-
macadamiadark
on
15 May 16 @ 04:33 PM #
thanks po sir awake, hanap pala ako sa ace ng wire nya, dalhin ko na din para sure sa sukat..
-
yajA
on
15 May 16 @ 06:01 PM #
Kadalasan ng mga wirings sa buong bahay is A and D ano ba ang
dapat na wirings sa bahay? sinusundan ko lang kasi yung ginawa nung dating gumawa tapos napansin ko pa iba iba. may iilan lang na C ang gamit pag ka naka lagay wire to ilaw/switch tapos directho na dun sa main line or junction box yung orange.
ano ba ang mag durable/safe jan sa kanilang lahat?
pwede ba gamitin yung B sa naka fix na extension wire, fix meaning from orange box ikakabit ko na tas lagyan ko na ng outlet. safe ba yun? galing sa pldt ata yung wire nayan madami kasi kame niyan ewan ko kung san galing tigas nga nito. gagamitin ko sa pc yung saksakan na gagawin ko sa B kasi laging inaabot ng anak ko sa baba yung saksakan kaya i tataas ko sana, hinayang naman ako sa wire B kaya balak ko sana gamitin.
Pwede ko ba ito gamitin para mapagana itong DC12V na led light using this plug transformer? naka sulat output 12VDC. sira na tong plug transformer nato e sinaksak ng kapatid ko sa 220. pero
pag bibili ako ng pang pa ilaw dun sa led light any plug transformer ba na 12VDC ang output ok naman? gagawa sana ko ng ambiance light dito sa bahay
Maraming salamat po sa sasagot.
-
awakeruze
on
15 May 16 @ 06:20 PM #
First off, I don't care about any of the wires in your picture. Why? Because I cannot determine what size they are.
Here's what I do know:
For house wiring, AWG #12 (solid or stranded) or 3.5mm ^2 is the minimum for outlets for appliances.
For lighting fixtures, AWG #14 (again, solid or stranded) or 2.0mm ^2 is the minimum for lighting fixtures.
My advice: never mess around with mains wiring if you don't know what you're doing.
pwede ba gamitin yung B sa naka fix na extension wire, fix meaning from orange box ikakabit ko na tas lagyan ko na ng outlet.
galing sa pldt ata yung wire nayan madami kasi kame niyan ewan ko kung san galing tigas nga nito
PLDT's wires do not carry 220 volts. This means you should
not use it.
Pwede ko ba ito gamitin para mapagana itong DC12V na led light using this plug transformer?
You could, but I don't really recommend it, because the output of that transformer is not stable/regulated. You could try a 12v 4-amp adapter used in some LCD monitors and more often in CCTV cameras.
-
dexter11
on
15 May 16 @ 08:36 PM #
good eve. i have this clicking sound sa Power supply the PC. its happening randomly. maybe 5 times a day.
may ibang computer ako pero this never happened to them.
its a true rated corsair power supply. thanks !
-
dexter11
on
15 May 16 @ 08:43 PM #
good eve. i have this clicking sound sa Power supply the PC. its happening randomly. maybe 5 times a day.
and interval is npaka tagal. mga 2-6 hours bago ko mrining ulit ang clicking sound.
btw malakas ang clicking sound.
may ibang computer ako pero this never happened to them.
its a true rated corsair power supply. CX500m
wala nman issue ang computer no crashes or any signs of unstable operation.
btw nka saksak ang computer ko sa outlet where my airconditioning is.
issue ho kya ito ng PSU? is this a sign of a dying PSU?
-- edited by dexter11 on May 15 2016, 08:45 PM
-
statix
on
15 May 16 @ 10:32 PM #
@dexter
try to plug your pc on a different power outlet.
-
dexter11
on
15 May 16 @ 10:47 PM #
@statix
will do.. thanks !
-
petrangkabayo
on
17 May 16 @ 03:19 PM #
ano po bang pinagkaiba ng mga nakahubad or yong walang cover na welding machine at yong may cover type?
-
statix
on
17 May 16 @ 07:41 PM #
petrangkabayo Send Message View User Items on 17 May 16 @ 03:19 PM #
ano po bang pinagkaiba ng mga nakahubad or yong walang cover na welding machine at yong may cover type?
aesthetics, safety protection.
pero mas preferred ng mga metal fabricators ang mga "naka-hubad" na welding machines, customized. mas heavy duty daw kasi mga yun.
-
petrangkabayo
on
17 May 16 @ 11:22 PM #
@statix
thank u
-
statix
on
17 May 16 @ 11:39 PM #
^ welcome.
-
kobewan08
on
22 May 16 @ 10:25 AM #
Hello sirs,
I have a deskjet printer that has lost its power cable, 30v siya, may nagbebenta ng 32V na cable, kunin ko ba yun? almost 2 months na kasi ako naghahanap, magastos kung bibili pa ako ng bagong printer. TIA sa replies.
-
awakeruze
on
22 May 16 @ 02:05 PM #
^
No. Get your printer's manual, take note of the exact model of the power adapter it uses, as well as the output voltage AND amperage.
-- edited by awakeruze on May 22 2016, 02:16 PM
-
petrangkabayo
on
22 May 16 @ 02:50 PM #
what is the model of your printer?
-
marshal021702
on
22 May 16 @ 03:18 PM #
guys plss help po,alam ko off topic. bumili po ako ng surge protector sa ACE hardware ang binigay nila ay MEIJI mes 1304, maganda po b itO?? or phanter parin po??
pls advice po mga master...
salamat
-
jason_orte
on
22 May 16 @ 09:17 PM #
Meron ka bang Schematic ng LED driver para nakapost na picture.
By the way, ikakabit din sya sa Motorcycle. Ty
-- edited by jason_orte on May 22 2016, 09:18 PM
-
crazyone03
on
24 May 16 @ 03:27 PM #
Since thread is about electrical stuff. Question lang paano ko ba lessen ang electrical charge sa body ko? kasi madalas hahawak ako ng mga bakal may static nakaka stress.
also where can i buy a static wrist watch?
-
kobewan08
on
25 May 16 @ 07:33 AM #
what is the model of your printer?
HP deskjet 2060 sir
No. Get your printer's manual, take note of the exact model of the power adapter it uses, as well as the output voltage AND amperage.
noted on this, thank yo very much
-
awakeruze
on
25 May 16 @ 07:47 PM #
@crazyone03
Regarding the anti-static wrist strap:
<click here for link>
-
blue1020
on
29 May 16 @ 01:13 AM #
Sir di ba masira speaker pag nagkabaligtad ung connection ng 2 wires. PA speaker po sya ha, input 400 watts, 200 ohms, output 50W
-
nethskie
on
29 May 16 @ 08:01 AM #
mga bossing san po nakakabili ng mga solid capacitors dito sa pinas? thanks!
-
Deadmau5
on
29 May 16 @ 12:18 PM #
san po kaya ako makakapag paggawa ng psu. parang nag trigger ung safety power nya ee
-
jason_orte
on
04 Jun 16 @ 09:20 PM #
Mga sir pa OT lang. Meron ba kayo masuggest dun sa Questiin ko sa taas. LED driver ng motorcycle headlight. Nasira kasi ung Driver nya. Ty
-
Remod
on
06 Jun 16 @ 03:11 PM #
ask ko lang po ano maganadang pang-tangal ng screw sa laptop n lumaki na yung butas na loose na po kc hindi na kumagat ang screw driver.
-
technoX
on
07 Jun 16 @ 03:10 PM #
@Remod
try mo ipatong muna yung screwdiver sa screw tapos patakan mo ng tunaw na lead ng panghinang. magdidikit yun para magalaw mo pakonti konti..
-
Remod
on
07 Jun 16 @ 04:59 PM #
^ thanks boss epektib nga yan buti may nahanap pa akong spare na screw sa mga sirang laptop.
-
iamnewhere
on
08 Jun 16 @ 04:55 PM #
Good day sirs! Help naman medyo nalilito kasi ako regurding surge protection. See plan ko buy ng AVR with power-on delay (meiji yung brand ok ba yun?) and di ko masyado magets paano siya makatulong sa surge protection. Pag nag blackout and nagkakuryente mag delay siya ng on di ba? How about pag may power surges pano siya makatulong..should I buy a separate surge protector or ok na yung avr na yun for my pc? Thank you all!
-
vanguardwars
on
09 Jun 16 @ 07:40 PM #
^kung maganda yung AVR, that should be enough, pero dami naglipana na low quality avr with surge protection daw. Medyo mahirap maghanap ng quality surge protector, pero meron naman like Stavol Servo-type AVR. I have this, pero di ko na nagamit kasi di na rin ako masyado nag PC. haha.
To be sure bili ka nalang ng separate power strip na may surge protector. Redundancy is the key.
Alao, kapag branded ang PSU, substantial naman ang surge protection nya perp hanggat maari di dapat magamit kasi masisira na rin PSU. Hehe.
-- edited by vanguardwars on Jun 09 2016, 07:42 PM
-
iamnewhere
on
09 Jun 16 @ 07:53 PM #
@vanguardwars
Thank you sa reply sir! Ang mahal po ata yung original na stavol brand and meron yung made in china but i'm not sure sa quality ng build. I think yung meiji brand is Japan (correct me if I'm wrong) but halos wala ako makitang reviews eh.
-- edited by iamnewhere on Jun 09 2016, 08:11 PM
-
lomiboi19
on
10 Jun 16 @ 02:58 PM #
Magandang araw po mga Ginoo,
Saan po kaya makakabili ng ganito door switch po siya ng microwave. May power po kasi yung microwave gumagana ang timer at mga pindutan may ilaw din sa loob. Hindi lang po umiikot yung turn table at hindi umiinit.
