Forum Topic

United Modders Philippines (PC Modding Thread)

  • emcel on 19 Apr 18 @ 07:55 PM #

    Try nyo mag post sa united modders philippines FB page

  • AntisXXmuna on 02 May 18 @ 02:25 PM #

    ^ sa wakas pagtapos ng ilang taon mukhang may aabangan na naman kay master paultan may mga post na ulit sa fb nya e ^_^

  • Pawnstars99 on 20 Jun 18 @ 06:47 PM #

    Pa pm naman kung sino meron pci-e extention. Planning to vertically mount my gpu ty.

  • emcel on 21 Jun 18 @ 07:13 PM #

    Pa pm naman kung sino meron pci-e extention. Planning to vertically mount my gpu ty.
    Madami sa Lazada

  • chyll2 on 02 Sep 18 @ 11:24 AM #

    https://imgur.com/a/9HIniw1

    Pano alisin yung ganito?

  • biribiri on 06 Dec 18 @ 01:15 PM #

    Ano magandang brand ng rotary tool? Madalas Dremel lang ang nakikita ko so hindi ko alam kung may ibang alternative. Lotus? Hoyama Japan?

  • MCCF on 06 Dec 18 @ 02:47 PM #

    Ano magandang brand ng rotary tool? Madalas Dremel lang ang nakikita ko so hindi ko alam kung may ibang alternative. Lotus? Hoyama Japan?

    Dremel yung binili ko. Later, nasunog ko din yung armature nya kasi ginamit ko sa makapal na acrylic na natutunaw habang kina-cut mo. Out of warranty na pero ni-repair pa din nila for a price.

    It is a low torque-high speed tool, kaya dapat pasensyoso ka sa pag-gamit. Di sya katulad ng angle grinder na high torque na pang-walwalan.

    I think it will boil down kung paano mo sya gamitin at after-sales support din.

  • bloodyvamp on 07 Dec 18 @ 01:54 AM #

    gamit ko generic, yung tig 1500 lang nabibili kung saan saan. Ok pa naman after 4 years. kung saan saan ko narin sya nagamit. Ang naging problema ko lang, switch nawakas siguro sa init at yung pinagkakabitan ng cutting disc nya. naputol pero dami naman nabibili din nun.

    para san mo ba gagamitin sir biribiri. kung pang butas butas ng case at beginner pa din naman sa paggamit. pwede na yung generic pang practice.

  • redwing0001 on 07 Dec 18 @ 12:09 PM #

    Ano magandang brand ng rotary tool? Madalas Dremel lang ang nakikita ko so hindi ko alam kung may ibang alternative. Lotus? Hoyama Japan?


    rotary tool rin pinaguusapan, nakabili ako ng 12V rotary tool sa DEECO. madali masira yung speed controller nito pero direct connected ko nung nasira.... its a simple RS550 12V motor na may 4mm chuck. kakapalit ko lang ng motor nito mga 2017 at tumagal yung motor ng mga 11 years din... naalala ko binili ko yung para magcut ng steel sheet metal para dun sa rear speaker ng kotse ko dati.... itong kotseng ito binili ko 2005-2006.

    high torque output ng RS-550 motor pero kelangan mo ng additional power supply na 12V at mga 5 to 10A para kayanin niya yung tool na ito.

    ang replacement RS-550 motor meron nagbebenta locally mga less than 300 each... tapos mod na lang para maikabit yung chuck shaft sa motor. overall super sulit naman bili ko.... medyo mahal lang at 800 each. DEECO raon may nakita pa ako isa dun.

  • biribiri on 07 Dec 18 @ 03:19 PM #

    Sa minor case modding ko lang naman gagamitin tulad ng additional screw holes para sa HDD mount or pangputol ng small metal parts. Wala naman akong balak na gumawa ng mga case window

  • dennisjerdz on 10 Dec 18 @ 12:09 PM #

    Does anyone here know mga nag acrylic laser cut na sila na rin nagsusupply ng acrylic sheet within metro?

    Thanks

  • cangeio00 on 11 Dec 18 @ 07:17 AM #

    Hello! Ask lang po kung paano mag repaint ng pc case? and ano pong brand? tia

  • rage on 18 Dec 18 @ 11:15 AM #

    chiefs, san pwede makabili ng 3mm 16awg cables for custom PSU cabling? thanks!

  • MauroDLRSR on 27 Dec 18 @ 01:53 PM #

    Pwede magpagawa ng io shield ng gpu? Gigabyte 1050ti dual fan sana thanks and pa pm magkano damage

  • budoy2015 on 23 Jan 19 @ 11:05 PM #

    sino po may kilala full cable sleeving service..

    -- edited by budoy2015 on Jan 23 2019, 11:06 PM

  • kenneth123 on 24 Jan 19 @ 01:09 AM #

    Guys pa recommend naman saan makakabili ng full PSU custom sleeves (extension).

  • bloodyvamp on 24 Jan 19 @ 04:12 AM #

    sino po may kilala full cable sleeving service..

    pwede malaman kung anong tatak ng psu yung ipapasleeve mo?
    madali lang kasi gawin yan sir. need lang ng tyaga at oras.

    Guys pa recommend naman saan makakabili ng full PSU custom sleeves (extension).


    sa mga suking tindahan sa may gilmore sir madami. kay pizza hub ako nakakakita ng full kit.

  • budoy2015 on 24 Jan 19 @ 08:46 AM #

    pwede malaman kung anong tatak ng psu yung ipapasleeve mo?
    madali lang kasi gawin yan sir. need lang ng tyaga at oras.


    Seasonic m12II 620W Full modular..nakabili na din ako ng cable extensions pero hindi ako satisfied kasi lalong kumapal ung imamamanage ko na cables plus the fact that i have 6pcs RGb fans installed in my rig.My case is INWIN 101..

    About 2 months ago i came across sa classified ads who is offering this kind of service, the guy is from Morong Rizal which is great kasi im 30mins away from Morong, kaya lng nakalimutan ko ibookmark ung ads nya tapos hirap pa tandaan ung name TPusername nya (Oooerfkhin) something like that.I would highly appreciate kung sino may kakilala sa kanya or anyone who can recommend me that do this kind of services...TIA KaTPC..

    -- edited by budoy2015 on Jan 24 2019, 08:47 AM

  • alvanne on 24 Jan 19 @ 04:59 PM #

    @budoy2015

    Seasonic m12II 620W Full modular..nakabili na din ako ng cable extensions pero hindi ako satisfied kasi lalong kumapal ung imamamanage ko na cables plus the fact that i have 6pcs RGb fans installed in my rig.My case is INWIN 101..

    About 2 months ago i came across sa classified ads who is offering this kind of service, the guy is from Morong Rizal which is great kasi im 30mins away from Morong, kaya lng nakalimutan ko ibookmark ung ads nya tapos hirap pa tandaan ung name TPusername nya (Oooerfkhin) something like that.I would highly appreciate kung sino may kakilala sa kanya or anyone who can recommend me that do this kind of services...TIA KaTPC..


    sa FB PC Groups search mo po Homer Dikitanan...

  • budoy2015 on 24 Jan 19 @ 06:13 PM #

    sa FB PC Groups search mo po Homer Dikitanan...


    ok bosss salamat po

  • sczheibzhen on 31 Jan 19 @ 06:56 PM #

    mga sir baka may nakakaalam po kung anong riser cable ang pwedeng gamitin sa Phanteks Evolv X? pa recommend naman ung may stock sana dito sa pinas. maraming salamat!

  • Geneman on 10 Mar 19 @ 10:35 AM #

    Hello mga sirs, balak ko pong ipa mod yung side panel ng pc case ko to a full acrylic or tempered glass. Baka meron po kayong marecommend na nagmomod. salamat po.

  • alvintuyon on 16 Mar 19 @ 12:04 AM #

    testing lang mga sir may proposal lang po ako paki delete na lang kung bawal...

    DIYer at hobby ko kasi ang woodworking and I am planning to do computer table build with the components build in na sa loob nung table.

    Anybody here willing to fund the materials para igawa ko sila ng custom na table? kung may luma kayong case at glass top mas ok!

    Disclaimer: hindi pa ako nakakagawa ng ganitong custom table but I have done a couple tables already. So I think ok na rin ang skill level level ko sa woodworking. PM nyo ako usap tyo details. Kelangan ko lang ng bagong project :)

    -- edited by alvintuyon on Mar 16 2019, 12:11 AM

  • bloodyvamp on 16 Mar 19 @ 12:22 AM #

    testing lang mga sir may proposal lang po ako paki delete na lang kung bawal...


    sir pm mo naman saken number mo. just in case na magpalit na ko ng table to something longer and wider kontakin kita. pero im thinking din sir na frame should be made of steel. have you ever done something like that?

  • alvintuyon on 17 Mar 19 @ 09:14 AM #

    sir pm mo naman saken number mo. just in case na magpalit na ko ng table to something longer and wider kontakin kita. pero im thinking din sir na frame should be made of steel. have you ever done something like that?


    Sorry sir di ako gumagawa ng steel frame kasi I dont use a welding machine nor do I know how to use one. Although my current computer table is made out of wood and GI pipes tapos painted black para sa rustic feel.

    Kaya lang I found out masmahal pala gumamit ng pipes kesa pure wood.

  • akosichoii on 04 Apr 19 @ 11:27 AM #

    hello, any modder near qc? gusto ko lang sana ipa mod yung case ko.
    Silverstone PS08, radiator/fan holes on bottom and 140mm fan hole sa front.
    thanks sa tutulong :)

  • wehasband on 10 Apr 19 @ 07:51 PM #

    HIndi ako sigurado kung dito ito, pero may gumagamit ba ng ARC Spectrum LED strip? Habol ko yung addressable rgb, pero may sabi na kailangan daw niya ng ARC controller. Pwede ba siyang isaksak na lang sa motherboard na may digital RGB header? Thanks

    https://www.tecware.co/arcspectrum
    (Yung LED strip lang)

  • thevoid on 22 Apr 19 @ 02:47 PM #

    magkano magpa tanggal ng rust then repaint ng case ngayon? plain color lang, shiny black sa labas then light gray sa loob.

  • thevoid on 23 Apr 19 @ 07:02 AM #

    up

  • akosichoii on 23 Apr 19 @ 09:55 AM #

    magkano magpa tanggal ng rust then repaint ng case ngayon? plain color lang, shiny black sa labas then light gray sa loob.


    rust remover and sand paper lang katapat. then spray primer for gray or matte black para isang color nalang bibilin mo, mga 2-3 cans magagastos mo if ikaw gagawa. mas okay kung dismantle mo yung case, i rivet mo nalang ulet.

    TL:DR seek professional help (i.e Republic Powdercoat)

    -- edited by akosichoii on Apr 23 2019, 09:55 AM