-
alveey
on
27 May 17 @ 07:56 AM #
hmm. if that's the case, you may want to see if you can buy 'thermal pads' instead of the normal paste. though i'm not sure how much you'll require or how much the pads will 'shrink' pag nainitan na. pagpatung-patungin nyo lang mula cpu contact to block contact until may clearance na from the mobo capacitors.
may nagbbenta po nun dito, search nyo na lang 'thermal pad'. i'm sure applicable naman yan.
-
k_9virus
on
27 May 17 @ 10:44 AM #
my current loop lol
-
RSDrifter
on
27 May 17 @ 05:38 PM #
Hi a very long time lurker here.
iam interested to try water cooling. right now on my ryen naka id cooling frost flow 240L.
but i want to try an entire loop setup.
can you give me a list of parts for a beginner for a cpu ryzen 1600x and gpu rx480 loop? TIA
-
hatred123x
on
27 May 17 @ 06:14 PM #
@RSDrifter
get a kit. there is a shit tons of water cooling parts. pero kung trip mo DIY, watch mo chanel ni jayztwocentz and dazmode. YT gurus ng watercooling yang dalawa.
@psyq
try mo muna drain then remove the cpu block. malalaman mo naman if may contact pag kumalapt TP. saka filled ba ng water yung buong block?
-- edited by hatred123x on May 27 2017, 06:16 PM
-- edited by hatred123x on May 27 2017, 06:17 PM
-
feroxss
on
27 May 17 @ 06:16 PM #
@RSDrifter get a kit like what @hatred123x said, it would be easier to do
-
RSDrifter
on
27 May 17 @ 07:31 PM #
@hatred @ferox
Which kit do i start with na puwede na cpu and gpu?
-
feroxss
on
27 May 17 @ 07:34 PM #
Usual EKWB if branded. or look for seller that can do a cpu and gpu block kit for you.
-
hatred123x
on
27 May 17 @ 07:38 PM #
@RSDrifter
Branded: go with EKWB
Chinese: go with aliexpress
Local: go with TPC
ask the seller. they can guide you and give you quotation.
-
psyq
on
28 May 17 @ 03:52 AM #
Update, loop is working now. Temps are good. My CPU on load and idle is 42c and around 52c on load. GPU naman is 40c while on load sa FF XIV.
Eto na sya ngayon, ang sagwa nung longest tube ko from the CPU to the front rad. Uulitin ko to siguro next week. Ampanget ng itsura dun sa bend nag-expand yung pipe at parang nag kink sya pero wala namang crack kaya ginamit ko na for now. Yung CPU block ko talaga yung naging problema kahapon tumatama kase sa capacitors, ayaw ko na din pwersahin baka madamay pa yung mobo.
Patawarin ang bending skills hehehe.
-- edited by psyq on May 28 2017, 03:55 AM
-
hatred123x
on
28 May 17 @ 04:39 AM #
@psyq
nice one sir! sarap ng feeling no? yung after magtulo tulo yung tubig sa loob ng pc mo then mapapagana mo at the end. :)
final form sa ngayon habang nag hihintay sa gpu upgrade.
-- edited by hatred123x on May 28 2017, 04:54 AM
-
psyq
on
28 May 17 @ 05:03 AM #
@hatred
Oo sir! The biggest change was from the GPU, from 85c load ngayon 52c max after mag normalize ng water temp. Tsaka ko na asikasuhin ang looks, enjoyin ko muna yung katahimikan ng rig ko hehehe.
-
feroxss
on
28 May 17 @ 02:02 PM #
@psyq
congrats sir, akin naman for gpu from 80 to 41C hehe on full load
- Post deleted #11948054
-
thescout
on
02 Jun 17 @ 03:16 AM #
Mukhang ok to for starters, price is good too compared sa Thermaltake kits na supposedly mas mura in the past. These are soft tubes though, bali compression fittings ang gamit at hindi mo na yun magagamit once magpalit ka ng rigid tubing at bibili ka ulet ng panibagong set of fittings. But I think super ok na to since kasama na din yung GPU block pero GeForce 10 series lang ang pwede. :)
-
hatred123x
on
02 Jun 17 @ 05:33 AM #
@thescount
downside of those kit ay lahat is aluminum materials (not sure with the cpu block and gpu). ang hirap iexpand ng ganyan
-
denice
on
04 Jun 17 @ 06:50 AM #
update sa computer ko mukha na ufo hahahah
-
princedanly
on
04 Jun 17 @ 11:19 AM #
long time no post
-- edited by princedanly on Jun 04 2017, 11:22 AM
-
vladz17
on
04 Jun 17 @ 03:44 PM #
^
@prince
Pati ram mo nakatubig nice!
-
waveathon_2nd
on
06 Jun 17 @ 04:46 AM #
Guys anu po ang Best na bang for buck na Liquid Cooler? mga budget ko ay at least 3k to 3.5k
-
denice
on
07 Jun 17 @ 01:02 AM #
@prince
sir pano heat transfer ng ram sa waterblock nya?
-
feroxss
on
08 Jun 17 @ 10:40 PM #
When RGB is life lol
Share lang literal na R.G.B
-
drunkonpiss2
on
09 Jun 17 @ 08:41 PM #
Mga boss, medyo praning lang, matibay po ba ID cooling? Using a Frostflow 240L and praning lang ako sa mga may leak sa closed loop AIO cooler. May indication po ba ang leaks?
-
RSDrifter
on
10 Jun 17 @ 03:26 PM #
Hi mga guru anong website sa US puwede bumili ng ek-kit. pauwi kamaganak pa bitbit ko na lang kasi.
tries newegg and amazon wala silang EK-KIT P240.
-- edited by RSDrifter on Jun 10 2017, 03:29 PM
-
gzhil
on
10 Jun 17 @ 06:47 PM #
Mga paps need ng help..I have swiftech h220. Nangyaring problem i just cleaned the fans and brushed the rad. Im hitting 90c na. But working ang pump may RPM. No noise rin ang pump. Do I need to tilt the rad whole day muna?
-
vladz17
on
10 Jun 17 @ 07:42 PM #
Hi mga guru anong website sa US puwede bumili ng ek-kit. pauwi kamaganak pa bitbit ko na lang kasi.
tries newegg and amazon wala silang EK-KIT P240.
try mo sa mismong EK website or try mo dito dyan ako bumibili dati
http://www.performance-pcs.com <click here for link>
-
piLio
on
11 Jun 17 @ 11:36 PM #
-
hatred123x
on
13 Jun 17 @ 10:20 AM #
@piLio
pwede na ba to?
<click here for link>
no.
-
Peorth
on
14 Jun 17 @ 09:06 PM #
Mga boss, medyo praning lang, matibay po ba ID cooling? Using a Frostflow 240L and praning lang ako sa mga may leak sa closed loop AIO cooler. May indication po ba ang leaks?
Leaks in AIOs are very rare.
-
princedanly
on
24 Jun 17 @ 07:27 AM #
sir pano heat transfer ng ram sa waterblock nya?
@ denice
meron sya monarch ram block adapter dun kinakabit yung block ng ram.
-
k_9virus
on
27 Jun 17 @ 01:58 PM #
hybrid hard tubing and soft tubing lol what do you guys think?
-- edited by k_9virus on Jun 27 2017, 01:58 PM