Forum Topic

Micro ATX users here!

  • @Pektong

    Kasya yan, based on Google, 300mm lang yung TUF card, about the same nitong 3070 Jetstream, and comfortable ko pa nalalagay sa DLM21 mesh, may allowance pa.
  • ZZAW B3 user here maganda ung case at ang airflow .. :)
  • @XtraRice
    @oiastig

    thanks mga bro.. pansin ko lang medyo mas mataas temps ko sa gpu dito kesa sa fara h1m. hindi tapat yung fan ko dito sa gpu medyo nakaangat siya. siguro dahil na rin sa pinagpalit ko yung 140mm fans ko as exhaust at 3 120mm fans na ang nilagay ko dito as intake. isang factor na rin siguro yung shroud ng psu hindi butas butas at maliit lang ang clearance sa gpu 'di tulad sa h1m kaya mas mababa temps ko.

    -- edited by pektong on Jul 19 2021, 11:27 PM
  • ^Mas maganda talaga GPU cooling nung 2x140mm na nakaoffset sa GPU side tapos may PSU shroud vents vs 3x120mm na solid PSU shroud, halos walang silbi yung 3rd bottom fan.

    Lalong mas malaki difference kung yung design pa ng mobo mo na nakaoffset sa second PCI slot yung GPU(Gigabyte B550 mATX mobos,etc.), wala ng matinong airflow para sa GPU fans mo.
  • ^binalik ko na bro sa fara ulit..laki ng gpu temp difference sa dlm21 from 72 to 61degrees na lang ang gpu temps ko. yun lang need mo bumili ng rubber mounts kasi sa labas ng case naka mount dapat yung fan intakes dahil mahaba ang gpu ko. correction pala 3060 lang yung sakin hindi 3070 hehe..

    -- edited by pektong on Jul 21 2021, 07:00 PM
  • ^mainit pala talaga sa gpu dlm21. wala kase butas yung psu shroud. ang laki ng difference sa temps pala pag may butas.
  • previous owner ako ng DLM21 binenta ko dahil walang butas yung psu shroud. nagpalit ako nung tecware na same ng dlm21 na may butas sa psu shroud ayun solb ang problem mas mura pa yung tecware.
  • Hi. Sa mga naka silverstone fara h1m po dito, Pwede po ba lagyan ng 120mm fans yung sa may psu shoud nya?
  • Good day. Ask ko lang po sa mga user dito ng zzaw c2 if hindi ba talaga kasya ang 244mm * 244mm mATX board if ATX psu ang gagamitin? Naka saad po kasi na 244mm * 225mm ang suggested size ng board if gagamit ng atx psu. Plan ko po kasi mag palit from tecware quad to zzaw c2. Salamat!
  • Good day. Ask ko lang po sa mga user dito ng zzaw c2 if hindi ba talaga kasya ang 244mm * 244mm mATX board if ATX psu ang gagamitin? Naka saad po kasi na 244mm * 225mm ang suggested size ng board if gagamit ng atx psu. Plan ko po kasi mag palit from tecware quad to zzaw c2. Salamat!

    Zzaw C2 user here pero SFX po yung PSU ko. And upon checking, mukhang hindi kakasya ang 9.6x9.6in na mobo combined with ATX PSU Sir.
  • @smooth_76, salamat po sa reply. Mag aadjust na naman ng budget hehe.. I'll replacing my old unit na i5-2500k and gagamitin ko pa din ang old atx psu ko na seasonic M12II evo and other components.
  • @smooth_76, salamat po sa reply. Mag aadjust na naman ng budget hehe.. I'll replacing my old unit na i5-2500k and gagamitin ko pa din ang old atx psu ko na seasonic M12II evo and other components.

    You're welcome po Sir.
    One more thing, wala po syang USB port. For me, medyo hassle po yung kakapain pa sa likod pag nag plug ng USB hahaha.
  • @smooth_76, yun nga din sir ang iniisip ko. Tapos itx mobo pa, konti lang ang usb port. Hahaha,
    Pabulong naman sir if san nyo nakuha. Baka mura kesa sa plano kong kuhanan. Lol

    Also, tanong ko lang din if my slot po ba sya for 2.5 ssd? Sayang yung ssd ko from other build if di ko madadala jan sa c2 case.
  • Ano kaya magandang mATX Case na may Front USB Type-C
  • ^

    NZXT H400i lang ang alam kong meron.

    Need ko rin para hindi masayang yung USB-C header nitong B550m Mortar ko
  • Post deleted #12389226
  • Good day po, ano marecommend nyo na mATX na case na maraming lagayan ng HDD 3.5? TIA
  • @pongpagong915 Fractal Design Node 804

    -- edited by maynero on Sep 05 2021, 11:59 AM
  • Good day po, ano marecommend nyo na mATX na case na maraming lagayan ng HDD 3.5? TIA
    PM sent paps
  • Guys may masusuggest ba kayo na Matx case na mas maliit pa sa Tecware Fusion na hindi naman ganun macocompromise yung thermals.
  • angas naman ng TEcware Fusion
  • @turonngayon2

    Guys may masusuggest ba kayo na Matx case na mas maliit pa sa Tecware Fusion na hindi naman ganun macocompromise yung thermals.


    Wala na, basically ITX sized na case na yan. Wala akong alam na SFF case na pwede mATX board.
  • @turonngayon2

    Try mo ZZAW B3, compatible ang mATX boards pero up to SFX-L lang ang PSU. Medyo ambitious yung "less thermally compromised" sa Fusion pero mas maliit pa. The Fusion/Sama Quzao appears to be the best overall small mATX case right now. The ability to put 2 full sized 120mm fans as bottom intake is nice.
  • @turonngayon2
    Depende sa CPU & GPU na gagamitin mo.
    ZZAW C3 ~ 360mm AIO, 3 GPU intake fans
    ZZAW C6 ~ 240mm AIO, 2 GPU intake fans
    Mechanic Master C28 ~ 162mm tower cooler, 2 GPU intake fans, kung may budget ka ito pinakamagandang all around SFF mATX case IMO.
    Jonsbo V9 ~ same as ZZAW B3

    Silverstone PS15 - bigger volume, smaller footprint, classic tower layout, 240mm AIO or ID Cooling SE-224-XT.

    -- edited by Ignus on Sep 21 2021, 07:11 AM
  • Thank you mga sir. It looks like I'm going to settle between Tecware Fusion and Sama Quzao kung ano mahanap kong stock since Identical naman sila. I will be coming from Deepcool Macube 101 and magrenovate ng room kaya need ko ng compact CPU. Hopefully wala naman maging malaking difference sa thermals.
  • Post deleted #12393720
  • Okay din 'tong Montech Air 100. Only P2,100.





  • mukhang ok yang montech. parang mapapalitan ko na etong si fara ko ehehe
  • Good morning po sa lahat, quick question po sana.

    I'm considering changing my case to Tecware Fusion, kaya lang I'm not really sure regarding the current graphics card and PSU if kakasya:

    PSU: SeaSonic SS-660XP (150.0 x 160.0 x 86.0 mm)
    GPU: ROG Strix GTX1080TI (298 x 134 x 52.5 mm)

    My concern is the connectors po ng PSU ko baka sasagi sa backplate ng graphics card. Sa mga meron neto, pwede po favor sana to post measurements (ruler or tape measure with the dimension above so I can visualize it (298 mm GPU vs 160 mm PSU).

    Maraming salamat, po.

    EDIT:

    Parang kasya.. I found this post in Reddit:

    https://www.reddit.com/r/sffpc/comments/n66ayx/migrated_my_work_rig_into_the_tecware_fusion/

    He is using a Galax 3070 ti (317 mm) with an FSP Hydro K 500W (150 mm)

    Would greatly appreciate it if those who have this case can confirm or share measurements. :)

    -- edited by pjconoso on Sep 26 2021, 10:20 PM