Forum Topic

AMD Enthusiast (Anything and Everything about AMD. OT posts will be removed)

  • ^
    As a QHD user with 6600XT with 5500\5600

    yes its ok for most games BUT dont expect it to get you high FPS unless you use RSR on higher settings.

    I only need 95Hz for my monitor but newer games will still be easy to run

    -- edited by Noir on Jan 26 2023, 01:32 AM
  • @Deicidium

    noted mga sir. Mukhang eto nalang kunin ko na cpu. Problem ko nalang is kung swak lang yung 6600 na gpu sa 1440p monitor?


    Depends on the game and settings, miske 5600XT ko pumapalo parin sa 1440p kaya hindi ko parin pinapalitan. Settings dito ay mostly high/ultra na naka FSR 1.0


  • fakuryu
    @Deicidium

    noted mga sir. Mukhang eto nalang kunin ko na cpu. Problem ko nalang is kung swak lang yung 6600 na gpu sa 1440p monitor?



    Depends on the game and settings, miske 5600XT ko pumapalo parin sa 1440p kaya hindi ko parin pinapalitan.


    bossing yun ngang pre pandemic build mo sa akin 3700X + 5700 combo solved pa rin ako @ 1440 sa mga games ko :)
  • bossing yun ngang pre pandemic build mo sa akin 3700X + 5700 combo solved pa rin ako @ 1440 sa mga games ko :)


    Great to know sir, may asim pa yan sa 1440p unless na naka RTX3090ti levels ng GPU ka hehe

  • Ang daming Red Devil XTX ngayon sa Am@z0n. Baka maka score din kayo.
  • halata ba un pag ka downgrade ng quality pag naka fsr?
  • Mostly depends on implimentation BUT for most games its not noticeable ONCE you are moving

    If you stare at still pictures or in a lobby page then yes its noticeable
  • halata ba un pag ka downgrade ng quality pag naka fsr?


    Hindi ko mapansin sa Warzone 2.0 at RE:3
  • hello mga sir...

    question lang baka alam nyo solution, im using win11 and yung gpu driver palagi nag uuninstall.
    natry ko na yung hide/show windows update from ms pero eto ulit bigla nawala nanaman yung driver.

    6700xt pala yung gpu and 22.11.2 driver


    thanks in advance :)
  • @schimiro

    Download mo yung driver na pang Windows 11, baka pang Windows 10 gamit mo. Pag ayaw try mo mag DDU muna.
  • ^ pang win11 naman sir yung dinadownload ko...

    natry ko narin ddu sa safe mode, then install ng driver after restart. na dedetect pa yung driver after restart pagka install nf driver.

    pero kapag shinutdown and start ng pc, pagka boot di nanaman madetect yung driver.
  • @schimiro

    Yikes, pag ganyan nag rereformat na ako.
  • ^ iniisip ko nga sir balik win10 nalang...hehehe
  • I have been using WIn 11 since its release, wala ako ganyan issue.

    Also have it in my work PC and personals laptops. Different GPUS and dont have that issue
  • Anyone with good PBO2 Tuner settings for 5800x3d? Cooled by Noctua NH-D14.

    Thanks

    -- edited by mapl on Jan 27 2023, 07:34 PM
  • Dumating na yung DDR5 RAM na nabili ko from Am%zon warehouse. Used - Acceptable condition. May damage sa packaging pero yung RAM itself is almost flawless. Tipid na sya for 4k pesos free shipping pa so if you're looking for cheap DDR5 RAMs try nyo lang din siguro abangan. Mabilis lang din shipping recently. Yun lang haven't tested it yet as di pa dumadating yung board ko (also used/second hand). Hoping this works as more than 3x yung price dito satin sa Pinas pag brand new. Currently its 9k naman pag brand new sa am%zon.




    Update sa Reference Model na 7900XTX na nabili ko, natest ko na sya. Its working great, wala namang overheating issues. My Idle board power on current driver is around 55-60w, possible driver issue kaya?

    -- edited by Advali on Jan 27 2023, 10:27 PM
  • Anyone with good PBO2 Tuner settings for 5800x3d? Cooled by Noctua NH-D14.

    Thanks


    @mapl

    Nakabili ka na ng 5800x3D? How much damage?
    From what I could remember parang nakalock ata PBO nito depending on the board/bios?
  • @Advali

    19800 , B#rm0r

    Pwede sa PBO2 Tuner, mag undervolt ka.
  • yung rx 6600 ba kaya ng ray tracing or pang pure rasterization lang talaga sya? malag kasi pag naka on un ray tracing e
  • ^

    Hapdi talaga ng performance loss ng raytracing, kahit sa higher end gpus
  • @GENTLEMAN

    pero sa pure gaming kaya nya tapatan ang rtx 3060
  • Yan ung di ko sure. Check mo ung mga reviews and benchmarks (wag lang userbenchmark, kamote yan)
  • Ok, sad day sad life.

    Stressed test my 7900xtx reference again and unfortunately, may issue yung cooler and sa RDR2 na benchmark pa sya lumabas (was initially testing with Timespy Extreme and Port Royal ng ilang loops). 55c GPU temp while 105c sa Junction. Sa gaming di ko actually napansin since playing Yakuza 3 asa 47c lang yung junction and 60c while playing Phasmaphobia. Actually oks sya iundervolt sa 1080mv @3GHz with power and vram tuning disabled so nakakahinayang din talaga.

    Unfortunately si kango, walang option for returns but I have 2 options:

    1. Return it sa US via UPS (117usd yung estimate) -- mabilis lang din shipping.
    2. Just buy a waterblock which I was planning naman talaga -- ang problem dito wala pang waterblock sila bykski or barrow

    Lesson learned, sinabi na kasi wag bumii ng reference :( Plus risk din talaga ng buying abroad which I chose to YOLO.
    So mejo kinakabahan sa iba pang used parts na binili ko abroad na di ko pa natetest (RAM/Board/Proc) hahahahaha. First time na minalas ako sa GPU, mahal pa.

    F.

    -- edited by Advali on Jan 29 2023, 07:44 PM
  • Ouch. Kaya ako pag bumibili sa famous river mga di sirain like procie at ram.

    Pero this last black friday palakasan ng loob bumili ng nvme at harddisk malaki difference vs sa mga shops dito.
  • @Advali

    Malas lang talaga ung reference model. Sakin naman (AIB) nagiinarte at certain settings.

    Uhaw masyado ung XTX umaabot almost 500w ung power spikes haha
  • Well still leaning na ituloy ko na lang din yung pag custom loop nito. I asked UPS kanina and mukhang estimate is baka umabot ng 173usd to send it back ugh. Well its still usable though, I can game on it pero depends on the game, problem is mahihirapan lang ako ibenta to next time. Well I have to be honest na it was still my fault to go YOLO on purchasing it tapos nakakahinayang na after a week, lumabas yung AIB variants.

    Still kabado dun sa board/proc/ram side haaaaaay.... Will update na lang if its works.

    @Advali

    Malas lang talaga ung reference model. Sakin naman (AIB) nagiinarte at certain settings.

    Uhaw masyado ung XTX umaabot almost 500w ung power spikes haha


    Baka possible quirk lang sa driver or something? Nakikita mo ba sya dun sa onscreen display and live graphs?

    On mine while I was stress testing sa 3Dmark upto 345-355w lang yung usual na max (or baka dahil throttling na yung sakin? or another effect sakin nung cooling issue?) and I get around 15k points undervolted.

    Ouch. Kaya ako pag bumibili sa famous river mga di sirain like procie at ram.

    Pero this last black friday palakasan ng loob bumili ng nvme at harddisk malaki difference vs sa mga shops dito.


    Nakakatempt kasi talaga pag mura hahahaha. Especially for the board and RAM kasi overpriced yung pricing nila. Yung nakuha ko na $279 for both kahit "used - acceptable" is a steal na talaga for me.

    But yun nga, for now, iyak na lang muna ako :(

    -- edited by Advali on Jan 29 2023, 10:14 PM
  • @Advali

    Nakaopen ung gpu-z and afterburner OSD. Kita nga ung 400w+ spikes (in game) pero saglitan lang. Uhaw masyado haha

    Sa 3dmark timespy naman, from 30-31k ung gpu score. Parang bottlenecked ng ryzen 5000. Di naman lumalagpas ng 80c hotspot ung gpu eh.

    Ung pansin ko lang (dual monitor setup), paminsan minsan may mga artifacts sa 2ndary monitor (parang glitch na linya). Di naman ganun sa prior gpu ko (6900XT). Hopefully bug lang ng driver kasi nakita ko meron din sa ibang forums.
  • anyone tried the modded AMD driver by Amernime?
  • ^ i also saw that video and wanted to try on my RX550 but i only play witcher 3 and fall guys currently on that card
  • Just got a 6700xt for a good price from P**lk0r, anong amd driver version ba ok gamitin dito?