acl safe_ports port 80
acl safe_ports port 21
acl safe_ports port 443
acl safe_ports port 70
acl safe_ports port 210
acl safe_ports port 1025-65535
acl safe_ports port 280
acl safe_ports port 488
acl safe_ports port 591
acl safe_ports port 777
acl connect method connect
some further testing on multiwan3 on openwrt, it became a headache when it comes to google (and its services) bumagal yung response ng mga site nila, my work around is add the google ip subnet 103.233.38.0/24 and 122.2.129.0/24 and make sure to set the connection to Sticky with at least 1200seconds, this fixes the slowdown issue, maybe google just hates visiting their website with 2 or more internet access.
my current setup
* 4 WAN (1fibr 2mbps and 2 WiFi and 1 3G)
- WAN 1-3 (Wifi and 3g) gets load balance
- WAN 4 (Online game only)
I get sustainable 10mbps download speed on p2p downloads and multiconnection direct download, speedtest also hits 10mbps (after few retries, since it doesnt always goes that high, most of the time I only get 6-7mbps).
I can also do online games while download at full blast without lagging. Since my WAN4 is for games only.
^ official name nya is multiwan3
pag sa openwrt repository, name nya is mwan3, or app-luci-mwan3
see screenshot above.
from what I observe, setting this one up is easy, lalo na kung familiar ka how pfsense loadbalancing works, sa pfsense nga lang medyo clutter yung mga configuration, with this, nasa iisang area lang sya, maganda pa dito meron sya policies which you can group which wan interface will do etc...
then dun sa traffic rules, this is where the magic happens, sample ko ito.
^For Tomato I use RT-N10u, CW5356u, RT-N16, RT-N18
For Openwrt, I use Huawei HG556a Version B (it's a ADSL router modem).
kung maghahanap ka ng router na meron support ng mwan3, you need at least a router with 8mb flash (or 4mb flash with USB drive to extend the space using extroot) and most important a configurable switch that let's you adjust the port assignment on the router, if youre router doesnt support VLAN pretty much that router is SOL for mwan3.
unfortunately, due to incomplete modules in tomato shibby, a dual wan is impossible out of the box without modifying the firmware, unless you use the chinese version multi-wan tomato firmwares or the bundled stock firmware on cdrking dual wan firmware which is actually buggy (it works but not the same way as mwan3 can do, sa cdrking dual wan, hindi kaya ma combine yung 2 ISP sa speedtest, sa mwan3 with openwrt, pwede, as long as ma chambahan ng routing policy yung wan mo. sa speedtest kasi it only opens about 5 connection so if those 5 connection managed to spread out on those wan interface you had, makukha mo yung tamang combined speed) of course routing policy on cdrking dual wan firmware is impossible without intervening with "ip rule" and "ip route" which I already provided here para sa mga cdrking dual wan firmware who wants to use this router to separate 2 internet connection from browsing/downloading/streaming to gaming.
sir anong router ma recommend nyo para sa mwan3 with openwrt.
A TP-LINK TL-WR1043ND hardware version 1.10 router (ar71xx platform) (tl-wr1043nd) using OpenWrt 12.09.
A TP-LINK TL-WDR3600 router (ar71xx platform) (tl-wdr3600) using OpenWrt 12.09.
A openwrt 12.09 mips metarouter over a mikrotik r493g routeros 6.27 (mikrotik_metarouter_openwrt).
A NetGear WNDR3800 router (ar71xx platform) (wndr3800) using OpenWrt 12.09.
sir o kaya ano pinakamaganda sa apat na to. pang combine.
kung may alam kaung bilihan sa us ung mura.
thanks sir
Both supports CC builds (Chaos Calmer) which is the firmware im currently using so sure na gagana dyan yung mwan3. It may work on trunk, BB and AA builds but let's be safe na lang that im familiar of so yeah...
I checked the price of those routers, they were almost as expensive as Tplink multiwan router (a router that specifically designed for multiple wan internet connections). You might as well consider buying that one instead.
Dec 8 15:50:19 omkenken daemon.info dnsmasq-dhcp[18450]: DHCPREQUEST(br0) 192.168.11.22 20:02:af:c5:94:da
Dec 8 15:50:19 omkenken daemon.info dnsmasq-dhcp[18450]: DHCPACK(br0) 192.168.11.22 20:02:af:c5:94:da android-ebe047ae1149a16b
Dec 8 15:50:19 omkenken daemon.err dnsmasq-dhcp[18450]: failed to write /var/lib/misc/dnsmasq.leases: No space left on device (retry in 60s)
Dec 8 15:51:19 omkenken daemon.err dnsmasq-dhcp[18450]: failed to write /var/lib/misc/dnsmasq.leases: No space left on device (retry in 60s)
Dec 8 15:52:19 omkenken daemon.err dnsmasq-dhcp[18450]: failed to write /var/lib/misc/dnsmasq.leases: No space left on device (retry in 60s)
Dec 8 15:53:19 omkenken daemon.err dnsmasq-dhcp[18450]: failed to write /var/lib/misc/dnsmasq.leases: No space left on device (retry in 60s)
Dec 8 15:54:19 omkenken daemon.err dnsmasq-dhcp[18450]: failed to write /var/lib/misc/dnsmasq.leases: No space left on device (retry in 60s)
for your error, check your dhcp lease scope baka maikli lang at halos lahat na occuped na sa mga devices mo by default you can assign upto 50 computers with default scope ng tomato. check device list kung ilan na yung mga devices na na lease ng dhcp server.
@jarhimura
Meron naman, it can combine speed also, meron ka lang gagawin dun sa setting (it's just a 1 check box to enable it), pero this will break the compatibility specially for google, ayaw ng google na meron kang 2 or more wan IP address requesting on their server with same browser, thankfully, mwan3 has a option called Sticky option which makes the connection stick to single IP after a few seconds.
I just wanted to tell you that i`m working hard and almost finish mutliWAN support. Tomato will support max 4 WANs for routers with 64KB of nvram and probably 2 WANs for 32KB of nvram routers.
My work is based on TomatoMultiWAN writen by Arctic (https://code.google.com/p/tomato-shibby-arctic-chs/).
antayin n lng muna ung official release ni shibby ng multi WAN firmware para di buggy ung default dual WAN ng cdrking or bumili ng tplink load balancer para mapadali ang buhay
guys, paano po ang configuration kapag may ilalagay akong Wireless Repeater?
I followed one config which is similiar config also to other sites. Nagcoconnect siya sa main wireless router ko, kaso hindi makasagap ng data (download/upload)
