-
bluegween
on
28 Jan 16 @ 04:25 PM #
Hi All.
Sa mga technicians/may repair shops dito - inquire lang if you have this:
Touch Pad Palmrest for Asus laptop, here are the details:
Laptop Model: Asus F8Vr
Asus F8V Touch Pad Palmrest Part Number: 13GNNK4AP056 / 13GNNK4AP056-5
Sample photos below:
<click here for link>
<click here for link>
Na-wear out na kasi ung touch pad ng laptop ko kaya gusto ko ipareplace. PM me if you have it thanks!
-
omensid
on
29 Jan 16 @ 05:59 AM #
Just recently changed mobos and one nothing na parating nasisira sakin yung CPU cooler. Parati kasing nababalian ako ng clip yung pinapasok sa mobo. Is there any tutorial or technique kung paano maayos mag-remove/insert ng CPU cooler? TIA!
-
awakeruze
on
29 Jan 16 @ 10:18 AM #
@omensid
Are you using the stock Intel cooler?
If yes, the plastic gets brittle with age, so there's a tendency for it to break as it gets older.
Other than that, one advice I can give is to gently squeeze together the two halves of the bottom part of each clip-- it will make them easier to insert into the CPU socket's mounting holes.
Another would be to attach the heatsink before installing the motherboard to the casing.
-
omensid
on
29 Jan 16 @ 11:40 AM #
Yes intel yung sa akin. Sa experience ko kasi pag-naglilinis or nagpapalit ng parts, yung clip parati yung napuputol sakin. Wala naman sira yung fan pero once na nasira yung clip, parang nasira na din as a whole yung cooler. Pag 1st time mo siyang ikakabit, mabilis lang sya pero kung i-reremove mo then ikakabit, I agree na lumalambot yung plastic na yun kaya minsan tinatamad nako galawin yung CPU+HSF part.
Ginagawa ko ito habang nakakabit yung mobo sa case kaya medyo mahirap talaga.
-- edited by omensid on Jan 29 2016, 11:42 AM
-
ernzt371
on
30 Jan 16 @ 03:25 AM #
Hi Guys! Needhelp! Nag auautorestart lagi ung akin desktop. Napansin ko lang nunag nag install ako ng steam nag simula sya mag loko. Pag naglaro na ako heavy load nagloloko na sya! Auto restart i mean. Pahelp naman madiagnose!
-
gwainne
on
31 Jan 16 @ 08:13 AM #
@ernzt371
pa post ng detailed PC specs mo boss.
at ano nialalro mo at every ilang minutes nag rerestart while playing or working on apps.
-
jr2_pajarillo
on
02 Feb 16 @ 02:24 AM #
mga boss nagpalit kasi ako ng case kaso problema ayaw na mag ON ng PC ko. Diko alam kung nashort ba eh.
Tinry ko na alisin sa case then mobo,cpu,cooler at ram lang rekta sa PSU kaso wala pa din power talaga eh.
-
reiko
on
02 Feb 16 @ 11:48 AM #
@jr2_pajarillo
Na try mo ba yung PSU mo kung may power? Try mo lagyan ng kahit paperclip yung green wire and any black wire sa PSU mo (20 pin) then check mo kung mag spin yung PSU fan
By the way ingat sa pag test...may mga videos for more details on how to check
-- edited by reiko on Feb 02 2016, 11:49 AM
-
jr2_pajarillo
on
02 Feb 16 @ 05:29 PM #
^
Tried that and working ang PSU boss. Yan talaga ginagawa ko to test my PSU nung nasira din GPU ko nun.
-
reiko
on
03 Feb 16 @ 06:48 AM #
What else have you tried so far sir?
Before may ganyan din ako scenario...alis/kabit ko yung CMOS battery and ayun nabuhay ulit yung mobo
Try mo din ala muna memory check mo kng mag on yung unit mo
-
fried_bangus
on
03 Feb 16 @ 07:15 AM #
Help po. Desktop a yaw magboot. Meron power
Umaandar ang fan Pero blank screen. Ok nam an ang monitor.
-
jr2_pajarillo
on
03 Feb 16 @ 08:24 AM #
Tried that too alis kabit din cmos batt. Wala talaga.
-
awakeruze
on
03 Feb 16 @ 09:38 AM #
@jr2_pajarillo
Remove the motherboard and PSU from the casing, and set them up on a table. Usually I'd put the board on top of its box just to be safe.
Then try turning on the PC that way.
@fried_bangus
Remove RAM and turn on PC. It should sound a few beeps (BIOS error code). If it does, then it's very likely that your RAM is defective.
-
jr2_pajarillo
on
03 Feb 16 @ 10:00 AM #
^
Did that already. Done breadboarding wala talaga nangyaysri. Pa RMA ko na kaya?
-
awakeruze
on
03 Feb 16 @ 10:02 AM #
^ Try a different PSU.
-
jr2_pajarillo
on
03 Feb 16 @ 10:33 AM #
Working PSU ko boss. Done with hair clip test
-
reiko
on
03 Feb 16 @ 11:39 AM #
Kung under warranty pa naman pa RMA mo na sir.
Possible may bloated caps yan
-
jr2_pajarillo
on
03 Feb 16 @ 03:33 PM #
Awa ng Diyos nakuha sa tiyaga. Maarte yung 24pin gusto pa di sabay ang saksak. hahaha
-
fried_bangus
on
03 Feb 16 @ 03:37 PM #
Thank you sir awakeruse, remove and reseat ram worked!
-
PrinCed
on
03 Feb 16 @ 08:07 PM #
Mga sir pahelp naman ako. Nagsusudden shutdown kasi ung pc ko well not entirely shutdown since naka on pa rin ung lights sa cpu ko but sa monitor naka "no signal" na sya. Nangyayari lang to kapag naglalaro ako ng mga mid to high end games.
PC Specs:
Processor: AMD FX-4300 Quad-Core Am3+3.8GHz
Motherboard: Asrock 960gc-gs Fx Socket Am3+ Pcie DDR3
GPU: Asus GTX 760 Direct CU II OC 2GB 256Bit
RAM: Kingston Hyper X Fury 1x8GB DDR3-1866 Cl10
HDD: Marshall 1TB Sata
PSU: Corsair Vs550 550 watts
Cooling Device: CoolMaster RL-S12V-24PK-R1 Seidon 120V Heatsink Fan Liquid Cooler
Case: CoolMaster k280
Pa help po sa may idea sa ganitong issue.
-
damnoldcoot
on
03 Feb 16 @ 08:10 PM #
baka overheating issue yan... dati sakin 5850 reference design nangyari, Thermal Paste naging solusyon ko...
-
Squall_2798
on
04 Feb 16 @ 07:38 AM #
Sino po nag rerepair ng VC yung 7970 po kc no display na.
Thanks po...
-
maxikurt
on
05 Feb 16 @ 09:39 AM #
mga sir baka meron po nakakaalam sa device na untangle dito? may problem po kasi ako in application manager and policy manager. thanks in advance!
-
bluepuz
on
06 Feb 16 @ 12:06 PM #
hello there mga peeps...
quick help naman po....
i have a very weird problem with my friends laptop...
dinala nya sa akin yung laptop para tignan ko... dahil nagloloko daw..
i diagnosed the problem...
pasira na yung hard disk, ayaw na gumana ng keyboard at touch pad
sabi nya okay naman daw yung touch screen kaya di bale na daw yung touch pad.. at keyboard mahalaga magboot lang
so i replaced it with an SSD ...okay naman pagkakainstall the OS... then suddenly
yung monitor... magbuboot ng windows logo sa screen ng laptop pero once pumasok na sa desktop.. nagbablack na yung screen tapos kapag kinabitan ng external monitor mo lang makikita yung desktop... and very usable sya and testing everything to be working right naman except yung nga na lumilipat yung display sa external monitor..
anu kaya solution sa problemang to... sakit na ng ulo ko eh
i have search all over pero walang makapag sabi ng saktong sagot or solution
tulong naman po. thanks
eto po pala exact model ng laptop.. acer aspire M5 481PT
-
Staurus03
on
06 Feb 16 @ 09:02 PM #
...@bluepuz share Ko lang baka makatulong, try Mo pasukin yung bios settings, pag ok naman ang mga settings, try Mo nang pa_check yung lcd/led ng laptop!.
-
CurryOne
on
07 Feb 16 @ 04:05 AM #
Guys need help lalo na sa mga expert, eto prob ko.
Newly build PC
A8 7600
Gigabyte f2ma68hm s1
4gb Kingston 1600 hyper x
Win 7 64 bit
I add another 4gb kingston 1600 hyper x, the system recognize it in my comp>proprties it show 8gb installed but 3.45 usable
Bios shows 4gb total memory but cpu-z shows 8gb total memory same freq same timing pero single channel lang dapat dual eh.
Mga na gawa ko ng troubleshoot
-reset cmos
-reseated & swap all stick
-reseated cpu and check kung may bent (wala naman)
-uncheck max memory
-update bios sa latest
No luck!
Muka dito ako nagka prob I tested each mem stick sa first slot ayaw mg boot pero sa second slot ok naman yun dalawa. 2 slot lang mobo ko so hinala ko sira yun slot nilinis at check ko mabuti ok naman 3 days old pa lang. Ang pinagtataka ko kung sira slot hindi dapat babasahin ng system at ng cpu-z na 8gb installed di ba? Tama ba ko? Nag google na ko wala malinaw na solution, wala din ako option sa bios nun sinasabi nila memory remmap. TIA!
-
statix
on
07 Feb 16 @ 12:37 PM #
^how about memtest?
-
CurryOne
on
08 Feb 16 @ 05:01 AM #
Di ko pa na try mem test kasi both stick naman ay fully working sa ibang pc at sa 1 slot ko, naubusan na ko idea kung ano pa gagawin ko bago ko pa RMA. Di lang talaga ma read ng bios 1 stick pag sabay pero ok naman sa system at cpu-z weird!!!
-- edited by CurryOne on Feb 08 2016, 09:28 PM
-- edited by CurryOne on Feb 08 2016, 09:29 PM
-
awakeruze
on
08 Feb 16 @ 02:25 PM #
@CurryOne Send Message
Here's a few ideas.
Idea #1: Look for a setting in the BIOS called "Unganged Mode" for the Memory controller.
Idea #2: Remove both RAM sticks, then turn on the PC. Of course it will boot with an error beep. Turn off the PC, and install both RAM sticks at the same time.
-- edited by awakeruze on Feb 08 2016, 02:25 PM
-
CurryOne
on
08 Feb 16 @ 09:27 PM #
@awakeruze
Wala ako option sa bios na ganyan ni check ko na din sa manual.
Sa idea #2 naman no luck din. Ty
-- edited by CurryOne on Feb 08 2016, 09:45 PM