Tama bro, the best thing is kung magkano ko na lang sya nakuha, lalo na't brand new unboxed.. Mas mura pa sa entry-level Tecware,
^3 years old na rin pala yung PM01. Pero iba talaga kapag may ventilation yung case vs solid panel, tapos 4x140mm pa yung fans na kasama nyan solid talaga yung palit ng casing hehe.
Pareho lang PSU cooling ng B3 & C1. Yun lang issue talaga baka umingay yung sfx psu fan or machoke sa B3 pero may ATX PSU support naman yung sa C1 kaya naka 120mm fan malamang.
Additional consideration sa C1 kailangan mo ng right angle hmdi or dp connector kasi nasa baba yung I/O.
Meron ata seller dito for SAMA IM01 (nagsesearch ako ng nr200p then lumabas sa search result). Bumili na ko sa taobao before using superbuy as middle man ok naman matagal lang shipping but I suggest searching muna sa shop** or laza**.
Currently eyeing B3. Balak ko din icustom loop but mejo wary since I need atleast 2 rads for my setup. Yung isa kahit 120 or 92mm lang. Sa C1 naman parang kaya ng 240 but walang taguan for cable management since I'll be using sleeved cables. Same lang ba sila ng nagdevelop?
ZZAW cases pareho yan. Search mo nalang sa bilibili (CN youtube) yung model number under digital category may build guide videos pa.
Sa likod ng motherboard nila pinapadaan yung custom sleeves cables.
May sample ng 240mm aio sa C1. Mamaya ipost ko link mahirap kasi magbrowse sa phone ng bilibili.
-- edited by Ignus on Dec 09 2020, 10:32 AM
Thanks dude, decided na ko actually sa B3. Mejo turnoff lang sakin kasi pag route ng cable sa ilalim with C1.
Edit 1: saw a video sa bilibili with a B3 build. Dun sa build gamit nya is 2060 armor which is a tall card (around 130mm height), meaning that the card with the block kasama yung inlet and outlet should be or less than 130mm in height. Sa haba naman walang problem. Here's to hoping walang maging issue sa custom loop build.
Edit 2: Mukhang tight fit dun sa sleeved cables. Either way mejo masikip ang airflow sa loob so ang naiisip ko is maglagay ng mga ilang mm high na spacer para may makapasok or mahigop na hangin.
Suggestions for a good matx case! Lilipat ako from napakbigat na atx tower.
Note:
matx mobo
5700XT - 280mm length
yung pwede NH-D15 or Dark Pro 4 (or top na 240mm AIO)
After initial research, two choices: Fractal Meshify C Mini and NZXT H400i
Meshify C Mini: better airflow, kasya large air cooler, aio on top, cheaper
H400i: good airflow, hindi kasya ang d15 and dark pro 4, aio front only, more expensive, better cable management
Pa post ng setup sir. Hindi pala pwede side mounted un AIO cooler ng IM01 SAMA kapag MATX board un gamit. Hindi naman nakalagay sa specs nun case kung ano un limit ng thickness for top AIO.
@songerph
Not mATX pero mas maliit or similar footprint ng Phanteks P300A & Silverstone Fara R1 at half the price. (both nasa 36L, smaller than some mATX cases)
Pwede rin Cooler Master MB311L, Deepcool Macube 110 or Deepcool Matrexx 40(same chassis different front panel).
Tapos yung mga sikat na budget cases na pagpipilian mo: Tecware Alpha M, Tecware Forge M, DarkFlash DLM21 Mesh, Rakk Haliya M
@asintado08_new <click here for link> <click here for link>
Mukhang dikit masyado yung top panel & nakaharang yung PSU, 158mm height cooler lang talaga kapag mATX gagamitin na motherboard.
Still waiting for the B3 MATX mukhang no choice na ko. Sana lang walang problem pagdating. I might attempt to do a custom loop here if kakayanin. Kulang talaga sa info kahit nakailang research na ko. Basically had to buy parts in advance and I think everything will be a tight fit (andaming vouchers and discount ngayon 12-12, practically saved around 8k with vouchers, bundles etc). If ever, I might use a thicker 240 rad, around 45mm since it'll be cooling both GPU and CPU.
Pag dumating siguro lahat ng parts, I'd probably document the journey and do a multipart video on it. The parts are all from L*z*da and Sh*pe* din so this could make a good comparison vs buying prebuilt from other physical stores. Plus the pro's and con's especially with the warranty. But it'll probably take 2-3 weeks at most, so hopefully before the year ends sana lang dumating lahat para may mabuild na.
^May english build log/guide na sa B3 sa Reddit: <click here for link>
ITX board nga lang gamit nya kaya slim 120mm fan lang napagkasya niya sa taas, kulang ng clearance.
Siguro kung up to 6 cores/12 threads lang na CPU good na yung NH-U9S, Thermalright AK-120 mini or ID-Cooling SE-914-XT na CPU cooler na may intake from the rear.
