Forum Topic

Intel Core i3 / Core i5 / Core i7 Thread (Skylake - 100 series chipset - LGA 1151)

  • Hi, I noticed 10-11C differential on temps on my laptop CPU and I was wondering if repasting will solve this issue or its a problem with the core itself?

    Max and the average temp have constant 10C differential, but in idle cores stay the same temps maybe 1-2C difference only. The CPU is already undervolted by -0.120mV using Intel XTU.




    Bigger image <click here for link>

    Is there anyone here experiencing the same issue with their cpu?
  • Hello guys, any idea kung kelan magiging available ang 8th Gen Core i7 processors?
  • Kumusta Skylake users?

    :)

    Tiis lang sa upgrade itch at hintay sa 2018. Nababagalan na ako sa Core i7 7700 when encoding game play videos that are 5GB or larger
  • Holding on to my i7 6700K. No plans on upgrading anytime soon. Abang nalang siguro ng 10nm Intel chips hopefully by that time may mainstream 8c/16t na sila. lol Sa ngayon kasi hindi ko pa kailangan ng extra cores/threads.

    Ang bilis ng panahon malapit na pala mag 3 yrs old ang Skylake.

    -- edited by stealthbio on Nov 09 2017, 05:49 AM
  • ^tama ka sir parang kelan lang latest pa si skylake.
    hehehe
  • ^I built my rig in June 2016 with an i7-6700K CPU, it was highest-end 4-core desktop CPU then. I overclocked it a bit to 4.5 GHz (using a lower voltage compared to what a normally-clocked CPU on "Auto" settings receives, haha). I don't do anything CPU-intensive though aside from gaming, so it remains snappy and I have absolutely no urge to replace it with anything newer.

    Having completed my desktop rig, I'm focusing on a laptop next. I hope to get the latest Dell XPS 13 (with the 8th-generation core i7) before the year ends. :-D

    -- edited by Peorth on Nov 14 2017, 02:57 AM
  • Hello po Skylake Users!! Magpapatulong lang sana ako. Gamit ko ay i7 6700k Skylake, with SilverStone Tundra TD02-Lite Liquid Cooler. Hindi po ako nag overclock, pero ginagamit ko yung 200Mhz boost kaya naka 4.2GHz (Balanced power option)
    Normal lang po ba na ang Idle Temp ko ay 47-50 degrees? Tapos kanina nilaro ko yung Starcraft 2, pumalo nang 100 degrees yung Package Temperature ko, then bumababa sa 3.6GHz yung frequency (Throttling?).

    Pakiramdam ko po may mali sa pagkakakabit nung Liquid Cooler ko eh. Binili ko po kasi tong setup ko Feb 2016 sa PC Express, and sa mga tech lang nila ako nagpakabit. 47-50 degrees na po talaga yung idle temperature ko noon pa, kahit bagong palinis to July 2016, so tinanggap na lang ko.

    Then nagresearch po ako, mukhang 30 degrees or below lang po ata yung Idle Temp ng ibang mga skylake users, then 80 degrees pag binebenchmark (max load yun diba?)

    So ang tanong ko po, ano po ba pwede ko gawin? Ano po ba recommended nyo na liquid cooler? Saan po ba ako pwede magpacheck-up/magpaayos around the Metro? (preferably South)

    Salamat po sa tutulong!
  • Hello po Skylake Users!! Magpapatulong lang sana ako. Gamit ko ay i7 6700k Skylake, with SilverStone Tundra TD02-Lite Liquid Cooler. Hindi po ako nag overclock, pero ginagamit ko yung 200Mhz boost kaya naka 4.2GHz (Balanced power option)
    Normal lang po ba na ang Idle Temp ko ay 47-50 degrees? Tapos kanina nilaro ko yung Starcraft 2, pumalo nang 100 degrees yung Package Temperature ko, then bumababa sa 3.6GHz yung frequency (Throttling?).


    may mali ka sa installation baka di mahigpit yung retention or di mo na set sa bios yung pump speed and fan profile .
  • @gaLj

    My Skylake i7-6700K is overclocked to 4.5 GHz using a Vcore of 1.264V and it idles at around 32 C, on full load it hits around 80's. I'm using a Frostflow 240L AIO liquid cooler. I looked at reviews of the SilverStone Tundra TD02-Lite and it's a good cooler so I'm sure that the choice of cooler isn't the problem. So, like gaLj mentioned there must be a problem with the installation (thermal paste, not screwed tight enough, forgot to remove the plastic cover from the copper base of the cooler (yes, this has happened before to a TPC member!), etc.) or setup issues (pump not running at 100%, etc.).
  • So, like gaLj mentioned there must be a problem with the installation (thermal paste, not screwed tight enough, forgot to remove the plastic cover from the copper base of the cooler (yes, this has happened before to a TPC member!), etc.) or setup issues (pump not running at 100%, etc.).


    Yeah.
    Another possibility is the orientation of the cooler. Placement could affect the performance, it may be getting enough airflow to push the air out.
  • Salamat po sa mga replies nyo, I will definitely get this checked sa PC Express (ATC) bukas. Do you have other places to recommend where I can get my setup checked?
  • Then nagresearch po ako, mukhang 30 degrees or below lang po ata yung Idle Temp ng ibang mga skylake users,


    Ambient temperature will affect the temperature (idle and load) of the CPU. If the ambient temperature in your room is 30 C, it is impossible for the CPU's idle temperature to be also 30 C.

    CPU temperature will always be higher than ambient temperature unless you will use liquid nitrogen cooling.

    Idle Delta T = CPU idle temperature - ambient temperature

    Load Delta T = CPU load temperature - ambient temperature

    For idle Delta T, the best I got was about 4 C even during the time of Intel LGA 1156 CPU's

    -- edited by bintsmok on Nov 19 2017, 02:43 PM