ano difference ng gammaxx gt sa gammaxx gte?
As far as I know, may RGB lights ang top plate and may included na RGB LED controller. Other than those two same lang ang spes and features.
Forum Topic
The Coolers Thread: CPUs / GPUs / HSFs / Fans: New Products and Reviews
-
As far as I know, may RGB lights ang top plate and may included na RGB LED controller. Other than those two same lang ang spes and features. -
@tpcjml: may konting difference specs wise... better check the specs na lang nung dalawa...
gammaxx gte
<click here for link>
gammaxx gt
<click here for link>
sa presyo... malaki... gt is at 2,450 while gte is at 1,490... kung trip mo yung top plate na may kulay... mag gt tuf (gt tga) ka na lang at 1,730... sabi nga ni sleepygeepy... gt ang may kasamang rgb controller... kaya kung walang header ang motherboard mo for 12v 4-pin rgb at gusto mong ma control ang rgb lights eh go for the gt... 'yun nga lang mahal... kung merong header naman mobo mo for 12v 4-pin rgb at gusto mo na mag control eh mismong mobo software eh you can go for either gte or gt tuf (gt tga)...
-- edited by STASIS on Sep 18 2019, 09:36 PM -
I just want to confirm about Ryzen 3000s Temps. I'm not sure where to post this clarification. Recently upgraded to Ryzen 5 3600 and saw that the CPU Temp monitoring sa MSI Afterburner is missing. So I googled it and found out that you can link Hwinfo64 sa MSI afterburner to monitor CPU temps. Did it and while running SOTTR Benchmark. It shows that the CPU Temp was only around 45-50C. I'm not sure kung accurate yung readings. Using a CM Hyper 212 Black Edition Push/Pull config. Though voltage readings are accurate.
-- edited by jmac2010 on Sep 18 2019, 09:50 PM -
I just want to confirm about Ryzen 3000s Temps. I'm not sure where to post this clarification. Recently upgraded to Ryzen 5 3600 and saw that the CPU Temp monitoring sa MSI Afterburner is missing. So I googled it and found out that you can link Hwinfo64 sa MSI afterburner to monitor CPU temps. Did it and while running SOTTR Benchmark. It shows that the CPU Temp was only around 45-50C. I'm not sure kung accurate yung readings. Using a CM Hyper 212 Black Edition Push/Pull config. Though voltage readings are accurate.
Maybe try AIDA64 for half an hour, then check again sa HWiNFO64. -
Hi guys! Ok po ba ang PC Cooler Corona case fan? Thanks!
-
^
- Post deleted #12253525
-
parang ang hirap sa bangs ng corona kung di supported ng mobo mo ang argb (rgb only)... molex for power sa proprietary rgb controller... although may adaptor naman for argb para direct control sa mobo... maganda na rin na pwm siya and hydraulic ang bearing... all in all good siya if you can live with those little cons... according sa yt video ha.. unless binago na nila design ng connectors nila...
-
guys sa tingin nyo nasa magkano nlng kaya bentahan ngayon ng mga old CPU Cooler gaya ng Deepcool Ice Blade Pro at Coolermaster Vortex Plus meron kasi ako dito nakatambak lang. hindi ko rin magamit kasi naka ID Cooling SE214 RGB CPU cooler na ako
-
@Bringer24: start with the IFS section... baka may mga seller din na kaparehong nagbebenta...
-
Lahat ba ng noctua NH-U12S ngayon may kasama ng AM4 bracket, saka mas ok kaya perfrormance nito sa overclocked ryzen cpu kesa sa idcooling frostflow 240mm AIO?
-
^ Depende ata sa year of production. Pero kung sakaling walang included na am4 bracket pwede ka magrequest sa noctua. sesendan ka nila ng free bracket.
- Post deleted #12256350
-
@JDG
Lahat ba ng noctua NH-U12S ngayon may kasama ng AM4 bracket, saka mas ok kaya perfrormance nito sa overclocked ryzen cpu kesa sa idcooling frostflow 240mm AIO?
Look for this one: Noctua NH U12S SE AM4, and what processor will you pair this with? But surprisingly, the Deepcool Gammaxx 400 out performs the U12S :D -
Lahat ba ng noctua NH-U12S ngayon may kasama ng AM4 bracket
tulad ng sinabi ni gameguard, depende sa year ng production. Kung matitignan mo yung box, malalaman mo kung may pang AM4 na.
Ganyan ginawa ko nung binili ko ung nh-d15 ko. Iniinsist nung tindahan na pinagbilhan ko na dapat yung d15 se daw kasi ayun yung may am4. Pero ipinakuha ko yung box ng d15 nila para icheck at nakitang nakasulat na may am4 support na. - Post deleted #12256373
-
Deepcool's Assassin III aircooler
<click here for link> -
@JDG
Lahat ba ng noctua NH-U12S ngayon may kasama ng AM4 bracket, saka mas ok kaya perfrormance nito sa overclocked ryzen cpu kesa sa idcooling frostflow 240mm AIO?
Look for this one: Noctua NH U12S SE AM4, and what processor will you pair this with? But surprisingly, the Deepcool Gammaxx 400 out performs the U12S :D
Ryzen 1600 cpu ko naka OC to 3.8ghz + idcooling frostflow 240 more than 2 years na itong system ko pansin ko kasi mas mataas na yung temp at may ingay na sa pump kumpara nung bago pa siya kakalinis ko lang din ng radiator and fans tapos fresh thermal paste. Gusto ko sana mag air cooling para tahimik saka yung mas maganda ng konti performance kesa dito sa AIO ko saka dapat 160mm or less yung height at pasok sa budget na 3k.
-- edited by JDG on Oct 03 2019, 04:06 AM -
@JDG
Ok sana mag Noctua NH-D15 SE-AM4 kasi same narin cooling performance niya as 240mm AIO. Yan ang gamit ko ngayon sa Ryzen 5 1600X overclocked to 3.8GHz. Ang temps nasa 53C when playing games, kapag idle nasa 30C and below madalas. Super tahimik ng fans at mas maingay pa yung case fans / videocard fans.
Problem lang may kamahalan ang Noctua NH-D15 SE-AM4 (Php 4,330) at kailangan niya ng 165mm CPU cooler clearance sa case.
Baka gusto mo i-try sir ang ID Cooling SE-207 twin tower / dual fan cooler. Price nasa Php 2,120 lang and 159mm in height.
A better option is try mo mag order ng Scythe Fuma Revision B sa mga online shopping sites. Nasa Php 2,665 ang price pero hindi ko alam magkano shipping.
-- edited by sleepygeepy on Oct 03 2019, 04:20 AM -
^ Thanks! Baka try ko yung SE 207 wala lang ako makita reviews sana mas ok ito kesa sa gammaxx 400 or nh-u12s.
ito current temp ko ngayon sa aida64 stress test stable naman siya kahit 1hr pa pero kapag cinebench r20 nag ka-crash siya.
-- edited by JDG on Oct 03 2019, 01:05 PM -
@JDG
Ryzen 1600 cpu ko naka OC to 3.8ghz + idcooling frostflow 240 more than 2 years na itong system ko pansin ko kasi mas mataas na yung temp at may ingay na sa pump kumpara nung bago pa siya kakalinis ko lang din ng radiator and fans tapos fresh thermal paste. Gusto ko sana mag air cooling para tahimik saka yung mas maganda ng konti performance kesa dito sa AIO ko saka dapat 160mm or less yung height at pasok sa budget na 3k.
You don't really need an aftermarket HSF for that, I have the same processor and the same OC using the stock Wraith Spire (RGB since I bought it from someone's Ryzen 1700) since day 1 :D The Deepcool Gammaxx 400 (php1200) is already an overkill for this processor.
-- edited by fakuryu on Oct 03 2019, 06:17 PM -
Had an experiment kanina with or without Air Filter for my R5 3600 + Hyper 212 Evo BE + CM NR600. Gumawa ako ng custom Air Filter from materials na binili ko sa online store. Wala kasing ait filter included sa front ang NR600. I was able to make the CPU -3C pag walang Air Filter. Pero decided na lagyan nlang, I think the Air filter would really help in filtering dust. sacrifice ko na yung 3C since while playing games nasa 45-50C lang naman ang temps with filter on. Based sa reviews online, temps would really help in making your Ryzen 3000s run at a higher frequency longer, medyo overkill and hindi lang talaga worth it mag 240mm AIO for 3600. lugi sa ROI.
-- edited by jmac2010 on Oct 03 2019, 08:17 PM
-- edited by jmac2010 on Oct 03 2019, 08:18 PM -
@JDG
ito current temp ko ngayon sa aida64 stress test stable naman siya kahit 1hr pa pero kapag cinebench r20 nag ka-crash siya.
Possible din na hindi CPU temps ang nag cause ng crash but unstable ang overclock dahil kulang sa voltage or bumibitaw yung memory controller.
It could be na may ginagawa si Cinebench R20 na mas intensive tulad ng AVX workload which is causing the crashing on some part of your setup. Hindi ako gumagamit ng Cinebench R20 to stress test, so just guessing lang hehe...
As a sanity check try running Cinebench R20 at stock settings baka, kasi nag-crash din even at stock which means iba ang cause ng issue. I would also try a different stress test like Prime95 kasi pwede mo i-enable or disable ang AVX instruction set and see if that test crashes the CPU. -
@sleepygeepy
Na try ko narin i run ang cinebench r20 ng stock settings ang cpu at ram stable naman siya kahit paulit-ulit pa, na test ko narin cpu or ram lang naka oc kaya temps ang tingin ko cause ng crash sa r20. kapag naka aircon ako nakakatapos ng isang run pero kapag mag 2nd run ayun crash na.
-- edited by JDG on Oct 04 2019, 05:51 AM -
@JDG
Most likely cooling na yung problem. Pero napansin ko din sa screenshots mo sir na yung Core voltage mo nasa 1.417 volts? Parang ang taas masyado for a 3.8GHz overclock? Usually kapag 3.8GHz nasa 1.375 volts and below, lower is better sana.
Hindi kaya masyado mataas ang voltage? -
^ Naka set siya sa bios ng 1.4v dun kasi siya stable yung load line calibration(high setting) yata nag oover volt kapag may load kaya lumalagpas sa 1.4v. Ewan dati kaya naman ng 1.35v ang 3.8ghz kada bios revision nitong asus b350 prime plus nag iiba behavior ng oveclock.
-
@JDG
Be careful when using LLC kasi pwede ma-damage ang processor kung masyado malakas ang setting. Nagkakaroon ng voltage spike kapag yung CPU is coming from a heavy load (tulad ng benchmark) then babalik sa idle state. Hindi captured ang voltage spike sa tools tulad ng CPU-Z or HWiNFO kasi masyado mabilis ang duration (milliseconds lang).
When using LLC dapat timplahin mo din ang Vcore voltage. When using normal to low levels of LLC pwede mo taasan ang Vcore voltage. When using moderate to high levels of LLC dapat babaan mo din ang Vcore voltage para hindi mag overcompensate.
Suggestion lang sir... try mo i-set na ganito:
- CPU Core Voltage Setting = Manual mode
- CPU Core Voltage Value = 1.35v to 1.375v but try not to go above 1.38v
- VDDCR CPU Load Line Calibration = Regular to Medium setting, but try not use High or Extreme
or pwede din ganito:
- CPU Core Voltage = Offset mode
- CPU Offset Mode Sign = plus sign (+)
- CPU Core Voltage Offset = 0.00625 to 0.01250
- VDDCR CPU Load Line Calibration = Regular to Medium setting, but try not use High or Extreme
May magandang guide si ASUS for B350 overclocking... pwede mo din pagaralan ang settings nila:
-
^
Thanks! 1.406v talaga siya stable (prime95, aida64, realbench, cinebench r20) kahit naka auto na yung LLC and stock ram setting.
-- edited by JDG on Oct 04 2019, 08:02 PM -
-
any recommended CPU cooler s dell optiplex 7040 Sff HND ko kc alam kung standard ba un cooler nitong optiplex my nkikita ako HND lang me sure kung pwd like cooler master i30 / cooler master x dream 1117 / deepcool ck-11508 /