@killah
snort is an ids/ips so for lan going outside sya
@XPC42
tiga saang EAC ka? pde kitang daanan kung tiga dasma ka. Moving forward, basic lng yan ano ba ililimit mo?
Forum Topic
Unified PFSense Users
-
DHCP lang ba talaga ang kay WAN? Pa enlighten naman sa OO at HINDE medyo confusing.
WAN connection accepts PPPoE/A, Static and Dynamic, WAN interface can also authenticates via Radius server but almost no one uses Radius as their mode of authentication on WAN interface except on certain FTTH connection of AT&T in USA.
But since nasa pinas lang naman usuall its just PPPoE, Static of Dynamic.
PLDT depending on the plan, residential plans uses DHCP, Business Plans uses PPPoE with static IP
Globe uses PPPoE connection for residential plans and static IP for business plans
Protip for globe connection: if youre globe modem is in bridge mode and you let pfsense to authenticate to their PPP server make sure to check the Block Bogons network option, since for some reason, Globe randomly leases 10.xx IP which you will have no internet connection at all, checking the block bogons network will fix this 10.xx IP leases, pfsense will automatically reconnects to globe until it gets a valid IP address 100.xx for globe residential under cgnat.
Pwede bang ilagay ko dito public IP sa WAN1 & WAN2?
you can if your ISP is leasing Public IP via DHCP connection, else contact your ISP to avail a static IP instead since thats the only option you will get a public routable IP address.
sino po gumagamit ng snort dito?
wan >wan
opt1>wan
opt2>Lan
Tama ba na sa LAN interface ko lang siya ilagay?
it depends, for me I usually set it on exit nodes which is the wan interface since I have gazillions of vlans if I assign them on each network, in your setup since iisa lang naman yung LAN interface mo and no VLANs either, just set it to LAN. -
@polka
thank you sir -
mga boss anu pde magamit na mini PC for pfsense[2lanport] TIA!!
-
^ Been using an Intel DQ77KB for more than 2 years now. Thin MiniITX with Dual Intel GB ports.
Got it on FleeBay around $30. -
Masters,
Check ny naman itong image. Ano kaya ang problem..
<click here for link>
ngaun lang nanyari sakin ito. 3 years na ang PFSENSE ko...
ang model ng computer ay HP compaq Pentium D, 500GB,512 ddr2. More than 8 years na siguro ito. -
^ If you look closely sa error codes, it points to a faulty drive or faulty SATA cable.
-
^
Sana faulty SATA cable lang. Napaka hirap na kasi maghanap ng 500gb ngaun.
Thanks -
DRDY SERV ERROR
most likely a faulty hard drive/boot drive.
replace the drive and reinstall pfsense. -
mga master sa pfsense captive portal, help me to solve my issue re sa voucher ng captive portal sa pfsense, i generate voucher ticket then nilogin ko sa cp and success naman, then login ko din sa ibang cp ung voucher code na nalogin ko sa unang cp pumasok din, at sabay sila nakakaaccess.... sana may makatulong...thanks
-
mga master sa pfsense captive portal, help me to solve my issue re sa voucher ng captive portal sa pfsense, i generate voucher ticket then nilogin ko sa cp and success naman, then login ko din sa ibang cp ung voucher code na nalogin ko sa unang cp pumasok din, at sabay sila nakakaaccess.... sana may makatulong...thanks
gusto ko din malaman paano mo pinagana ito sir -
@shan
Hanapin mo yung option “disable concurrent login” solve na agad issue mo. Di bale pag naka enable yan once maybibang gumamit ng code automatic logout yung current session at ang gagana lang yung recent login.
@tj
Youtube -
anyone has used snort here?
thanks! -
Ask ko lang po may training po ba dito sa pinas ng PFSense?
Thanks po -
hi.. newbie here im looking for Pfsense installer.. i already have existing pfsense pero yung technician hindi tinapos yung setup. maayos naman siya nung una kaso merong nagkabit ng new router sa ibang department kaya nagloko yung network namin ngayon ay hindi na namin magamit.. kung meron dito marunong sa dedicated pfsense please pm me or sms me @09493974556. thank You
-
@Ostertag1324
Join mo as WAN 1 or 2 (etc..) sa PFSENSE ung ung bagong router. Make sure PFSENSE ang nag de-distribute ng IP Addresses(network) -
Pahelp namn po sa PFSense, hindi po gumagana ung captive portal sa wifi.. pero sa LAN gumagana. paano po ba ung setup niyo ng pfsense para sa wifi.. sana may makatulong
-- edited by 2kkalias2015 on May 08 2018, 01:37 PM -
mga idol baka sakali may interesado sainyo libreng network basics webinar check nyo na lang sa Facebook: <click here for link>
-
Question lang mga PFSense Users.
DHCP Server
in my thinking eto yung mga dapat kong Statis ARP diba?
1. Servers
2. Industrial Printers
3. Access Points
4. Core Switch
Then dito naman papasok yung pag gawa ng Pools tama?
Ex.
Pool 1 (Servers)
192.168.1.1 - 192.168.1.10
Pool 2 (Network Printers)
192.168.1.11 - 192.168.1.20
Ngayon pa lang ako natapos mag structured cabling here in company (November 2017 - June 2018) hehe kaya planning to set up na tong mga to (ako ho yung nag popost at tanong dito for proper planning setup..)
Thank you!
P.S eto yung isa sa nakita kong magandang tuts, credits sa owner Mark Furneaux:
<click here for link>
-- edited by dorkpeanut12 on Jun 05 2018, 03:22 PM -
^why do you need to put your network printers on different subnet?
is it better just put it on a same subnet where the computer will use the printer?
if youre worried about another user using it, most of the printers have configuration allows you to which only mac address/computers can use the printer. -
@polka
Sets of example lang po yan sir.
Bali yung concern is after static arp yung mga devices (if needed only) standard bang mag pool ako? -
well, ill only do static arp with something important like your server or something. for the rest of the network, I dont really care if its static arp or not.
-
Mga boss patulong naman po sa gusto ko setup sa office namin. As of now we are using pfsense as our firewall/router and may zimbra open source kami as email server connected to PLDT Fiberbizz. Magpapakabit kami ng Globe Business Fiber as second/backup ISP. How to setup dual wan using both ISPs?
-
^all you have to do is plug the globe fiber to your pfsense on a spare nic, assign a interface on it and set it as PPPoE (afaik this is their primary connection type) and enter the ppp credentials (consult globe for that if you dont know what that is)
of course before doing that, make sure to let know Globe to set that ONU to bridge mode.
after that consult here for failover setup <click here for link>
basically the only thing left now is assign a gateway group and set the weight from your globe connection as low as possible (eg primary PLDT set to 2 and Globe set to 1) then what left is set your LAN(s) to set the gateway to your gateway group (adjust it under Firewall > Rules). -
meron bang naka experience sa inyo na ayaw ma download yung attachment from gmail?
off na lahat ayaw parin , pero nakaka download naman
pag direct sa ISP modem na da download naman.
-- edited by dawinsm on Jun 26 2018, 03:24 PM -
no issue for me.
using PLDT fiber. -
meron bang naka experience sa inyo na ayaw ma download yung attachment from gmail?
off na lahat ayaw parin , pero nakaka download naman
pag direct sa ISP modem na da download naman.
Sa Home-based work ko madalas kame gumamit ng Gmail/Gapps smooth naman using PLDT Fiber and Converge Fiber ISP both 50mbps. -
meron ba naka experience ng mahirap mag find match sa tekken 7? sabi kasi nila strict nat daw siya kaya ang mafind match nya yung mga nakastrict nat din..
triny ko siya irekta sa modem madaling makahanap pero pag dumaan na ng pfsense hindi na makafind match..meron po ba makakatulong? willing to pay po pm me lang po salamat - Post deleted #12143474
- Post deleted #12146588