Forum Topic

AMD Enthusiast (Anything and Everything about AMD. OT posts will be removed)

  • Post deleted #11987040
  • Anyone running TridentZ F4 3200C16D 16GTZKW on AsRock AB350 Pro 4?


  • -- edited by core2pentium4 on Jul 26 2017, 03:19 PM
  • bukas na po ba release ng ry3?
  • Ang pogi nun ASUS ROG X370 Crosshair VI Extreme. Kaso sobrang OP ng Asus ngayon dito sa pinas.

    @bladefrost with the recent bios update in x370 Taichi, I think it is safe to say na kayang kaya yung 2933 ram speed when using CL16 3200 hynix kits. BTW im using CL16 3200 RGB G.Skill kits and yung Rig ng brother-in-law ko naka CL16 3200 rin running at 2933 with Gigabyte Gaming 5 naman.
  • was able to run 2933 CL 16-18-18-18-1T on the Taichi using Trident Z 3200 C16 2*16GB.

    Memory compatibility has been easier lately. Ewan ko lang kay *ahem* *A* Sus!*

    Mas pangit RAM OC ko sa CH6 :p
  • ang pagresearch ko dyan sa mga CL15 at 16 na locally available is dual rank daw yan.... so kung na ooc na to 2933 ang mga locally available dual rank rams, wala na palang silbi na kumuha ng single rank rams....?

    mas mura pa kesa CL14

    kasi according to the mobo manufacturers, pag dual rank, hanggang 2400 lang, kakayanin siguro hanggang 2667 but nothing higher while single rank daw skie's the limit hanggang kaya ng dies mismo.... kaya ako samsung B die na single rank parati hinahanap ko....
  • Depende sa makukuha mo.

    There are single rank 16GB kits around.

    32GB will always gonna be Dual Ranks.

    TridentZ and Ripjawz V na 2*8GB will have higher chances na maging Single Rank.
  • saka lastly, may bago ako narinig na mas mabilis DAW ang dual rank laban sa single rank?

    bilis as in siguro yung processing ability nung ram stick na yun....?
  • ^yung sa amd article ba? may cons yung dual rank, afair di mo masyado mapupush yung freq.
  • Post deleted #11987674
  • I can check nung settings ko using Hynix. ;) sa CH6 nga lang muna. Can't promise but maybe tomorrow kaya kong magpost ng results.

    Single Sided Hynix na Kingston HyperX. Cheap ones.
    Can also a try nung Microns.

    As for Dual vs Sinhle Rank - may advantages yung Dual Rank sa Bandwidth. But more of neglected dahil sa Latency.
    Mas mahirap din siya sa OC dahil sa loaded ang IMC.
    Sa X99, mas okay yung Dual Rank kasi di naman masyado mataas yung clock at yung limitation is nasa platform, hindi dahil mahina IMC.

    Sa Ryzen, best bet pa rin ang Single Rank.
    Clocks btw, is one thing. Latency is another.
    Dahil sa AGESA 1.0.0.6, lumabas na yung impact ng latency over RAM clocks. But still, clocks prevail sa gaming.

    I hope these makes sense.
  • Single Sided Hynix na Kingston HyperX. Cheap ones.


    yung micron na kingston yung sa iyo di ba? ito yung napatakbo mo ng 3200?

    so for now single rank muna.... pero hahanap na rin ako ng magagandang kingston values.... katulad ni grandmaster akosimus.

    ^_^
  • G.Skill Aegis 8GB kit, hynix based single rank modules




    -- edited by sempron_guy on Jul 27 2017, 02:51 AM
  • even cheaper alternatives......
  • @sempron

    The number of HCI instances should match your thread count to load your CPU threads equally. But your set-up should be good IMO.

    @redwing

    You sir got me confused. I thought gusto mo ng high Memory OC. XD
  • @geloloco

    Nice! Worry ko lang baka nasa 2400mhz lang kaya ng G.Skill Ripjaws V Hynix sa X370 board hehe. May chance ba na mag run sya at 3200mhz at XMP timings sa Taichi?
  • @sleepygeepy

    Tingin ko yung mga G.Skill Ripjaws V and Trident Z na DDR4-3200 (2x4GB or 2x8GB) have a very good chance of running at DDR4-3200 XMP timings or DDR4-2933 with tight timings sa mga Ryzen boards ngayon. Malaking tulong talaga yung bagong AGESA sa memory compatibility.


    Based on Hynix chips yan? Yung sa akin Ripjaws V 8x2gb CL16 Hynix yata. May chance ba na mag run sya sa 3200mhz at XMP timings sa Taichi X370?
  • Guys tanong ulit.

    Pag mag overclock na ako sa Ryzen yung XFR feature nya may magiging disabled? (Ryzen 1700x)

    Meron din bang speedstep like Intel yung Ryzen? Halimbawa kung mag overclock ako to 4.0ghz tapos mag idle mode balik sya sa 3.0ghz. (Ryzen 1700)
  • You sir got me confused. I thought gusto mo ng high Memory OC. XD


    ang gusto ko syempre yung flare X, pero mahal.... 2nd mga C15 at C16 na trident Z dahil medyo malapit na ram OC sa flare X, yung kingston value ram 2133 na micron at 2400 na hynix rounds out the tail end dahil uber cheap sila.... pero less likely na mapatakbo ng mabilis....
  • The number of HCI instances should match your thread count to load your CPU threads equally. But your set-up should be good IMO.


    yeah initially yan nabasa ko na method sa ocn, number of core counts daw + (no.of cores * .5). Ngayon no. of threads na testing ko.
  • Q: may significant perf increase ba from fx8320e going to ryzen3? Or mas recommended yung ryzen 5 for the minimum?

    Thanks.
  • good day guys

    sa mga naka AMD GPU

    anybody here experienced yung nagka-cap or nalolock to lowest clock rate yung GPU?

    mine specifically eh sapphire r9 390 - ok naman siya sa games and satisfied naman ako sa 1080p@60hz for almost 2 years na
    for some reason i think i might have updated the graphics drivers and i started having stutters during gaming

    nung una kala ko sa specific na game lang na Valkyria Chronicles where I cant get past 22 fps (thinking it was a bad SEGA game PC port)

    i installed witcher 2 a month ago and i haven't played it heavily until this week
    so i just noticed na framedrops also happens on the said game

    upon further investigation HWMonitor reports na Maximum clock rate nung GPU is 300mhz
    and i checked MSI afterburner's graphs, 300mhz nga rin lang yung max niya
    kahit nakaset na default eh 1040mhz gpu clock, 1500mhz memory clock

    i've read on other forums and Im about to test downgrading to an older driver para lang dito sa issues na to

    although hopefully may makapag bigay din ng inputs from here

    TIA
  • Nag upgarde ka ba sa 17.7.2?
  • ^ yes sir
    ang kulit kasi nung notification so inupdate ko i think last 2 weeks ago
  • Kanina lang ni release un paps. Baka ibang version yan. Dbl check mo tapos downgrade m na lang cguro
  • mine specifically eh sapphire r9 390


    Downgrade mo muna sa Crimson. Halos sabaw yung performance ng ReLive simula ng lumabas.

    Oo nga pala, hindi lang ikaw yung me problema tungkol sa bagong driver:

    https://www.reddit.com/r/Amd/comments/6prw42/crimson_1772_feedback/

    -- edited by PyroclasticFlo on Jul 27 2017, 12:27 PM
  • oh i think mine is at 17.4.4 if i remember correctly

    sabi din dun sa amd community threads the bug started appearing nung inintroduce yung radeon wattman

    i'll go back to 16.11.4 for the time being (which is what i used previously for the past year)
    wala naman akong ganitong problems that time

    natanong ko lang din dito sa tpc to confirm if meron din naka experience hehe
  • undervolt ko yung rx 480 ko, noong december very stable naman @1.1v with the newly released crimson relive driver. pero as many driver updates rolled in nagiging unstable na graphics card with the undervolt hanggang naging stock voltage na rin.

    -- edited by adcua on Jul 27 2017, 12:53 PM

    -- edited by adcua on Jul 27 2017, 01:04 PM
  • question mga master sa GPU, kapag nk-17.4.4 kana need mo idowngrade or iupdate to 17.7.2 ??

    -- edited by boyangaZ on Jul 27 2017, 03:08 PM