Nakikita ko lang downside nito is malaki masyado yung TG both sides, kaya kita yung messy cables mo sa PSU chamber. Naiisip ko takpan ng some sort of sticker para di masyado makita.
Isa pang nakita kong issue kaka nuod ko ng reviews ay pag nag lagay ka ng top mount fans, 145mm nalang ang clearance ng Tower coolers. Naiisip kong remedyo dito is i-ikot yung top mounting bracket 360degrees, not sure kung uubra.
AIO also has a little issue pag mahaba yung tubes.
Saka yung pag pasok ng PSU to Mobo pin (4/6/8 pins) dahil naiipit sa TG.
Sa PSU chamber, tinago ko lahat sa taas ng PSU lahat ng excess cables, yung iba sa HDD chamber. Hindi kasi modular ung PSU ko.
About top bracket, parang negative yan. Naisip ko din siya before dahil gusto ko sana may top fans kaso negative. Kaya 2 case fans n lang ako and 2 fans for CPU (gammaxx)
PSU to Mobo - may slot sya para hindi maipit sa TG.
@razorjay
Cryorig M9 Plus lang siguro yung locally available na tower cooler na kasya.
Kung gagamitin mo yung top fan mounts parang mas okay yung downdraft coolers. Wala nga lang masyadong local choices kundi mga ID Cooling low profile coolers. Okay sana NH-C14S, NH-L12S or Scythe Big Shuriken 3 pero mahal na compared sa budget tower coolers.
take a look at the AIGO Gale cooler, only 132mm tall with 6 heatpipes, just replace the fans with slim 92mm fans from ID-COOLING ... just search L*z*d* or sh*p** ... only about p1300-14XX
Yown! Gusto ko nga din AIO kaso walang budget kaya gammaxx na lang, 3100 lang din naman Proc ko. Kahit OC’ed di nataas ng 75c.
Madilim ung ilalim ng quad, nilagyan mo n lang ilaw? Haha.
May nakkita din ako kay lazada na custom rgb panel galing china, pang takip sana kaso parang wag n lang.
@Ignus
Yeah! Gusto ko nga rin iyung layout at iyung Type-C front header (Tho wala pa naman ako paggagamitan pero was thinking na "sayang" iyung front header (type-C) ng mobo kung hindi rin magagamit).
320mm kasi kailangan ko for my GPU and sadly 310mm lang ang nasa paper ng S200. T_T
Warning lang if you're getting a Darkflash DLM21, I got this picture from reddit and can confirm that it's the only way to mount 2 140mm fans in front. The 140mm mounting holes in the middle are too short to be able to add another fan directly below it, kahit na nakasagad yung top fan sa taas.
You may need to make a custom bracket to fit a second 140mm fan below the top one. I'd use an aluminum (steel sheet metal) angle bar like this:
One on the left, one on the right. Mark the positions for the fan mounting holes, then drill.
The L shape adds rigidity to the bracket, so it doesn't bend or warp easily.
Well, I finished my transfer from a Phanteks P600S to the DLM21 Mesh. Ended up using 2 Arctic P12s in front na lang.
I also have a Fuma 2 still boxed but ended up with the Mugen 5 Black Edition for a black and gray build. Dagdagan ko na lang siguro ng LED strip para sa konting lighting.
Specs:
Ryzen 7 3700X
Palit RTX 3070 Gaming Pro
MSI B550M Mortar
GSkill Ripjaws V 2x 8GB 3200Mhz
Adata SX8200 256GB NVME
WD Blue 500GB SATA M.2
WD Red 2TB HDD
Seasonic Fous GM850
Arctic P12 x4
Well, I finished my transfer from a Phanteks P600S to the DLM21 Mesh. Ended up using 2 Arctic P12s in front na lang.
I also have a Fuma 2 still boxed but ended up with the Mugen 5 Black Edition for a black and gray build. Dagdagan ko na lang siguro ng LED strip para sa konting lighting.
Specs:
Ryzen 7 3700X
Palit RTX 3070 Gaming Pro
MSI B550M Mortar
GSkill Ripjaws V 2x 8GB 3200Mhz
Adata SX8200 256GB NVME
WD Blue 500GB SATA M.2
WD Red 2TB HDD
Seasonic Fous GM850
Arctic P12 x4