AMD Enthusiast (Anything and Everything about AMD. OT posts will be removed)

• Post deleted #12019570

• geoff114 on 20 Sep 17 @ 09:16 PM #

  @sleepygeepy
  Thanks, meron palang budget cooler ang Noctua. Mukang mini NH-D15 nga hehe :-)
  
  I'm leaning towards Cryorig H7 quad lumi. Aesthetics is a big plus too, one of the best looking, tower-type RGB cooler :-)
  
  @wcarr0305
  Nice OC's! :-)
  
  -- edited by geoff114 on Sep 21 2017, 03:10 AM
• Post deleted #12020510

• eklabu on 21 Sep 17 @ 06:20 PM #

  Pa help naman mga sir,
  Nakakaranas kasi ako ng BSOD ngayon everytime na mag reboot pc ko, pag unang bukas ok pero after mga 1-2mins nag BSOD na. Di ako makapag stress test gawa nga don, di ko malaman kung ano may prob yung ryzen 3 ba or yung ram ko na ripjaw 5 2x4gb 2400. Ni reboot ko na ng paulit ulit sa default settings pero ganun paden. Then inaseemble ko ulit yung rig ko para macheck kung naka connect ba sila ng maigi and yun ok naman pero BSOD paden. Pano kaya to? Possible kaya sa unstable overclock ko to then na-abuse ko na yung rig ko? Naiisip ko baka nasira ko na dahil sa kaka tweak ng overclocking, wag naman sana -_-

• sempron_guy on 21 Sep 17 @ 06:49 PM #

  reset bios settings to optimized defaults? yan ba ginawa mo?

• eklabu on 21 Sep 17 @ 07:13 PM #

  ^yes sir ganyan nga, actually nag degrade ako ng bios ngayon from 3.20 to 3.0. Pero ganun paden BSOD paren.

• sempron_guy on 21 Sep 17 @ 08:13 PM #

  ano yung nilabas na error code sa bsod?

• eklabu on 21 Sep 17 @ 08:52 PM #

  ^
  Ok na pala sir maraming salamat sa concerns, i appriciate it. Virus pala yung problema ,galing dun sa dinadownload ko sa torrent. Nung nagfullscan ako sa safemode dun ko lang nalaman, kaya binura ko and ayun naayos naman. Akala ko sa hardware ko na eh, ganun kasi nangyayari pag hindi stable OC diba. Hehe sorry sa abala ,nag-panic agad ako eh.
• Post deleted #12021041

• schimiro on 22 Sep 17 @ 11:46 PM #

  hello to everyone...anyone here na nakapag try na ng nh d15 sa cm690??kakasya kaya???hehehe
  
  thanks po sa sasagot :)

• oonaakona on 23 Sep 17 @ 01:07 AM #

  Tried Overclocking my 1700 to at least 3.7Ghz kaso pag dating ko ng desktop, stock clocks pa din ang lumalabas. Same din sa ram, from 2400, 2666 or 2933, stock clocks pa din pag dating ng desktop. Wala pa ko ginagalaw sa mga voltages, lahat multiplier and xmp lang mga nakalikot ko so far. May kulang pa sa ginalaw ko? Hehe
  
  UPDATE 1: Uninstalled Ryzen Master and nakapag save na ko ng OC settings. RAM muna sinubukan ko. Paunti unti, bumped 2400Mhz to 2666. Stock DRAM Voltage. Success. No errors.
  
  UPDATE 2: Tried bumping the RAM to 2933. Stock voltage. Failed. Failsafe activated and booted back to stock RAM settings. Increased DRAM voltage to 1.3v at least. Ayaw pa din. Failsafe activated. Did not touch the SoC or any other voltages aside sa DRAM.
  
  Antay na lang muna ako ng tips nyo bago ko kumalikot ulit. Hehe. For now balik stock lahat. CPU di ko muna ginalaw hanggat di ko pa nahahanap yung stable settings maliban sa 2666.
  
  -- edited by oonaakona on Sep 23 2017, 02:28 AM
• Post deleted #12021748

• oonaakona on 23 Sep 17 @ 02:48 AM #

  @sleepygeepy
  
  Sa BIOS. Tried asking as well sa AMD Ryzen FB Groups, nag failsafe daw yung akin kaya bumabalik sa dati. So what I did was, RAM na lang muna inisa isa ko.
  
  -2666 @ stock voltage = success
  -2933 @ stock voltage = failed.
  -2933 @ 1.3v = failed (nag stop na ko dito)
  
  Tired 2666 @ stock ulit just to make sure, okay naman. Booted with no errors or whatsover.
  
  Also, unistalled AMD Ryzen Master App since may nag suggest din kasi na minsan nag ca-cause din ito ng errors when OC. So I removed it muna.
• Post deleted #12021751

• oonaakona on 23 Sep 17 @ 02:56 AM #

  ^Check ko ngayon kung naka enable ang geardown. Kung tama pagkaka tanda ko, naka enable sya. BRB. Hehe.

• oonaakona on 23 Sep 17 @ 02:58 AM #

  Naka Auto pala ang geardown ko. Will try to enable it then set it to 2933 with 1.35v.

• oonaakona on 23 Sep 17 @ 03:03 AM #

  2933 @ 1.35v / Gear Down Enabled = Failsafe. Back to stock ulit. Di kaya malas talo ako sa silicon lottery sa mobo? Hehe
• Post deleted #12021756

• oonaakona on 23 Sep 17 @ 03:13 AM #

  Probably yung board ko din siguro ang may limitations. Yung kay phil82, swerte at maganda na-achieve nya on stock settings pa. Sa akin, pa unti unti ayaw pa. Hehe. For now, balik stock muna lahat and wait till AMD releases a good board similar to what I have used for Intel (Asus RoG Swift Z270G).
• Post deleted #12021758

• oonaakona on 23 Sep 17 @ 03:25 AM #

  ^Aralin ko muna yung timings then I'll try to tinker it with the settings I applied kanina. Kung di lang problem space dito sa amin, baka nag ATX na lang ako ulit para mas madami choices for good Mobos. Hehe.

• palo on 23 Sep 17 @ 02:52 PM #

  Finally!
  G.Skill Releases AMD-Compatible Trident Z RGB Kits
  <click here for link>

• theDUD3 on 23 Sep 17 @ 04:17 PM #

  ^ My G.Skill Trident Z RGB 3200 runs fine @ 2933Mhz.

• macadamiadark on 23 Sep 17 @ 06:16 PM #

  Mga sir, tanong ko lang sa mga naka ryzen na..mag ryzen 3 lang sana ako at mini itx build gawin ko..para din ba itong kaveri apu na pwede mo iset ang tdp kung 45 or 65 watts? Mag skylake i3 sana ako kaso advice sa akin wala nang upgrade na magagawa ako kaya mag ryzen na lang ako..kung bumili ako ng mobo na am4 magagamit ko din yung darating na ryzen apu di ba? kung mag ryzen 3 muna ako kailangan pa ng gpu diba?

• schimiro on 23 Sep 17 @ 08:33 PM #

  hello po...good eve...help lang po
  
  nag iinstall kasi ako ng win 7 64bit yung unang screen before mag check agreement indi gumagana yung keyboard/mouse(usb 2.0)...
  
  tried googlig about it, enable daw yung usb legacy..di ko naman makita sa bios...other solution is gunamit daw ng ps2 na mouse/keyboard, kaso wala naman ako ganto or mahiraman..hehehe
  
  baka po may other solutions pa kayong alam,pashare naman po...hehehe
  
  btw yung unit ko is r5 1600, asrock x370 fatality gaming x, gskill 2400 c15 gvr...
  
  thanks po in advance :)
• Post deleted #12022084
• Post deleted #12022092

• schimiro on 23 Sep 17 @ 09:09 PM #

  thank you po ulit sir sleepygeepy...sana gumana na sya...hehehe :)

• macadamiadark on 23 Sep 17 @ 09:19 PM #

  Thanks sir sleepy, naka a6 7400k kasi ako tas naka gtx 750..naisip ko lang din mag upgrade to kaveri or skylake kasi pareho naman sila gagamit ng ddr4.. stick na muna ako sa gtx 750 tas upgrade na lang din sa ryzen next month..salamat ulit sir.. nabasa ko yung raven ridge apu na parang kaveri din ata ang performance..

• sempron_guy on 23 Sep 17 @ 10:40 PM #

  @oonaakona
  
  tsaka na timings and any non-freq related settings pag makuha mo na max oc sa frequency. Increase voltage for either dram or soc. For dram 1.5v below is safe. SOC not more than 1.15v
  
  -- edited by sempron_guy on Sep 23 2017, 10:41 PM