What is a good durable brand ng servo type AVR in the market? Omni , Akari , Panther , Sieg , CDR King?

• jtiro on 15 Jan 20 @ 09:58 AM #

  good day. ask ko lang po, ung mga modern LED TVs ba ngayon advisable ba naka AVR? if yes, ok na po ba ung 500w rating?
  
  -- edited by jtiro on Jan 15 2020, 11:04 AM

• BCFreeman on 15 Jan 20 @ 10:37 AM #

  Halos 30 yrs na namin ginagamit ito:
  
  

• jonjonmd on 18 Jan 20 @ 10:01 AM #

  Hey guys, do you guys know where I can have this serviced? cubao area.
  
  Had it on 24/7 for the past 2 months. started to whirr and then some smoke came out. it didn't even shut itself off when it happened. barely using 200watts output at that time.
  
  
  

• Kimetsu on 19 Jan 20 @ 08:33 PM #

  Hello, ask ko lang, ok po ba yung Secure AVR for TV? Nakalagay sa description AVR+Surge protection na. Kelangan ba may Fuse yung AVR na bbilhin? Thanks po!

• sleepygeepy on 20 Jan 20 @ 05:11 AM #

  @jonjonmd
  

  Hey guys, do you guys know where I can have this serviced? cubao area.

  
  You might want to check this shop...
  
  FixMaster Electronics Service Center
  http://www.fixmasterelectronics.com.ph/our-services/industrial-electronics-repair/
  

  Automatic Voltage Regulator (AVR)
  
  
  We provide an OEM level of quality service at a competitive, non-OEM price. We have the ability to repair and calibrate many AVR units from many different Manufacturers. With our state-of-the-Art technologies and dedicated technicians, our staff is able to ease the pain of any repair service order.

  
  They have a branch along broadway avenue corner aurora boulevard. Try inquiring and see if they can service your Stavol AVR.

• Den807 on 21 Jan 20 @ 04:07 PM #

  hi just wanna ask kung san nakakabnili ng original na STAC na avr? meron kasi ako nakita sa lazada si tyson electric industries, legit ba yun? thanks!

• tagasubok on 21 Jan 20 @ 08:09 PM #

  ^
  mukang legit naman po yung sa lazada. nagulat ako sa price lol
  nung bumili po ako nyan sa isang electronics store sa evanghelista st. sa may raon, manila,
  P1,500 lang po bili ko sa 500 watts AVR
  nung 1985 :)
  gamit ko pa po hanggang ngayon :)
  
  
  
  
  *medyo naloko lang yung voltage meter (300 volts na daw, pero 220 pa din sa multitester) :)

• sleepygeepy on 22 Jan 20 @ 12:51 AM #

  hi just wanna ask kung san nakakabnili ng original na STAC na avr? meron kasi ako nakita sa lazada si tyson electric industries, legit ba yun? thanks!

  
  Try asking 5TH Avenue Electronic City / AVESCO, I know they sell original Japan made STAC servo AVR's and can also provide original Stavol brand servo AVR's.

• Den807 on 23 Jan 20 @ 12:31 PM #

  Thanks try ko nalang dumaan muna sa 5th ave na store, yung phone kasi nila di na gumagana eh

• AhohoBalaTimoJan on 26 Jan 20 @ 11:59 AM #

  Good morning po sa lahat. May prob po ako ngayon dito sa pc ko, current naka PROLINK UPS po ako pero tuwing hapon nag clicking sound siya at yung monitor namamatay matay at tuloy2 ang clicking aound. May nag wielding po yata dito kasi may ginagawang subdivision sa likod namin. Mawawala po ba tong clicking sound if bibili ako ng servo motor avr?
  
  Bale po Wall Outlet>Servo Motor AVR>Prolink UPS >750W PC
  
  Thank you po sa makakasagot or maka advice po.

• sleepygeepy on 26 Jan 20 @ 08:40 PM #

  @AhohoBalaTimoJan
  
  Most likely yung UPS mo walang built-in AVR so nag switch lang siya to battery kung may power outage.
  
  Possible na defective din siya at hindi na siya nag switch to battery mode. Pwede mo naman i-test by unplugging it from the wall outlet para malaman mo kung working pa siya ng maayos. Kung hindi na siya nag switch to battery or namamatay din PC mo, then baka kailangan pa-service mo na yung UPS.
  
  When testing the UPS, check mo din yung PSU mo kung may naririnig ka na buzzing sound or coil whine at baka incompatible siya with the UPS.
  
  Kung hindi naman madalas ang brownout sa inyo, suggestion ko skip mo na ang UPS and go with surge protector + servo AVR.
  
  Wall Outlet >> Surge Protector >> Servo AVR >> PSU, monitor, and peripherals

• jtiro on 27 Jan 20 @ 04:11 PM #

  mga sir. ok po ba ung panther avr? planning to buy para sa tv namin. nakapag check na din ako sa site nila. ung relay type avr.
  
  sapat na ba ung 500VA? with or without power on delay? thanks

• sleepygeepy on 27 Jan 20 @ 04:43 PM #

  @jtiro
  
  Go for the servo AVR model (Panther PSV-500) kasi ang servo AVR kaya mag-adjust ng voltage in fine increments at mag stay as close to 220 volts as possible. Also ang mga modern HDTV are sensitive electronic devices kaya mas maganda din kung servo AVR gagamitin mo sa kaniya.
  
  Ang relay-type AVR hindi nag-adjust ng voltage in fine increments dahil parag nag step-up / step-down lang siya between voltage ranges (+20 volts or -10 volts). Pwede naman din ang relay AVR sa TV pero alam ko mas recommended ang relay-type AVR para sa mga motor driven appliances tulad ng refrigerator, aircon, washing machine etc.
  
  Kung medyo mahal ang Panther servo AVR, also look at other models tulad ng Meiji, Izuki, china version ng STAC or STAVOL, and other brands na mas affordable.
  
  For a TV only sapat na siguro ang 500VA servo AVR. Pero kung plan mo din mag-add ng ibang devices tulad ng soundbar or pre-built home theater system, baka mas sulit na bumili ng higher rated model.

• jtiro on 27 Jan 20 @ 05:06 PM #

  @sleepygeepy
  
  thank you sir sa inputs. hindi pa kasi ako nakapag canvass pero kung nasa 2-3k budget kaya naman siguro. and yes plano ko din mag add ng soundbar sa susunod. 500VA or 1000VA na lang siguro. saan po ba ok tumingin/bumili ng mga brands na yan?
  
  ung isang avr pala namin sa bahay ay wixim servo type 2000VA, gamit sa TV at home theater din.

• frequenzy on 27 Jan 20 @ 05:10 PM #

  cnu dito may cdr-king 1000VA servo avr? I can't believe it's still working, purchased it 2009 ata para sa panasonic plasma tv namin. di ako makapaniwala sa tibay, both avr and tv gumagana pa at gamit nila erpats.

• axelangel007 on 27 Jan 20 @ 05:26 PM #

  cnu dito may cdr-king 1000VA servo avr?

  
  
  ako meron
  
  
  
  
  page 2 nitong page.post ko nung March 19,2012
  <click here for link>

• sleepygeepy on 27 Jan 20 @ 05:32 PM #

  @jtiro
  
  Sa Raon mas maganda tumingin kasi mas madami choices and pwede tawaran ang price. Pero hassle din pumunta sa Raon especially kung mag commute ka lang at plan mo i-handcarry ang servo AVR which can be heavy.
  
  Pero kung gusto mo yung mas convenient, try mo nalang sa mga mall based hardware shops tulad ng Ace Hardware, Handyman, and others. Minsan meron sila Panther brand or Meiji brand na servo AVR at pwede mo din i-test sa shop. Also try mga electronic shops like Avesco 5th Avenue or mga home theater shops at minsan nag sell din sila ng servo AVR. Sa mga online shopping websites available narin mga servo AVR, pero I recommend going to the shop directly para pwede mo i-test ang unit.
  
  Yung Wixim servo AVR looks to be OK at parang kapareho niya yung generic china made na Stac or Stavol servo AVR.

• jtiro on 28 Jan 20 @ 09:11 AM #

  @sleepygeepy
  
  pwedeng dayuhin ang raon sir, qc area lang naman ako. hehe. baka sa raon din bumili si erpats nung wixim. try ko din mag check sa mga diy stores sa mall.
  
  na check ko price ng panther sa l@z@d@, medyo pricey din pala ung servo type nila. gang relay type lang budget ko if mag panther ako. else, ibang brand ang kunin ko if mag servo type ako basta pasok sa budget. hehe. isip ko pa kung 500VA or 1000VA kunin ko at kung relay or servo type. if ever sa TV at soundbar ko lang naman gagamitin.
  
  -- edited by jtiro on Jan 28 2020, 02:41 PM

• viajero91 on 01 Feb 20 @ 11:20 PM #

  Guys, I need help.
  
  Just bought a MEIJI AVR today, model SVC 1500 from SM.
  
  Nagamit ko for the first time for about 30 minutes, plugging in a TV and a soundbar. I wanted to turn off the sound bar dahil news lang naman ang papanoorin ko, para TV na lang ang gagana. So after I turned off the sound bar, automatic din nag-turn off yung TV na hindi intended to be turned off.
  
  Nagtaka ako bakit sabay nag-turn off yung sound bar and TV which are both configured with HDMI CEC turned off.
  
  When I tried to turn on the TV, ayaw na. I turned off the Meiji AVR, then turned it on again. Waited for more than an hour, wala pa ring power output to my TV. The QUICK START button at the back appears to be not working. I tried to turn off and turn on the AVR again. Still, nothing.
  
  This is a new AVR. Not even a day used. Did i miss something? Or is it new but already defective?
  
  Any response will be appreciated. I'm frustrated already.

• Peorth on 02 Feb 20 @ 02:11 PM #

  ^Malamang "lemon" yan or defective item, ibalik mo na sa SM para mapalitan.

• bootsector on 02 Feb 20 @ 03:22 PM #

  I've been using Secure 1000w servo avr for over 2 years. Okay naman performance niya. Meron din 500w. It's available in PCE****ss.
  
  My other Meiji 500w faulty na bypass switch but in good condition servo function & time delay.

• sleepygeepy on 02 Feb 20 @ 10:42 PM #

  @viajero91
  
  Chances are defective yung Meiji servo AVR unit na nakuha mo, and it might be worth having it exchanged sa SM.
  
  When my Meiji servo AVR was brand new (SVC-1000 model) I noticed that the rear power bypass switch was a bit wonky. You had to press it a couple of times or depress it a few seconds longer before it would bypass the time delay. Now it works smoothly even with one press.
  
  Also the time delay is unusually long for my servo AVR, I think it takes around 10 - 15 minutes before the AVR is powered back up. Most of the time I don't wait and just press the bypass switch at the back when there is a quick brownout.

• viajero91 on 03 Feb 20 @ 07:11 AM #

  @Peorth @sleepygeepy
  
  Thanks, guys. I returned the Meiji AVR and got a replacement for the same model SVC 1500. Now observing how it performs this time.

• viajero91 on 03 Feb 20 @ 07:18 AM #

  @bootsector @sleepygeepy Pansin ko rin, medyo flimsy nga itong bypass switch ng Meiji.
  
  

  I've been using Secure 1000w servo avr for over 2 years. Okay naman performance niya. Meron din 500w. It's available in PCE****ss.
  
  My other Meiji 500w faulty na bypass switch but in good condition servo function & time delay.

  
  
  -- edited by viajero91 on Feb 03 2020, 07:20 AM

• jtiro on 03 Feb 20 @ 10:26 AM #

  question lang. may mga suggested shops ba kayo sa raon na ok puntahan? baka ung stavol brand na lang kunin ko. else mag meiji ako. thanks
  
  -- edited by jtiro on Feb 03 2020, 01:43 PM

• viajero91 on 05 Feb 20 @ 06:27 PM #

  @jtiro
  
  Try mo yung stocks ng AVR sa DEECO

• viajero91 on 05 Feb 20 @ 06:32 PM #

  FUJIDENZO AVR
  
  This brand advertises their AVRs are "Built with 100% Copper Coil & Servo-motor." Ito sana ang bibilhin ko prior to buying the MEIJI. Masyado lang kasing matagal ang online delivery sa La_a_da kaya sa mall ako pumunta.
  
  Anyone has tried this brand that is Japanese-owned?

• gaLj on 05 Feb 20 @ 07:45 PM #

  mga sir. ok po ba ung panther avr? planning to buy para sa tv namin. nakapag check na din ako sa site nila. ung relay type avr.
  
  sapat na ba ung 500VA? with or without power on delay? thanks

  
  
  For tv, medyo useless na rin ang AVRs. Most modern tvs Auto-volt na nanaman. AVRs doesnt really offer a lot of protection, maliban sa power on delay.
  
  

  Wall Outlet >> Surge Protector >> Servo AVR >> PSU, monitor, and peripherals

  
  
  Glorified extension cord lang ang surge protector without proper the grounding.
  
  -- edited by gaLj on Feb 05 2020, 07:45 PM

• sephy on 08 Feb 20 @ 06:28 AM #

  Ok lang po b if sa extension nakasaksak ung avr? Thanks

• YohanSeals on 11 Feb 20 @ 10:56 AM #

  May Seasonic S12III 650w ako at APC BX625CI-MS 625VA, 230V ako.
  Need ko pa ba bumili ng Servo AVR at surge protector?
  Ano suggestion niyo na brand at specs na bilin ko?