@alonsomarcin
nag complain/tanong kana ba kay gigabyte regarding sa issue mo?
Forum Topic
Gigabyte motherboard problem
-
@mujahko
Nagcomplain na daw si TS, wala paring feedback.
Curious din ako sa mangyayare dito, since pwedeng gamiting reference ng mga Gigabyte users na nakabili ng \"subpar\" boards. -
yung kay teraboy same model doon sa nagawan ng review. hahaha!
-
Good evening po. Share ko lang din yung nabili ko. H81M-DS2 v2.1. Oo nga di ko alam na ganito pala to. di kasi nilalagay kung anong revision yung nasa ad. so binili ko lang kahit di masyadong tumitingin sa changes. Parang medyo madaya ata na hindi nakalagay sa mas kitang lugar yung revision version niya. :(
Magreresearch pa ako dito sa net kung ano performance nito tsaka kung ano yung pa yung mga dinowngrade nila. :(
-
Shame shame... tskkkk.. ngrrevision naman talaga kahit ibang brands pero hindi ganyan kadami un tinatangal na pati un buong performance ng mobo bumaba na. Kung gnyan lng din dapat gumawa nalang sila ng bagong model ibahin ang model name.
eto kalat na ngawa nila sa buong mundo- B85 chipset--> <click here for link>
\"After some comparisons the boards and indeed, revision 2.0 of the board have downgraded, one phase less, cheaper components. After putting it to the test, it became apparent that the performance of that motherboard is slower as well. It is mentioned that the Rev 1.0 B85M-HD3 motherboard does throttle back the CPU and measured MOSFET temperatures around 80°C during video transcoding. Now, for revision 2.0 it takes merely 6 minutes before the board throttles the CPU back to 800MHz as MOSFET temperatures of 105 to 112°C have been reached due to the hardware differences.\" -
Just to update. Still no feedback from DTI. PH govt talaga oh. :(
Anyway, nabasa ko yung point nung mga ilang reviews. and binanggit nila yung EAN number. Pakita ko na rin dito na yung nabili ko ay same ang EAN number for two revisions. We don\'t really look at them, but stores do.
Kaya siguro nagkakamali yung ibang stores sa pagpopost ng ads nila kasi akala nila same EAN number is same motherboard pero di na pala. Probably what happened to me and to others dito na nakakbili nung revised mobo ng gigabyte.
-- edited by alonsomarcin on Jan 07 2015, 12:18 PM -
About EANs... actually di ko alam kung ano yan. Hahaha! although gets ko problema mo. Suggest ko diyan sulat kasa sa gigabyte, ala maalala mo kaya tapos ireklamo mo yan. Or actually kahit di na kasi kalat na to sa ibang bansa. reviewhin mo kaya performance ng dalawang models na yan? Parang yung sa isang review. naprove nila na hindi okay yung revision nung gigabyte. hehehe.
-
anlaki rin nakalagay na revision sa box sa post ni alonsomarcin. maliwanag naman. hindi talaga fault ng gigabyte yan.
-
Sino po ang may alam kung ano ang RMA process ng gigabyte dito? Nag inform na kasi ako sa distributor nila, covered pa ng warranty nila ang motherboard ko pero ayaw na mag reply kung ano ang RMA process nila. :(
-
relanrealn
you may contact their service center after the holidays or you can also email [email protected]
TECHSQUAD
Unit 106 G/F M.BLDG
26 N. Domingo St Quezon City
412 -0387 -
Magkaiba talaga kapag magkaiba ang revision number.
Noong naghahanap ako ng mobo. Napapansin ko karaniwan yung revision number. Iba-iba ang cater nila. Meron revision that caters the legacy hardware. Meron yung makiuso, meron para sa highend. Meron favor sa usb 3. Meron din tungkol sa bios keen enthusiast. Meron sa gpu.
Dito rin mapapansin mo na yung pinakakumpleto sa mga cater nila ang parang base board nila.
Kaya kung bibili, tingin sa revision number at hardware at kung ano ang specific na kailangan mo. Kung ang tindahan na ayaw patingnan ang loob ng box nila para masabi na hindi na bago or originally unboxed item. Eh Huwag ka na magpilit bumili ng pahula kung ano ang talagang nasa loob.
So kung nawala yung ibang component kasi hindi yun kailangan sa revision na iyon. Kasi extra features equals extra cost. At pampamahal para sa end consumer. Katulad rin na kung gusto ko yung uso ngayon at hindi na gagamit pa ng mga legacy hardware bakit ako magbabayad ng extra kung hindi ko naman kailangan ng PCI slot, serial at parallel port na hindi ko naman gagamitin but the board have. Yan ang nakikita ko kung bakit maraming revision number. -
@rushjudge:
Malaki kasi zoomed in na syempre. Haha!
Anyway, I\'ll believe the review and statements made on these. Salamat sa nagpaalala sa akin nito sa FB. <click here for link> Hopeful for an official statement by Gigabyte on this one though.
If Gigabyte had provided a different product and EAN code for the Rev 2.0 and Rev 3.0 boards, as well as updated product photos to the shops, there would not be much of a problem as far as we\'re concerned. In that case it would be clear to everyone that these are new, different products where the specifications and test results of earlier revisions do not necessarily apply to the newer revisions.
Now however a shop or end user can order a board based on reviews of the original and receive a product that is clearly different and, as we illustrated in this test, potentially inferior. And that is very questionable indeed.
The analysis of the B85M-D2V is shocking as Gigabyte has removed a feature from the original list of specifications, i.e. Dual BIOS. It\'s like ordering a car from a catalogue and discovering a missing right hand side mirror on delivery: not acceptable.
With the B85M-HD3 at least on paper there seems to be less of an issue: all the original Rev 1.0 specs are present in Rev 2.0. To play devil\'s advocate: Gigabyte doesn\'t promise anywhere that the board comes with a 4-phase power supply. Still, even if it passes muster legally, this is hardly the way to do business. Our test results moreover show that the Rev 2.0 has a potentially lower lifespan thanks to its lower number of mosfets and without any doubt will deliver lower performance than the first version in normal consumer applications (such as video encoding).
<click here for link>
You see, Gigabyte doesn’t change the EAN/UPC codes for their revisions so the distributor who’s importing the motherboards (Ingram Micro in this case) has no clue about the changes and assumes it’s the original rev1.0 board. By keeping the EAN/UPC code the same across revisions, the dealer or distributor cannot identify the different versions in their stock and hence sell the newer boards for the same price.
In reality, the new versions costs a lot less for Gigabyte to manufactures since they’ve reduced the features and components but continue selling it at the same price, keeping both the distributor and end-user completely oblivious to what’s really happening. With such drastic changes, this qualifies the new versions to have completely different model name since it’s not the same motherboard anymore.
-- edited by jaroh_0517 on Jan 21 2015, 11:28 PM -
Maraming salamat @ultradurable. Nag email na ako sa kanila, sana may reply.
-
Hi guys, I finally met with the guys from DTI and the shop. Bale andami nilang nakipagmeet sa akin, mga lima from the shop, and distributor ata or mismong sa Gigabyte na. Fast forward to the explanation about the reduction of components, the R2.1 uses different components daw, according to the guy from tech guy... I think galing to sa repair center ng GB. Again, different components should merit a different review and performance, in this case mas panget performance ng \"different components\" nila... This should also have a different EAN/UPC code na.
Then there was another person who emphasized that the motherboard’s total cost of production isn’t something that we are all aware of (which is primarily why I had to complain), and thus, the company may make adjustments accordingly. He also said that the motherboard is actually an honest product, as unlike tech products with cases (he had iPhone and my laptop for examples), you can see what you have paid for. Itong \"honest product\" na to, definitely not the revision products, as proven by reviews and articles.
The two guys have somehow explained their side, although of course, feeling ko talaga hind masyadong naexplain kasi parang kung honest talaga yung product, bakit iba yung lumalabas na reviews? Tsaka yung issue pa sa EAN/UPC na kalat na kalat na ngayon.
Ang nakakainis lang ay yung reaction nung paralegal officer na kasama nila. She said that they are really busy, and acted as if they are the only ones who were disturbed by their advertisement inaccuracy. Customer kaya ako. Kung ayaw niyo magpaistorbo sa customer niyo, wag kayong magbenta.
Anyway, nakapag-agree na kami sa isang solution, pero the way they have explained to me is not that acceptable. - Post deleted #11348074
-
Since I only have 1 hour to mediate with them, binigyan na lang ako ng mas direktang kontak sa service center at sa disty. pag daw nasira, itawag lang dun. I was aiming for replacement, pero mukhang di ata aim ng DTI yun. More on \"mediation\" nga... Kung nasa US tayo palit agad to.
Di rin nakatulong yung shop, sobrang tahimik lang, inaasa doon sa service center yung explanation, dapat sila rin umaksyon kasi sa kanila ko nabili yung produkto. -
Meron sana ako ipa RMA na mobo na out of 1 year warranty pero pwede pa sa distro, singilin ako ni PC Hub ng P500 if ok daw for logistic
ok ba yun? - Post deleted #11363525
-
@ComPeter
thanks
na contact ko na si TechSquad muhkang ok nga kahit wala raw receipt -
mga sir meron din ako fm2 gigabyte na sira yung lan nya, months ko pa lang sya ginagamit nun, sa tabi ng pchub sa gilmore ko binili yon, pwede ko pa ba mapaayos yon??
-
^yes sir pwede pa yan! ganyan din nangyari sakin, sobrang okay naman yung service tapos until now alive and kicking padin yung A78 ko.
-
Mga IDOL need help, may malaking prob ako. yung computer ko kasi ayaw magbukas. ganito po mga nangyayare, pagbukas ko nailaw nman as usual and naikot mga fans for 2 secs then mamatay, then mabubuhay ule after 3 secs, ganun lang paulet2x wala dn beep and display sa monitor, natry ko na po palitan ang mga pyesa psu, switching(on/off), remove vs and hdd, remove ram, halos lahat tinanggal ko na pra atleast mag booth lang nman sya ng mas matagal, na try ko nadin na working psu and switch ko, so ang natitira nlng isa mobo and procie ko, kaya nagaalala ko ang mahal nun eh, patulong nman mga idol, wala kasi ko mapagtryan ng procie ko, tapos ang hirap nman malaman kugn yugn mobo may prob. additiional info nangyare yun after ko linisin system unit ko as in baklas lahap parang pag nagaasemble ka ng bago. then mg mga pins yung mobo na bended nanpasin ko lang. kaso hndi ko alam kung ayun ba tlga prob base sa nangyayare sa comp ko na on and off ng mabilis. salamat po sa mga magrereply
CPU: LGA1150 Intel Core i5-4460 up to 3.40GHz (Quad Core)
Mobo lga1150 Gigabyte GA-G1.Sniper B5
PSU: Seasonic S12II 620W 80PLUS Bronze (620W)
Ram: Ram Gskill Ripjaws X 8GB 4gbx2 DDR3 1600 CL9(F3-12800CL9D-8GBXL)
VC: none muna kasi nasira.
- Sa ngayon nabubuhay na, natuwid ko na mga bent pins ng mobo ko then may missing 2 pins, nabubuhay na sya at hndi namamatay, pero hndi ko na nagagamet wala pa kasi ko VC, kaso hindi ata lahat ng RAM slots ko is nagana, then ayaw mag boot pag wlang vc eh sira nman vc nilagay ko, ang weird lang eh may HMDI nman yung board nun so may build in.
Questions:
1. hndi ba yun delikado para sa ibang components ng PC ko lalo na sa procie at RAM?
2. mapapa warranty ko pa ba yun, mag 1year na yung mobo ko this november binili ko sa pchub sucat. - Post deleted #11516828
-
After ng installation ng Windows 7, nagr-reboot ang system. Yung sa part na mags-setup na yung Windows 7, nag-stuck lang daw po yung system dun sa may windows logo. Then after 5 seconds, reboot yung system. Paulit ulit na ganun. Tinry na din daw sa Windows XP, ganun lang din daw ang nangyayare. Reboot ng reboot after ng installation. Ano po kaya possible na problema? Sabi ng tech, may tama daw yung motherboard.
Motherboard: Gigabyte F2A75M-HD2 Rev 1.2
Patulong po sana :(
-- edited by xguinsoo on Dec 01 2015, 07:03 PM -
Mga boss, ask ko lang po.. Yung Gigabyte H61M-S2 kong Motherboard[b] ayaw na mag off ung power [/b]nya kapag nag shutdown ako naka ilaw ung mga LED Lights, keyboard, mouse at umaandar pa ung CPU Fan..
Ganito po kasi nangyari, nagpartition kasi ako ng LOCAL DISK C using Partition Wizard, nung nag papartition na sya sa BIOS, ang tagal tagal so ginawa ko nirestart ko nalang.. nung nag shutdown na ko.. dun ko napansin hindi namamatay ung power kahit wala na display sa monitor ko..
sinubukan ko na mag BIOS Recovery, ganun parin,, sinubukan ko narin tanggalin CMOS Battery at CLEAR CMOS, still the same.. sinubukan ko narin mag update ng BIOS using Q-FLASH ng gigabyte.. but still the same.. :(
Paano po kaya maayos un? wala na ksi ako makitang 1156 na Mobo at buo pa naman sya.. nakakahinayang naman kung papaitan..
Thank you po sa sasagot. God bless! -
GIGABYTE B150M-D3H / DDR4
mga sir baka may idea kayo.
nakapag-install nako ng windows 7 ultimate 64 bit pero pag nag-install nako ng drivers na cd nya mismo gamit eto lumalabas
"object doesn't support this property or method"
line: 20
char:2
url: file///E:/UI2.js -
Yung Gigabyte motherboard ko na GA-F2A75M-D3H , pag press ko ng power on, mag on lang sya for a 1sec or a split second then off na uli. (ikot fan ng psu and system fan for a split second then off agad). Pag sinubukan uli i-on, no response na. Pero pag inunplugged ang ac cord, then plug uli, ganun uli. Tried another psu, ganun din. Tried with everything disconnected including processor, as in psu and motherboard lang pero ganun pa rin.
Sira na po kaya motherboard? purchased 3yrs ago.
-- edited by carlo125 on Jul 28 2016, 02:50 PM
-- edited by carlo125 on Jul 28 2016, 02:50 PM