-
silentorange19
on
18 Oct 16 @ 12:10 AM #
mas ok padin si IS-50
-
fakuryu
on
18 Oct 16 @ 12:15 AM #
@Espadahan
Ayos po ba ang Cryorig m9i pamalit sa intel stock cooler? or hindi din ramdam? i5 4590 processor ko.
It should be vastly superior sa stock Intel cooler.
http://www.tweaktown.com/reviews/7426/cryorig-m9i-cpu-cooler-review/index6.html
-
Espadahan
on
18 Oct 16 @ 12:26 AM #
@fakuryu
salamat sa info. pag pilian ko nalang kung m9 o IS 50
-
sydmon
on
18 Oct 16 @ 12:58 AM #
Hi guys. Is the below a good custom fan curve? Hanggang 4 points lang pwede sa mobo ko eh.
40C = 50%
50C = 70%
60C = 85%
70C = 100%
Also, yung sa HSF ba dapat naka custom fan curve din or dapat 100% lagi yun?
up lang po question ko
-
Espadahan
on
20 Oct 16 @ 02:50 PM #
mga bossing ask ko lang kung mas okay ang id cooling se 214x kesa id cooling is 50 halos same price lang kasi sila
-
skylink_charles
on
20 Oct 16 @ 03:32 PM #
Ayos po ba ang Cryorig m9i pamalit sa intel stock cooler? or hindi din ramdam? i5 4590 processor ko.
Thanks.
I'm using m9i sa g3258 ko. OC at 4.3ghz 75 max temps ko at load 1.25v.
Planning to go H110i. malayo kaya ito sa m9i?
-
Dyaems
on
20 Oct 16 @ 03:51 PM #
sydmon
Too bad it came out just recently, Hyper 212x tuloy ang nabili ko 2 months ago.
yun lang sayang hehe. but deepcool lucifer is still superior than hyper212x at the same price, and also available locally. only downside is that it is huge xD
- Post deleted #11790799
-
fakuryu
on
21 Oct 16 @ 10:06 PM #
@skylink_charles
I'm using m9i sa g3258 ko. OC at 4.3ghz 75 max temps ko at load 1.25v.
Planning to go H110i. malayo kaya ito sa m9i?
Just get an i3-4170 nalang, even if you don't OC it, mas malakas parin sya sa G3258 na OC'd
http://www.anandtech.com/show/8232/overclockable-pentium-anniversary-edition-review-the-intel-pentium-g3258-ae/4
http://www.tomshardware.co.uk/pentium-g3258-overclocking-performance,review-32974-5.html
-
Aprime
on
24 Oct 16 @ 06:37 PM #
sir ano po maganda cooler or DIY cooler for R280x? thanks po sa tulong.
-
vanillasky06
on
25 Oct 16 @ 11:11 PM #
Mga sir ano pong bang magandang VGA COOLER for sapphire 6790 vga? Plan ko sana bumili kaso di ko kasi alam kung ano yung fit n mount s screw baka MASAYANG lng bili ko.
Thanks in advance.
-
silentorange19
on
26 Oct 16 @ 12:04 AM #
vanillasky06
Deepcool Dracula Support HD6970 iisa lang naman ang dimension ng mounting hole lahat ng HD6970
-
Gobi
on
31 Oct 16 @ 09:24 PM #
guys question sa deepcool gammaxx 300... pwede bang palitin yung fan nun ng ibang 120mm?
- Post deleted #11796862
-
silentorange19
on
01 Nov 16 @ 12:33 AM #
Gobi
kung titignan mo non standard 120MM yan malamang 92MM ang mounting hole na gamit nyan duo to cone shape ng shourd
-
pcjeiem
on
01 Nov 16 @ 07:19 PM #
may 80mm bang cpu liquid cooler??
-
convin
on
03 Nov 16 @ 02:30 PM #
Sino po dito gumagamit ng ID Cooling IS-50? Ok ba sya replacement for stock cooler? my procie is i5-6600 (non-K). Thanks!
- Post deleted #11798939
-
pcjeiem
on
03 Nov 16 @ 08:30 PM #
may white led 80mm case fan ba?? need ko din ng hsf sa g3258 pang overclock.
-
sh0ckwAv3
on
03 Nov 16 @ 09:40 PM #
Sino po dito gumagamit ng ID Cooling IS-50? Ok ba sya replacement for stock cooler? my procie is i5-6600 (non-K). Thanks!
Kung kaya stretch ng budget go for SE-214X. Brought my i5-4590 load temps from 68-71c to 51-55c.
-
kimcarl0s
on
04 Nov 16 @ 02:57 PM #
Patulong naman mga sir anong maayos na fan controller na di mahal. Ang ingay kasi ng ID-COOLING PL-12025.
Salamat ng marami
-
silentorange19
on
04 Nov 16 @ 11:20 PM #
kimcarl0s
Deepcool rockman pwm or ikabit mo nalang 3 pin header ng motherboard mo yang fan
-
kimcarl0s
on
07 Nov 16 @ 11:33 AM #
@silentorange19
ung 3 pin ba ung adapter na kasama nung fan? di ko pa na ttry gamitin un, ang nabasa ko lang pinapababa nun ung voltage ng fan, so mababawasan ung ingay pag ginamit ko un?
-
silentorange19
on
07 Nov 16 @ 12:28 PM #
kimcarl0s
not sure kung low noise adapter yung include kapain mo yung sleeve ng wire kung meron matigas sa loob (Resistor)
- Post deleted #11803445
-
icommendyou
on
09 Nov 16 @ 01:43 PM #
Sino po dito users ng Be Quiet Shadow Rock LP? May ask lang ako mga bro. Ang hirap kasi i screw nung dalawang last screw. Kapag naka lock na ung sa kanan, ung kaliwa naman naka angat. Pag ung kaliwa naka screw ung kanan naman naka angat. Ayaw nila mag pantay.
Di ko kasi pde i vertical position ung screw, tumatama dun sa Power Supply. Baka dumugo pag pinwersa. Hehe
TIA sa tutulong :)
-
melfice18
on
11 Nov 16 @ 11:58 AM #
Mga sir.
what do you think about Corsair fans ML series.. yung magnetic levitation nya ba is for marketing stragtegy lang? gusto ko malaman if worth it sa sya sa price nya..
-
MrBungle
on
11 Nov 16 @ 12:27 PM #
what do you think about Corsair fans ML series.. yung magnetic levitation nya ba is for marketing stragtegy lang? gusto ko malaman if worth it sa sya sa price nya..
Of you don't mind the noise, yung mga Corsair ML fans, may wide RPM range as per specs at as long as naka PWM.
-
Dokgodie
on
11 Nov 16 @ 12:33 PM #
currently using sir :) 2 intake and 1 exhaust
worth it and eto ung prime95 ko na small ffts test
-
melfice18
on
11 Nov 16 @ 02:48 PM #
Meron kasi akong ID cooling FrostFlow 240L. medyo irritated ako sa Fan noise nung included Fans nya.. kahit man lang sana mabawasan ng konti kaya gusto ko siya palitan.
eto spec nung included fan.
Air Flow: 84.5CFM
Fan Speed: 800?2000RPM
Max. Static Pressure: 3.2mmH2O
Noise: 20?38.2dB(A)
eto naman sa Corsair ML
Airflow: 12 - 75 CFM
Fan Speed: 400 - 2400 RPM
Static Pressure: 0.2 - 4.2 mmH20
Sound Level: 16 - 37 dBA
I'm noob to this.. when it comes to rad. diba dapat ang tinitignan is the Static pressure.. since mas kailangan mo ng mas malakas na SP para maka pass through yung hanging sa Radiator.
so kung i cocompare natin yung dalawa sa taas.. mas ok si Corsair ML.?
ano po ang gamit nyo pang control ng PWM fan nyo?
-- edited by melfice18 on Nov 11 2016, 02:53 PM
