Forum Topic

The Coolers Thread: CPUs / GPUs / HSFs / Fans: New Products and Reviews

  • may gising pa ba? pano ba mafifix yung cpu fan error? lagi ko need mag enter ng bios kasi eh, nagpalit kasi ako ng id cooling 240 frostflow.
    asus z170 pro gaming mobo.

    -- edited by JWynter on Apr 25 2016, 03:41 AM
  • ^
    hindi naka plug yung cpu fan mo sa mobo check mo
  • naka plug sir
  • ^
    yung power?hindi madetect ng mobo yung cpu fan kaya ganyan yan e...check mo lang lahat ng connectors
  • naka connect ng maayos sir as stated above. common issue to sa asus boards e.
  • ^ Yung pump sa CPU fan header dapat naka kabit. Yung fans sa CHASSIS fan header. Na double check niyo sa manual sir?

    or try this according to the FAQ:
    <click here for link>
  • @sleepygeepy @bluedude44 @tongerks thanks sa reply, chineck ko yung Swiftech H240x, based sa mga review at build nung mga meron nyan, maganda sya kasi expandable sya, tapos yun nga, for maintenance, pwedeng ikaw na mag drain/fill nung coolant, research pa ako konti, pero parang eto na gusto ko, tska in the future pag natripan ko iwatercool din yung GPU, pwede na din akong bumili ng GPU block tapos ikabit dun sa H240x.
  • ^ Yung AIO na closed-loop liquid coolers like Corsair H60 no maintenance siya. Ang tingin ko dun is by the time na magkaron siya ng problems (~3-5 years) nagpalit / magpapalit na ako ng cooler. Then again, computer hobbyist ako kaya medyo madalas din magpalit ng parts.
  • https://imgur.com/a/282K4

    Eto trip kong setup, but siguro for now, hindi ko muna imomodifiy bka next year na lang yung sa GPU block, mga 50-55k lang budget ko sa next build ko e. kaya x61 yung trip ko dati kasi yun yung parang top of the line closed-loop AIO cooler, pero bka mag H240X na lang ako, siguro madali lang naman i modify yung ganong setup.
  • @mcace14
    chineck ko yung Swiftech H240x, based sa mga review at build nung mga meron nyan, maganda sya kasi expandable sya, tapos yun nga, for maintenance, pwedeng ikaw na mag drain/fill nung coolant, research pa ako konti, pero parang eto na gusto ko, tska in the future pag natripan ko iwatercool din yung GPU, pwede na din akong bumili ng GPU block tapos ikabit dun sa H240x.

    Swiftech H240X is a good choice sir :-)

    Consider mo din yung H220X since gumagamit siya ng 120mm fans. Reason behind this is kung plan mo mag upgrade ng fans mas madaming fan choices sa 120mm size. Mas readily available kasi sa atin mga high performance 120mm fans like Scythe GT AP-15 and EKWB Vardar fans. Yung mga high static pressure 140mm fans bihira lang and you have to order them abroad most likely.

    Also kung plan mo magpalit ng case, mas compatible ang 220mm radiators and less likely ka magkaka-issue mounting the radiator on the top panel (and hitting the motherboard or memory slots).

    Maganda din ang Fractal Design Kelvin dahil yung OEM niya is Alphacool and gumagamit din siya ng brass radiator (para anti-galvanic corrosion)
  • Post deleted #11650149
  • ^Ano ba motherboard mo? Kung pci-e naman mobo mo gagana yan.

    Kaso medyo off-topic sa 'coolers thread' question mo.

    -- edited by bluedude44 on Apr 25 2016, 07:44 PM
  • ay sorry kung wrong section delete ko nalang.. btw tnx sa reply
  • tanong lang

    ok lang po ba ikabit yun pump ng AIO sa 3 pin chassis fan header planning to buy G10 kasi, mapapatakbo ba ng maayos yun pump kung doon naka plug un pump ng AIO?

    -- edited by JLsantiago on Apr 26 2016, 03:42 PM
  • ^
    Baka may chance na hindi kayanin ang pump or hindi tatakbo ang pump at full rpm. Alam ko kasi mas malakas ang power draw ng AIO watercooler pumps (compared to a case fan) so dapat yung motherboard header mas malakas ang amperage rating in order to power a pump properly.

    Pero hindi ba ang AIO watercooler pump pwede mo naman i-power directly from a PSU molex or SATA connector, then may 3-pin header na ikakabit mo sa motherboard? So yung PSU is providing power to the pump while yung motherboard is monitoring and controlling RPM / pump speed?
  • @JLsantiago

    Nasubukan ko na Corsair H60 ko patakbuhin pump sa chassis fan header wala namang difference sa cpu fan header. Make sure mo lang na running at full speed yang pump. 3pin lang naman din ata yung mga AIO pump connector.

    ^or power mo na lang din directly from PSU via adapter.
  • ok ok thanks try ko nalang muna siguro kapag ayos yun 3 pin kapag hindi sa PSU nalang gamit nalang ng adapter thanks.
  • mga sirs, meron po ba ditong may experience mag kabit ng NZXT Kraken G10 para sa non-reference GTX 980 ti? meron akong kakakuha lang na Gigabyte GTX 980 TI xtreme gaming. mahina ata ang google-fu ko at hinde ako makahanap ng guide kung compatible sya. kung hinde, ang option ko sana eh kumuha ng swiftech H240-X tapos EKWB for 980 ti(pero hinde ko rin sure kung compatible sa GPU ko.

    walang forums ang gigabyte :( at panay G1 gaming versions or reference cards ang nahahanap ko.

    maraming salamat!
  • From: <click here for link>

    ENTER A PRODUCT NAME BELOW TO CHECK COMPABILITY WITH THE:
    “KRAKEN G10 - WHITE”

    Gigabyte GeForce GTX 980 Ti 6GB XTREME GAMING Video Card
    OOPS! The NZXT G10 Video Card Cooler and Gigabyte GeForce GTX 980 Ti 6GB XTREME GAMING Video Card are not compatible.
  • mga sirs, meron po ba ditong may experience mag kabit ng NZXT Kraken G10 para sa non-reference GTX 980 ti? meron akong kakakuha lang na Gigabyte GTX 980 TI xtreme gaming. mahina ata ang google-fu ko at hinde ako makahanap ng guide kung compatible sya. kung hinde, ang option ko sana eh kumuha ng swiftech H240-X tapos EKWB for 980 ti(pero hinde ko rin sure kung compatible sa GPU ko.

    walang forums ang gigabyte :( at panay G1 gaming versions or reference cards ang nahahanap ko.

    maraming salamat!


    sayang lang yang cooler ng xtreme gaming kung gagamit ka ng aio. maganda naman yung performance ng xtreme gaming sa cooling.
  • sayang nga yan dapat nag reference nalang siya or non reference na mura lang hehee
  • @bluedude, salamat sir! meron palang ganyan.
    @luckael, napadaan kasi ako sa exhaust fan nung casing ko. medjo mainit yung buga ng hangin. parang kinukulang sa paglabas ng mainit na hangin.
    @JLsantiago, oonga po eh. nung namimili kasi ako nagfocus ako sa performace. nawala sa isip ko yung mga aftermarket na pwede kong ikabit.

    salamat po ulit mga sirs!

    mas mainam po ba na yung corsair H110i GT eh ilagay ko sa front. tapos gawij kong push pull para sa hangin. tapos yung top gawin ko exhaust?

    naka corsair air 540 kasi ako.
    1 140mm ang vent sa likod.
    2 140mm intake sa front.
    tapos yujg corsair H110i GT sa top.

    yung vent sa liko medjo mainit yung buga ng hangin.

    iniisip kong gawing;

    140 mm sa likod vent.
    2 140mm sa top gawing vent
    H110i GT push pull set up sa front. para sana mas lumamig.


    or;
    butasin ko yung ilalim na pinaglalagyan ng 2 HHD hot swap para lagyan ng 2 140mm.

    ano po sa palagay nyo mga sir ang mas mainam?

    salamat po ulit
  • @icon27

    mas mainam po ba na yung corsair H110i GT eh ilagay ko sa front. tapos gawij kong push pull para sa hangin. tapos yung top gawin ko exhaust?

    naka corsair air 540 kasi ako.
    1 140mm ang vent sa likod.
    2 140mm intake sa front.
    tapos yujg corsair H110i GT sa top.

    yung vent sa liko medjo mainit yung buga ng hangin.

    iniisip kong gawing;

    140 mm sa likod vent.
    2 140mm sa top gawing vent
    H110i GT push pull set up sa front. para sana mas lumamig.



    mas ok pa yung case mo vs sa case ko :). naka 980 ti extreme gaming din ako with Phanteks Evolv case 1x120mm lang gamit kong exhaust

    mas ok kung ganito ang gawin mo ilipat mo sa top yung h110i gt.

    Front = Intake
    Top = H100gt Exhaust pull
    Rear = exhaust
  • mga master, tanong ko lang po kung meron naka COOLER MASTER V8 GTS dito?

    Any feedback po sa performance?

    Compatible po kaya it sa Fatal1ty Z97 killer na MOBO?

    san po kaya ito pede mabiili?
  • mga master, tanong ko lang po kung meron naka COOLER MASTER V8 GTS dito?

    Any feedback po sa performance?

    Compatible po kaya it sa Fatal1ty Z97 killer na MOBO?

    san po kaya ito pede mabiili?


    naghahanap din ako nyan dati eh, sinearch ko na lahat ng online shop sa pinas, sa lazada lang ako may nakita. and about dun sa compatability issue, sa case ka medyo mamromroblema sir, masyado kasing mataas yang cooler na yan
  • nasa fb page ng *cwo*x yung v8gts... 4,499
  • Guys need suggestion on what Fan to buy.. i got a techware carbon case,sapphire r9 390(i really dont know why i put this maybe this should be consider in choosing) and a hyper 212x cpu cooler. Thanks
  • @MasterRaceEm
    Guys need suggestion on what Fan to buy.. i got a techware carbon case,sapphire r9 390(i really dont know why i put this maybe this should be consider in choosing) and a hyper 212x cpu cooler. Thanks

    Admittedly medyo anemic yung front 200mm fan ng Tecware Carbon case (got one for my brother). I suggest you look for a more powerful 200mm fan para mas malakas ang intake airflow.

    Si suki meron on-sale na Cooler Master MegaFlow 200mm fan for only Php 200 which I'm also thinking of getting pag napadaan sa Gilmore. Meron din NZXT FS-200RB fan for Php 350 pero mas mahina ang CFM rating compared to the Cooler Master MegaFlow.

    Also install a decent 120mm exhaust fan at the rear panel to help remove hot air inside the case. Pwede ka din maglagay ng exhaust fans sa top panel but I think overkill na and will change your case to negative air pressure (most likely).
  • Ang tindi nitong hsf. :)


  • Admittedly medyo anemic yung front 200mm fan ng Tecware Carbon case (got one for my brother). I suggest you look for a more powerful 200mm fan para mas malakas ang intake airflow.

    Si suki meron on-sale na Cooler Master MegaFlow 200mm fan for only Php 200 which I'm also thinking of getting pag napadaan sa Gilmore. Meron din NZXT FS-200RB fan for Php 350 pero mas mahina ang CFM rating compared to the Cooler Master MegaFlow.

    Also install a decent 120mm exhaust fan at the rear panel to help remove hot air inside the case. Pwede ka din maglagay ng exhaust fans sa top panel but I think overkill na and will change your case to negative air pressure (most likely).


    i was thinking on getting 2 120mm AF120 and replace the weak 140mm later i hope that will be enough thanks for the suggestion