobo ko ba capable of OC'ing?thx

• apocalypse_214 on November 20, 2009 01:11 PM

  @NerdHerd
  
  ok ba yung kasamang thermal paste ng ice blade pro?

• renzdg on November 20, 2009 01:15 PM - User is Online

  ^its better to use aftermarket thermal compounds like tuniq or gelid extreme... lalabas full potential ng Ice Blade mo..

• paultan on November 20, 2009 01:23 PM

  @nerdherd
  
  sir ask lang if ok na ba to???
  
  q6600 at 400x8 with 1.39v temps 43 at idle
  asus maximus II po ang aking mobo
  G Skill Trident 8 GB ddr2 1066 running at 1066 5-5-5-15 with 1.8v
  
  gusto ko sana gawing 3.6Ghz yung q6600 ko kaso ang temps are 50+ at idle
  
  at gusto ko rin OC yung mems ko ng kahit 1100 or 1200mhz kaya po ba sa setup ko? pano kaya? thanks

• dongskie_28 on November 20, 2009 04:13 PM

  mga masters, ask ko lang po, pano po ba airflow ng deepcool xfan5 palabas po ba o papasok? salamtski sa sasagot ng aking munting katanungan

  
  
  palabas po papuntang pci slot.. magandang positioning nian in bet VC and procie.. hihigupin ng hot air palabas kasi taas at baba hihigupin nia...
  
  pero mas trip ko thermal take cyclo fan kesa xfan5.. ilove led lights eh.. ^_^

• kempoybokbok on November 20, 2009 07:07 PM - User is Online

  Mga boss pasali po ako..
  
  eto po temp ko.. bago pa lang ako sa ganito eh.. gusto ko po sana mag oc..
  
  
  
  
  
  
  
  
  plan ko din magdagdag ng v4000 kasi mainit palagi ung 7300gt ko eh baka sira na ung fan.. kakasya po ba mga sir sa inno3d nvidia 7300gt un? thanks..

• NerdHerd on November 20, 2009 11:17 PM

  paultan Send Message View User Items on November 20, 2009 01:23 PM - User is Online
  @nerdherd
  
  sir ask lang if ok na ba to???
  
  q6600 at 400x8 with 1.39v temps 43 at idle
  asus maximus II po ang aking mobo
  G Skill Trident 8 GB ddr2 1066 running at 1066 5-5-5-15 with 1.8v

  
  
  sir, maganda po ang motherboard nyo and its one of those that can make high and stable overclocks.
  
  I'm sure, with the correct voltages kaya nya ang 450*8 = 3600Mhz @1.45 <-- just make sure you got good cooling (i.e. fans with 90cfm on your hsf)
  
  with regards to your rams they are rated to run at 1066mhz @ 2.1 or 2.3vdimm, therefore i would suggest you to set them at 450mhz (900Mhz effective) on 2.1 or 2.3vdimm @4-4-4-12 timings. :)
  
  hth

• rodel5552002 on November 20, 2009 11:38 PM

  @dongskie
  
  nadale mo din a.. hehe

• dongskie_28 on November 21, 2009 08:30 AM

  ^ hohonga kelangan ko nalang ng intake fan sa tapat ng VC sa sayd panel para mas lumamig pa.. ahihihi
  
  @ DCU
  
  morning greetings po..kape muna kagigising lang eh..hirap talaga pag ako boss sa work ko anytime ang gising lalu na pag week ends

1234 active users within the last 5 minutes, 800 members, 434 guests.
Our newest member is corey_taylor16
Click here to see online members.