Forum Topic

The Coolers Thread: CPUs / GPUs / HSFs / Fans: New Products and Reviews

  • walang temp sensor yung rx 580 ko kaya di ko mami-measure kung may changes ba sa temp. meron lang is yung gpu which is noctua nt-h1 ang gagamitin kong paste...
  • ^

    Oks lang master as long as hindi sya mag throttle, that means good contact yung Thermal pads sa VRAM, Mosfet, VRM etc.
  • napalitan ko na ng pads and repaste... measured stock pads... 0.5mm and 2.0mm nga same sa reddit post...

    though i can't measure the mem. temps kasi walang sensor para diyan ang card ko... di naman siya nag throttle... ok na rin na nag repaste ako ng tim... from stock na x number of years na naipon... at least medyo fresh siya ^^... (did not take ambient temp. ^^... daming gawain)

    stock -
    idle: 45° c
    2 min +/- furmark: 71° c

    repaste with noctua nt-h1 (wala namang curing stage/time 'to ^^) -
    idle: 43° c
    2 min +/- furmark: 64° c

    kulang pa nga hehehe... balak ko kasi dati eh kumuha ng ultrasonic cleaner na kayang mag accommodate ng mahahabang gpu... pero pricey pa so far hahaha... balang araw... hahaha...

    -- edited by STASIS on Jan 02 2023, 01:17 AM
  • WTF, may air cooler na pala NZXT. xD


  • meron na... pero OP... ^^
  • $60 yung price ng T6 with dual M25 fans. Thicker rad for their gen 8 Asetek AIO'stoo.


    New Air Cooler benchmarks vs NH-D15 & NH-U12A



    May available narin pala na single T30 fan version ng T6 cooler sa Al*Express



    -- edited by Ignus on Jan 05 2023, 02:29 PM
  • @STASIS

    Nice reduction sa temp! Sigurado cooler din ang temps ng vram, vrm, mosfets, inductors mo if kasama silang napalitan ng pads. Sana may kasamang sensor din yung mga parts na yan but most likely tataas yung price kaya yung gpu lang yung may reading. Anyhow, it seems goods gamitin yung Maxtor pads, maorder din nga :)
  • @RyuzakiL: old card na kasi... sadly yung powercolor walangsensors for memory temp...

    may nakita rin ako sa shakee na isang seller... "pisi stseb"... kumuha kasi ako ng 2 thermalright hr-09 2280 pro m.2 ssd cooler... nakita ko na meron siyang gelid na pads and brand na "zessio" thermal pads... ok rin presyo nung zessio pads... meron ding pricey na 3d graphite thermal pads ang zessio na may 40W/m.K... pangextreme siguro hahaha... pang gddr6x mems... meron din siyang copper and nickel plated copper memory plates para sa nvidia cards...

    @Ignus: daming lalabas na bago...
  • May info sa Chinese forums for Deepcool Assassin 4. May 140mm version ng FK120 din daw na ilalabas.






    -- edited by Ignus on Jan 06 2023, 02:45 PM
  • naglabas din pala thermalright ng black version ng hr-09 2280 pro nila...
  • @ignus:

    ito yung sa dc...

    <click here for link>

    yung sa noctua naman... delayed...
  • ^Mayroon pala silang sample sa CES

  • New high speed & 140mm Mobius fans, refresh din ng Q500L na matino na yung ventilation + mesh & TG side panel + side AIO/fan bracket.



    -- edited by Ignus on Jan 07 2023, 01:37 PM
  • Excited for DeepCool Aircoolers with LED Display! :D
  • nagiisip tuloy ako kung mag copper plate ako sa rx 580 ko... hahaha... may nakita na akong seller sa shakee... same upsiren plates ang binibenta nila (same as aliexpress)... ang yung isang seller eh may nickel plated variant...

    copper plate



    nickel plated cp

  • @STASIS

    Nice! Pabulong naman master kung anong yung exact name ng seller. Baka meron sila for Palit 3080 series :)

    Anyhow, kung mura naman, grab mo na then samahan mo na din ng kapton tape just incase may konting galaw / hindi tight yung tolerance yung plates nila.

    Good find master! Hindi na tayo oorder sa malayo XD
  • @RyuzakiL: ygpm

    2 seller na maayos ang reply... though sa 3080 eh eh may 2 variant... yung plate siya saka yung shims... ask mo na lang seller kung ano mas preferable and mas maganda...

    and depende yata sa video card eh need ng kapton tape (insulated tape)... pansin ko more on nvidia cards...

    pero if ever umorder ako eh sabayan ko na rin ng kapton tape (another seller)... sabi naman ng seller eh no need na daw sa rx 580 kasi wala naman daw tatamaan as pero inquiry niya... pero just to be sure eh lagyan... sabi rin ng isang seller eh the same... lagyan to be on the safer side...

    sa instruction ni upsiren (aliexpress) eh need ng thermal paste na non-conductive or walang metal particles...

    balak ko yung thermalright tf9... both sellers eh nagsabi na ok daw gamitin yun and non-conductive naman as per thermalright info...

    ask mo na rin kung compatible yung card... and if ever mas advisable na may image o pic ka ng bare pcb para mas sure... siguro naman marami nang nagbaklas ng palit 3080 nila... hehehe...

    pero for redundancy... samahan ko ulit ng order nung maxtor 2mm and 0.5mm na thermal pads...

    -- edited by STASIS on Jan 09 2023, 12:26 AM
  • @STASIS

    Ayown, thanksu! Yes, kapton tape is a must have kung mag copper plate mod - just to be on the safer side.

    Let us know your experience in using it though I'm sure lalo pang gagandan vram temps ng RX 580
  • @RyuzakiL: too bad ito lang kaya ng card ko (for sensor)... ^^ forgive my card hahaha...


  • Anyone here running a 5600x and a noctua nh-d15 chromax black? What are temps are you getting?
  • Post deleted #12438578
  • Post deleted #12438579





  • DAMNIT Deepcool! Kakapalit ko lang ng HSF ngayon napapaisip nanaman ako haha
  • intayin ko yung bagong fan ng noctua...
  • may massuggest ba kayo na bang for the buck 140mm clearance na air cooler para sa ryzen 5600? planning to get tecware vxm kasi. thanks
  • @curenei: any coolers naman that fits your budget and thermal needs ng processor mo is ok as long as pasok sa clearance ni vxm...

    deepcool <click here for link>

    id-cooling <click here for link>

    thermalright <click here for link>

    then cross check mo na lang sa ratsada o shakee for price...
  • anyone has experience using ceramic heatsinks? nagbabalak akong lagyan ng thermal pads back plate ng rx 580 ko and dagdagan ko additional heatsink sa backplate...
  • measured the space between backplate and pcb... 2.0mm... inquired sa seller ng thermal pad sa shakee kung anong mas applicable... 2.5mm or 3.0 mm... hassle mag install ng copper plate kung yun uunahin then thermal pad backplate later... sa teardown kasi... need mahiwalay pcb and cooler bago magka access sa backplate removal...

    wala akong mahanap sa interwebs for the backplate thermal pad size if ever may nag attempt (to write it down) na lagyan... i saw one video pero walang mention of size...
  • to make sure regarding the right thermal pad size for the in-between ng pcb and back plate... minabuti ko nangmag e-mail mismo sa powercolor support... ma sumagot naman pero di yung tinatanong ko hahaha... eto reply...

    Dear Sir/Madam,

    For thermal pad thickness :



    for memory : 1.75mm

    for power part : 1 mm



    And please be noted that modify the hardware will void all the warranty.



    Best Regards,

    RMA department


    replied again reiterating my query for backplate thermal pad size... sinabi ko rin sa query kong nauna yung mga stated na... 2.0mm space between the pcb... then link nung vimeo video na naglagay siya ng thermal pads pero red dragon rx 580 naman (using 2.5 mm siguro na thickness

    Dear Sir/Madam,
    We didn't have any ideas for this. Maybe you can ask from https://vimeo.com/382179123 to support.

    Please be noted that modify the hardware will void all the warranty.

    Best Regards,
    RMA department


    wala talaga hahaha... nag order na lang ako ng 120 x 120 x 2.5 mm na maxtor thermal pad... si "gitna" kasi eh naka holiday pa rin hahaha...

    kapag dumating na eh baka pasadahan ko yung nilagyan ko ng 0.5 mm pads (vrm)... patungan ko ng another 0.5 mm para maging 1 mm... yun kasi sabi sa email ^^

    -- edited by STASIS on Jan 24 2023, 03:43 AM
  • Problem : gumagasgas ung front fans sa case at higher speeds (phanteks P500A / lian li lancool III)

    Solution : naghanap ng plastic washers (3-4mm ata) at nilagay between fan and case when remounting