Forum Topic

The Coolers Thread: CPUs / GPUs / HSFs / Fans: New Products and Reviews

  • Mas ok ba mag palit to IS-60 from se-224xt sa itx board pansin ko kasi mataas vrm temps ko?

    -- edited by JDG on Sep 14 2022, 10:57 PM
  • Arctic does it again!




    Nakuha ko na yung free service kit para sa LFII 360 sa local post office. Inabot din ng almost 3 weeks kumpara nung nag request ako sa kanila ng libreng LGA 1700 mounting kit na inabot ng two weeks.

    As a manufacturer, katulad ng experience ko sa Noctua, maganda din ang aftersales service ng Arctic. Madaling kausap at mabilis mag respond.

    -- edited by MrBungle on Sep 14 2022, 11:32 PM
  • @JDG
    Anong CPU, mobo & case gamit mo?

    -- edited by Ignus on Sep 15 2022, 02:06 AM
  • ^ Ryzen 1600, Gigabyte B450i aorus pro, tecware fusion
  • ^Pwede ka naman gumamit ng shorter tower cooler(Thermalright AK90 or ID Cooling SE 914 XT) + side mounted slim fan na nakatutok sa motherboard.



  • Sakto dumating na din sakin. Walang update update pero dumating bigla sa post office.

    Kung meron nga bara ung coldplate fins, sana malaki ung performance improvement neto.
  • mga expert, anong ok na medyo budget lang na CPU cooler na shorter than 155mm height? to be used with a Ryzen 5600
  • ^ID COOLING SE224 XT BLACK
  • @judef

    hsf, ID Cooling SE224XT
    hsf, Cryorig M9Plus
    hsf, Thermalright Assassin X 120
  • ID Cooling SE225XT black...
  • Recently lang din ako nag file ng order ke Arctic ng replacement kit, waiting mode :V.

    @MrBungle and GENTLEMENT: musta installation?
    Mukhang overkill daw binigay na replacement, silicon gasket instead of EPDM na rubber gasket

    -- edited by ViperXtreme on Sep 21 2022, 07:04 PM
  • @ViperXtreme

    Hindi ko pa naikabit yung akin. Naka Noctua NH-D15S ngayon yung rig ko eh.

    Planning to build a 2nd rig sa kabilang bahay so doon ko palang ikakabit yung Arctic.
  • Any users of ID Cooling SE207 XT Slim? Want to buy it solely for the looks pero gusto ko lang malaman kung okay ba performance sainyo?
  • @ViperXtreme

    Ung swap mismo ng gasket and coldplate, wala pang 10 minutes. Basta gamitin ung included na 2 new screws instead of ung 2 short screws.

    Ibang usapan ung pagtanggal ng cpu na dumikit (ryzen). Kahit lutuin muna ng OCCT/Prime95, dikit pa rin ung processor sa aio. Buti na lang di na kamot ulo socket sa next gen ni ryzen.
  • @TPC_GameGuard025
    Similar siya sa single tower cooler based on comparison with NH-D12L(roughly same performance sa Mugen 5). Mas maganda ng konti performance ng SE-214-XT with 5600(x), 5700x IMO.





    -- edited by Ignus on Sep 22 2022, 05:07 AM
  • Meron po ba ditong naka zoomflow 240 XT? Ask ko lang if maingay din ba yung sa inyo? yung akin kasi parang aircon sobrang ingayyy. Any tips?
  • ^ naka pwm ba yung fans?
  • ^ Di ko po sure T_T. Nag try ako mag adjust ng fans sa BIOS, kaso parang ang ingay parin (or di lang tama yung nagawa ko lol)
  • ^Download HWInfo64 para mamonitor mo yung fan speed sa desktop after mo masetup yung fan curve sa BIOS.
  • @d0gBone

    https://github.com/Rem0o/FanControl.Releases

    Check mo yan, probably the best fan controller and temp SW na nagamit ko
  • https://github.com/Rem0o/FanControl.Releases

    Check mo yan, probably the best fan controller and temp SW na nagamit ko


    Solid ito sir Carlo!!
  • https://github.com/Rem0o/FanControl.Releases

    Check mo yan, probably the best fan controller and temp SW na nagamit ko


    Solid ito sir Carlo!!
  • Thanks mga boss! Dinownload ko na :3 pero ang issue naman ngayon di ko alam gamitin lols
  • ^may video dun sa link kung paano
  • Kaya palang matalo ng LF II 120 with fan swap yung NH-D15 & AK620 lol.

  • ^Disappointing yung pricing ng mainland sellers, mas mahal ng 500+ yung IS-55(kahit yung non RGB) sa IS-50X v2.

    Sakto naman yung cooler sa Dan A4-H20, RVZ-02, Node 202, etc., may pamalit na sa AXP90-X53, IS-60, IS-50X for those cases. Baka ma-phase out narin yung IS-60 Evo kasi hindi gumagamit ng AMD backplate.
  • kakadating lang

  • Finally replaced my gasket, but also took pics of the old one, me minor gunk na nagdedevelop dun sa old one after using it for almost 1 year

    Btw, some batch of Arctic MX-5 din daw pala me issue, buti sakin wala since nung nagpalit ako gasket, pansin ko ok naman yung paste ng sakin for almost 1 year of use, sa iab parang me oily residue daw. Incoming na din MX-6







    -- edited by ViperXtreme on Oct 09 2022, 12:31 AM
  • AM4 offset doesn't help with AM5 thermals: