Forum Topic

Micro ATX users here!

  • @ignus

    Yep ok si fara.. downside is pag mahaba ang gpu mo mahirap ikabit at yung fan need mo imount sa labas ng case. Yung sa dlm naman yung shroud niya walang butas kaya pag 2.7 ang slot na kakainin ng gpu mo medyo mainit temps neto. Bumalik ako sa fara ko galing ng dlm dahil dun sa issue ng mas mataas na temps nung gpu ko

    <click here for link>

    -- edited by pektong on Nov 21 2021, 07:22 PM
  • ^lalo na pag yung PCI-E x16 slot mo is 2nd slot instead of 1st slot, sakal na hehe, pero mukhang ok lang basta malakas fan mo intake

    So far ok naman temps ko GPU on DLM21, mas ok vs my old cube case, lalo naka customize fan curve ko for PCIE gpu heat.
    DI pwede sakin Farah, kung sa DLM nga tatama na sa RAM ko yung AIO, mas maliit pa space sa Fara

    -- edited by ViperXtreme on Nov 21 2021, 05:05 PM
  • nakita ko kasi in person yung size ng fusion at sakto lang sa table para sana hindi na sa flooring yung pwesto


    thanks sir fakuryu and ignus check ko mga yan

    -- edited by GobiGobi on Nov 21 2021, 05:04 PM


  • BFTB itong fusion/im01 case ang dali magbuo, kung hindi lang ako naka 3.5" hd at atx psu ang linis sana ng build.

    -- edited by JDG on Nov 22 2021, 07:08 PM
  • got my 2nd CM NR400, time to migrate ^_^
  • ^Parang wala ng nag-iistock niyan locally, ang tagal pa ilabas ng CM yung kapalit na TD-300 Mesh.
  • ^ yes bro, bought both NR400s sa FB marketplace.
  • Post deleted #12402199
  • Post deleted #12402200
  • recent ko lang na realize na black silver/white pala mga pc innards ko, sinubukan ko lagyan ng lights, kaso cheap lights lang na di kaya mag full white.
    Need ko din kumuha ng mas maayus na cables, ano ba maganda?



    -- edited by ViperXtreme on Nov 30 2021, 04:42 AM
  • ^ binenta ko yung dlm21 ko mahal kasi tapos walang fan pinalitan ko ng tecware forge m. mas lumamig gpu ko
  • ^sold out siya sa mga retailers na pinag bibilhan ko dati, tapos online mas mahal pa siya vs dlm21 mesh. Also, ok naman GPU temps ko, mostly 70-75C overclocked to 2Ghz GTX 1070 pag full load kahit triple slot GPU ko, in comparison with my old case mas malamig ngayon, i assume na mas malamig pa pag mesh underside pero im fine with this for now. naka Auto fan curve rear 120mm ko and front 140mm pag heavy GPU load auto ramp up siya so hindi naman sakal sa hangin

    -- edited by ViperXtreme on Dec 01 2021, 12:05 AM
  • Available na locally itong DarkFlash DLC21 @2.9k Php


    Sana ganyan rin ginawa ng Tecware sa lower chamber ng Quad + tinted TG para hindi kita yung cables :(

    -- edited by Ignus on Dec 07 2021, 03:58 PM
  • New case from Darkflash, DLC31:


    Ginaya nila yun Lancool II Mesh, fine mesh PSU shroud + fan mount sa taas ng shroud pero solid yung upper half ng front panel(parang Phanteks Eclipse series yung top). May support for 140mm x 3 front fans kaya okay naman siguro yung CPU cooling kahit closed off yung top half ng front panel.

    Maganda ito for GPU focused cooling sa mATX builds. Sana ma-release sa local market.

    -- edited by Ignus on Dec 16 2021, 03:43 PM
  • Looking at Silverstone ALTA G1M at the moment...
  • For Cooler Master NR400 owners here, ano fan setup nila? I still have mine in stock config. I have two 140mm Noctuas sitting here but read somewhere na alanganin ang placement nung bottom fan sa front intake if 2x140mm. Thinking of getting the Lian Li AL120 para sakto na 3 120mm sa front intake.






  • Bagong palit ng front intake fans since bumigay na stock ng Fractal. Hindi ko parin mapalitan tong case since kailangan ko ng mATX na may 4-6 HDD cages :D
  • 3x120mm intake, 120mm rear exhaust, 120mm top exhaust. Bios-tuned.

    For Cooler Master NR400 owners here, ano fan setup nila? I still have mine in stock config. I have two 140mm Noctuas sitting here but read somewhere na alanganin ang placement nung bottom fan sa front intake if 2x140mm. Thinking of getting the Lian Li AL120 para sakto na 3 120mm sa front intake.
  • My JONSBO D30 case has arrived ... sorry for the low quality pics

    link to JONSBO D30 website > <click here for link>




  • ^Vented backpanel? Magkano inabot with shipping?
  • @Ignus

    yes can install 120mm fan at the back ...
    Mali-express has it for about p598x ... i got mine from ratsada for p605x ... so p50 difference

    compared to the CM NR200 just add an inch LxWxH
    compared to Tecware Fusion just add 0.5 inch LxWxH

    -- edited by chiboman2000 on Mar 07 2022, 08:08 AM
  • Anyone here still using Rakk Anyag? Tanong ko lang po if kakasya kaya Gigabyte RX 6600 na GPU sa case na to? Base sa specs and size ng GPU at case fit naman kaso nagaalanganin ako baka di siya kumaya.
  • Meron bang locally available na mga CPU cooler na may 92mm fan?
    Di kasi kasya yung mga regular tower coolers na may 120mm fan. :(
  • @awakeruze

    Meron bang locally available na mga CPU cooler na may 92mm fan?


    hsf, Cryorig M9A/I/Plus sa PCH
    hsf, Jonsbo HX6210 sa LZD
  • @fakuryu

    meron bang current available model ng matx cases similar to your case na marami hdd cages?
  • @thevoid

    meron bang current available model ng matx cases similar to your case na marami hdd cages?


    As far as I'm aware of, wala eh at naghahanap din kasi ako. Ang trend sa case design ay minimalism kasi at maraming mobo narin ang nagsusupport ng multiple m.2 drives kaya ang mga drive cages ng mga current cases ay usually 2x nalang talaga.
  • ^ is that available locally? Looks really interesting!
  • @vanguard

    thru LAXADA or Xhopee, just search for "d30 desktop" .... but prices right now are too much, when i bought my d30 case about 2 months ago, i only got it for 6k with shipping, it dipped to about 5,800 but now its 8k+ at LAXADA and 6,9xx at Xhopee. If you check ALIexpress its only about 3,700 but i don't know how much the shipping will be.
  • Masaya pako sa aking Fractal Meshify C Mini Dark Tempered Glass. Masikip lang talaga sa 3-fan na videocard. Kelangan tanggalin yung isang fan sa harap para magkasya hehe. Very good ang temps kahit summer.