Item Details
Items For Sale : IT Books/References
Memory / RAM So Dimm - KVR26S19D8/16 16GB 2Rx8 2G x 64-Bit PC4-2666 CL19 260-Pin
PHP 2200.00
BRAND NEW with PERSONAL WARRANTY
✅On Stock
✅Brand new Sealed
Brand Name: Kinston
KVR26S19D8/16
16GB 2Rx8 2G x 64-Bit PC4-2666
CL19 260-Pin SODIMM
DESCRIPTION:
This document describes ValueRAM's KVR26S19D8/16 is a 2G x
64-bit (16GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM),
2Rx8, non-ECC, memory module, based on sixteen 1G x 8-bit
FBGA components. The SPD is programmed to JEDEC standard
latency DDR4-2666 timing of 19-19-19 at 1.2V. This 260-pin DIMM
uses gold contact fingers. The electrical and mechanical
specifications are as follows:
FEATURES:
• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
• Low-power auto self refresh (LPASR)
• Data bus inversion (DBI) for data bus
• On-die VREFDQ generation and calibration
• Dual-rank
• On-board I2 serial presence-detect (SPD) EEPROM
• 16 internal banks; 4 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Fly-by topology
• Terminated control command and address bus
• PCB: Height 1.18” (30.00mm)
• RoHS Compliant and Halogen-Free
<click here for link>
Meet Up:
Monumento, Caloocan
Grand Central Caloocan
Victory Mall Caloocan
Robinson Malabon
✅Brand new Sealed
Brand Name: Kinston
KVR26S19D8/16
16GB 2Rx8 2G x 64-Bit PC4-2666
CL19 260-Pin SODIMM
DESCRIPTION:
This document describes ValueRAM's KVR26S19D8/16 is a 2G x
64-bit (16GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM),
2Rx8, non-ECC, memory module, based on sixteen 1G x 8-bit
FBGA components. The SPD is programmed to JEDEC standard
latency DDR4-2666 timing of 19-19-19 at 1.2V. This 260-pin DIMM
uses gold contact fingers. The electrical and mechanical
specifications are as follows:
FEATURES:
• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
• Low-power auto self refresh (LPASR)
• Data bus inversion (DBI) for data bus
• On-die VREFDQ generation and calibration
• Dual-rank
• On-board I2 serial presence-detect (SPD) EEPROM
• 16 internal banks; 4 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Fly-by topology
• Terminated control command and address bus
• PCB: Height 1.18” (30.00mm)
• RoHS Compliant and Halogen-Free
<click here for link>
Meet Up:
Monumento, Caloocan
Grand Central Caloocan
Victory Mall Caloocan
Robinson Malabon