Visit the Forums
Register Now!

User Login


Forum Topic

Fractal Design Case Users Thread

  • Post deleted #11716296
  • Hi guys,

    I hope you could help me here.
    Just recently bought an Arc Mini R2 and I decided to buy another 120mm fan as an additional front intake. I bought the Corsair AF120 Quiet Edition but the screws won't seem to fit on the screw slots in the front panel. Do you guys know anyway to fit it? Or is it alright to use a different screw?

    Thanks :)
  • you can try a different screw. Or drill a wider hole on the screw slots.
  • The actual screw threads fit. Its just the head doesn't push through in the slot.
    Do you know where I could buy case fan screws?
  • it will fit. it seems no to fit at first because of the rubber thingy on the screw holes on the fan. try loosen up the screw holes first before you install it to your case.
  • I mean the screws to the slots on the case. The front panel has some fan screw "slots" "bags". The screws that came with the Corsair AF120 head doesn't fit in the slot. And so I couldn't really tighten it enough for the screw to reach the thread of the fan.
  • @melbourne47






    try mo yun ganito sir
  • @ melbourne47

    Yup it wont fit. Kala mo okay na pero bigla uli malaglag. Use the generic ones that came with the case. Swap mo sha sa kasama nung Corsair.

    -- edited by joxsfunk on Jul 25 2016, 05:28 PM
  • Sino po naka Fractal Core 500 dito? kamusta po airflow and temps? thanks!!!
  • @JLSantiago
    Thanks :D, I'll try to look for that around my workplace. Around Ortigas, near Megamall. If may alam ka na shop that sells that near my workplace, could you pm me? Thanks again :)

    @joxsfunk
    Are there extra fan screws included? Parang wala ako nakita dun sa screws set. Puro for HDD and SSD tapos thumb screws.

    EDIT:
    In case anyone else has the same dilemma. I switched the screws from the rear fan to the Corsair AF120 and I was able to install it on the front panel.

    -- edited by melbourne47 on Jul 27 2016, 09:28 AM
  • @ melbourne47

    Yung stock ng arc mini sa back / top yung gamitin mo sa front para sa Corsairs. Tapos yung kasama ng Corsair ang gamitin mo para sa back / top fans.
  • Pinaka painless build ko so far. Ang dali ng cable management pala ng Define R5.







    Sobrang tahimik kahit gaming or benchmarking at gusto ko yung monolithic and subdued appearance niya. ^_^
  • ^
    Very nice case sir, saan mo nakuha yung non-windowed version? Parang alam ko ang hirap makahanap ng non-windowed version ng Define R5 :-)
  • ^ Thanks sir! Sent you a PM.
  • Hi there, may mga user pa ba ng Fractal Core 1000 dyan? Tingin naman po.

    Baka may mas masuggest pa kayo na Compact other than FD Core 1000?
  • @rhei24

    micro atx thread
    <click here for link>
    itx thread
    <click here for link>