guys hingi naman ako ng feedback about SWIFTECH H220 X2. (pwede ring X1)
balak ko sana bumili pero halos negative lahat mga nababasa ko internet about it.
personal experience sana. ty!
Forum Topic
Official Liquid Cooling Users (see faqs on page 157)
-
@cold_iron
thanks sa info -
my Kraken X62 pump died.. :( warranty time.. buti nandito pa yung stock cooler ng Processor ko..
-
^
Bilis naman lemon unit nakuha mo..... -
^
oo nga sir.. napansin ko kasi yung utilization ng CPU ko nasa 8% max lang and sobrang bagal ng PC ko.. then looking on my Rainmeter CPU load nasa 100% siya.. tried opening the HWmonitor nasa 100c yung temp.. nag thermal throttle yung CPU.. Turned off the Rig and opened my case.. hinawakan ko yung radiator.. malamig.. yung mainit na part nasa Processor lahat
although its better to let it die sooner para mapawarranty.. kesa pag malapit na matapos yung warranty dun palang mamatay
-- edited by immortalkings on Mar 07 2017, 06:52 AM -
@ice_644
I am using H220-X on my rig, eto yung pinalit nung distro after masira yung H220 ko na orig.
2yrs na naka salpak, smooth as a whistle pa rin.. tandaan mo, mas marami ang aangal sa internet kasi yung mga satisfied eh tahimik lang :) - Post deleted #11902101
-
First time water cooling. May error lang sa IN from rad to reservoir dahil masyado mataas tas wala din akong angled fittings for now, kaya na bend ng husto. Ayusin ko nalang siguro pag mag change na ko to hard tubes + pag isama ko na si GPU sa loop. :)
-- edited by thescout on Apr 06 2017, 03:30 AM -
from AIO gusto ko mag move sa custom water cooling , kaso hindi ko alam kung anung mga parts need bilihin.
meron bang nabibili ung kit na pra less hasle wala kasi akong makita salamat! -
@Raleiigh
may mga nagbebenta na ng kit dito. search mo lang. ranging from 10-20k
@thescout
san ka nakakuha ng Pacific RL360? pwede pa PM? :) baka kasi bawal magbanggit dito ng seller, been looking for this kit locally.
-- edited by hatred123x on Apr 03 2017, 08:14 AM -
@thescout
san ka nakakuha ng Pacific RL360? pwede pa PM? :) baka kasi bawal magbanggit dito ng seller, been looking for this kit locally.
Inorder ko lang sa Amazon bro, pina ship ko via LBC SC. Di ko akalaing madali lang pala mag custom loop at napaka exciting gawin. =)
@Raleiigh
from AIO gusto ko mag move sa custom water cooling , kaso hindi ko alam kung anung mga parts need bilihin.
meron bang nabibili ung kit na pra less hasle wala kasi akong makita salamat!
Kung nakita mo yung post ko bro, kit lang gamit ko. Marami din factors na icoconsider like kung anung case ba gamit mo, kung anung magkakasyang radiator, soft o rigid tubes ba, etc. pagdating sa pagpili ng parts. =) -
@thescout
salamat sa sagot mo. kahit wag mo na sagutin last PM ko. andito na pala sagot. hehe :) -
Mga sir, ano po kaya ok na mura pero ok na liquid cooling for CPU? Balak ko kase gawin g 4.6 4790k pero naka air lang gamit ko. Appreciate your feedbacks!
-
Mga sir, ano po kaya ok na mura pero ok na liquid cooling for CPU? Balak ko kase gawin g 4.6 4790k pero naka air lang gamit ko. Appreciate your feedbacks!
H100i v2, Kraken x52, any 240 rad and above. Pero mas ok kung 360 rad na AIO pag ganyan kataas na clocks bro. -
Mga sir, ano po kaya ok na mura pero ok na liquid cooling for CPU? Balak ko kase gawin g 4.6 4790k pero naka air lang gamit ko. Appreciate your feedbacks!
At the minimum, ID Cooling Frostflow 240L yung cheapest at Php 3,450. But take note na may konting difficulty sa installation niya since yung 4 long bolts or mounting studs nag spin freely at hindi nag-lo-lock sa backplate. So medyo tricky i-tighten yung waterblock kasi nag spin freely yung 4 long bolts, unless gagamit ka ng pliers. But overall maganda naman ang cooling performance ng Frostflow 240L if mounted correctly.
Kung willing ka to spend a bit more, suggestion ko go for DeepCool Captain 240 EX for Php 3,990. Mas madali siya install, mas tahimik ang fans and pump, plus it comes with a 4-port fan hub. Mas matagal "daw" ang lifespan ng pump niya but this remains to be seen... your mileage may vary. Cooling performance is about the same as the Frostflow 240L but I assume mas tahimik ang operation.
If you want more cooling performance, meron din yung DeepCool Captain 360 EX for Php 5,000. Based siya on a 360mm radiator with triple 120mm fans so potentially mas malakas ang cooling performance. Yun lang it only comes in black-red theme and yung included na fan hub has 4-ports only so not suitable for push-pull configuration.
Kung ako mag suggest, just go for the ID Cooling Frostflow 240L or the DeepCool Captain 240 EX and overclock mo yung Core i7-4790K with reasonable voltage and call it a day. Problem din kasi sa Haswell is hindi maganda ang contact ng die to heatspreader so kahit malakas na AIO cooler pa gamit mo, hindi masyado bumababa ang temps until a certain point. Kaya mga iba mas prefer nila i-delid yung processor to get the lowest temps on their Core i7-4790K. -
@Sleepygeepy
Salamat sa advise sir! Actually, di ko masyadong alam yung mga brand na sinuggest mo pero nung chineck ko maganda mga reviews nila. Salamat sir! I haven't considered mag delid kase baka masira lalo na kung ako gagawa. Nag mamatter ba siya kung dual or single fan sa radiator? -
@drunkonpiss2
Salamat sa advise sir! Actually, di ko masyadong alam yung mga brand na sinuggest mo pero nung chineck ko maganda mga reviews nila. Salamat sir! I haven't considered mag delid kase baka masira lalo na kung ako gagawa. Nag mamatter ba siya kung dual or single fan sa radiator?
Yes sir, dangerous din mag-delid kasi mataas ang risk na ma-damage ang CPU or substrate especially kung hindi ka gagamit ng delid tool. Pero admittedly it is a high-risk / high-reward modification kasi pwede bumaba ang CPU temps mo by as much as 10-12 degrees.
Regarding dual-fan setup / push-pull setup sa radiator, nag matter lang siya kung ang radiator na gamit mo are the very thick ones or mataas ang fin density. Pero if you are just using the regular 27mm thick radiators na gamit ng mga AIO watercoolers, sa tingin ko hindi worth it yung expense of adding extra fans. Konti din ang increase in cooling performance by adding more fans, like maybe 2-3 degrees at most. Just run the fans at higher RPM to compensate.
Pwede ang push-pull setup kung gusto mo ng quiet operation without sacrificing cooling performance. So with push-pull pwede mo i-run ang fans at lower speeds (like 900 RPM) but still get the same airflow through the radiator. So same cooling performance with less fan noise.
Pero kung priority mo ang better cooling performance sa AIO watercooler, mas sulit if you buy an AIO with bigger radiator area tulad ng 280mm or 360mm radiators or look for AIO watercoolers with thicker radiators. One example is yung Cryorig A40 Ultimate which is using a 38mm thick radiator.
BTW, someone is selling an EK Predator 240 with unopened box sa TipidPC items for sale. Kung naghahanap ka ng AIO watercooler with the same performance as a custom watercooling kit, you might want to check this out. -
@sleepygeepy
Salamat sir sa detailed information. Kung sakali first time ko mag water cool. Parang di kase practical kung di naman ako mag OC kaya nag air nalang ako. Sir, yung power po pala ng mga water cooler parang dun sa fans din ba ng air cooler katulad ng evo 212 na maliit na pin? -
Good day mga sir! Need ko lang ng input, kasya kaya yung swiftech h240 x2 prestige sa NZXT Manta using Asus Maximus Impact VIII? Top mount or front mount? TIA!
-
@drunkonpiss2
Salamat sir sa detailed information. Kung sakali first time ko mag water cool. Parang di kase practical kung di naman ako mag OC kaya nag air nalang ako. Sir, yung power po pala ng mga water cooler parang dun sa fans din ba ng air cooler katulad ng evo 212 na maliit na pin?
Sa AIO watercoolers meron two types of power connections, one for the fans and one for the pump.
Yung sa fans usually gumagamit sila ng 3-pin or 4-pin connector na pwede mo i-plug sa fan headers ng motherboard. Sometimes yung AIO watercooler may kasamang fan hub na pwede mo dun ikabit lahat ng fans ng radiator. Then yung fan hub may isang plug papunta sa PSU (for power) at isang plug sa motherboard fan header (for RPM sensing / control). Mas maganda gumamit ng fan hub dahil mas malinis ang wiring at hindi mahirap ang cable management, especially kung 3 or more fans na yung gamit mo.
Yung medyo critical na power connector ay yung nasa pump kasi mas mataas ang amperahe niya. Also some AIO watercoolers may requirement na yung pump ay running at full speed palagi. Mga bagong motherboards ngayon may dedicated pump header sa motherboard so check your motherboard baka meron dedicated pump header. In case walang pump header yung motherboard mo, most likely pwede mo siya ikabit directly sa PSU (for power) with another plug sa motherboard fan header (for RPM sensing).
Anyway before buying the AIO watercooler mas maganda kung check mo yung review or download mo yung user manual niya para magka-idea ka kung paano yung wiring ng fans and pump :-)
-- edited by sleepygeepy on Apr 05 2017, 11:48 PM -
Guys question, i got a Water 3.0 Performer C thermaltake, kakasya kaya to sa 1151, ang gulo kasi ng manual sa internet pede 1151 sa manual sa box hindi pede. baka may ganito kayo, pa help
-
just found out that thermaltake pacific DIY LCS radiators (Rxxx, not sure with RLxxx) are made out of "zinc infused" aluminum. mukang XSPC kit or Alphacool kit ang bagsak ko talaga.
-- edited by hatred123x on Apr 07 2017, 08:40 AM -
tagal ng RMA ng Kraken X62 ko... mag 1 month na this April 7 :(
-
Pending muna
-
^Wow, direct shipping lahat yan bro?
-
^
Hindi bro, mahal pag direct shipping hehe pinasabay ko lahat yan sa cousin ko nung umuwi siya galing cali hehe -
Ehehe kaya nga eh kase oorder sana ko ng bagong coolant ni EK, yung Cryo. Ang mahal ng DHL shipping, sing-presyo ng tatlong coolant. = ]
-
gandang umaga mga bossing. planning to buy my rig today pero still undecided sa AIO na gagamitin. anu and mas recommended nyo IDCooling Frostflow 240L or Deep Cool Captain 240EX? planning to use it on an i7-7700k on a based clock
-
@kotikiti
natanong ko na dati dito yan ID cooling frostflow 240L ang recommended sken... -
id cooling frostflow 240l ba napapalitan ngtube? gusto ko sana gawin transparent tapos coolant kulay red it is possible ba sir? planning to buy