Forum Topic

PC Technician Lounge (Trading/Selling Not Allowed)

  • matataas tlga vcore ng RX5xx u just have to undervolt,
  • Nagtry na ako sir. Binaba ko max frequency sa 1190. Max 74 tapos naglalaro na lang sa 60-70 deg. Itatry ko pa ibaba later with a more intensive game like Tekken 7.
  • Hello! I need help po installing ng new gpu. Sorry ngayon lang ako nagkaron na na dual 8pins pero ang PSU ko may 1 slot lang (VGA1). Pwede po ba ko gumamit ng 1 cable with dual 8pins connected sa 1port ng psu?

    Specs:
    GPU: Zotac RTX 3070 X-GAMING OC (tri-fan)
    PSU: EVGA 600BQ watts 80plus Bronze Semi Modular Power Supply
  • Fair price na ba ang 800 pag magpapabuo ako sa computer store ng PC? I have all the parts ready
  • sybillium Send Message View User Items on 17 Dec 20 @ 08:37 PM - User is online #
    Fair price na ba ang 800 pag magpapabuo ako sa computer store ng PC? I have all the parts ready


    mahal yan, 250~300 pesos lang average.
  • @statix can you pm me a recommended store sir?
  • ^

    may mga magagaling na medyo mahal. may mura at libre, pero cross finger ka na lng.
  • Last year (2019) 100 PhP lang bayad ko for PC parts assemble sa store kung saan binili ko ang almost all parts ng PC ko. Pero now (2020), 250 PhP na singil nila.
  • Fair price na ba ang 800 pag magpapabuo ako sa computer store ng PC? I have all the parts ready


    Surely mahal yan. Ang isang alternative would be to do it yourself and to look at Youtube guides on how to do it. Siyempre may gratification rin kung ikaw gumawa, tapos baka mas pulido trabaho mo dahil ikaw gagawa ng stuff like cable routing na paminsan walang pakialam ang nagaassemble.

    Yung iba natatakot lang kasi gawin dahil mukang complicated, pero sa totoo lang relatively straightforward naman. Ang kailangan tandaan is that anything na makaka-damage sa computer kung baligtad ang connection ay HINDI mangyayari kasi KEYED ang connectors, meaning designed sila to be inserted only one way (like yung nakakainis na USB A connector, na 50/50 ang chance na tama ang orientation pa pinlug mo). Nearly lahat ng connections ng PC ay keyed, e.g RAM sticks, power cables ng PSU at hard disk data cable ng HDD, etc. That's why hindi dapat pinipilit ang connectors, kung ayaw pumasok most likely mali ang orientation.

    -- edited by Peorth on Dec 18 2020, 02:24 PM
  • Thank you sir sa mga advice ninyo! Nagpa assemble na ako kanina, may issue nga lang paguwi ko. Parang naka max speed yung case fans ko kasi ang ingay. Galing sa lumang rig ko ito before very silent naman. I checked sa bios pero hindi lahat ng fans nandoon e. Ano kayang pwedeng factor?
  • Lahat ba ng fans nakaplug sa fan headers ng motherboard? Kung meron nakaplug sa 12 volt power supply ng PSU directly (e.g. sa Molex connector) magiging maximum ang speed ng fan.

    Also, tignan mo number of wires or holes sa socket ng fan. Kung 3 ang holes meron yan tachometer signal to sense fan speed and pwede i-control ang speed niya using voltage control. Kung 4 ang holes ng fan socket meron yan PWM signal and pwede siya i-control using pulse width modulation (PWM).
  • Baka may kakilala po kayo nagpapahiram ng processor or naghehelp magflash ng bios lol.

    Need ko lang ma update yung bios ko para masupport ryzen 5000 series. Problem is walang flashback button mobo ko and wala akong previous gen na cpu. Kailangan muna masalpakan ng lumang gen na processor para mapunta sa bios tas duon magflash gamit bootable drive.
  • boys! nag upgrade ako ng ssd sa asus laptop then reinstalled windows. Yung keyboard ang weird sa windows search or sa desktop hindi recognized lahat ng keys or pag nag type sa search nag rereset.
  • Quick install ba ung ssd sa laptop mo? Meaning, may panel lang na binuksan tapos mapalitan na cya? If not and you had to remove the cover and disconnect several cables, baka may hindi nakabit ng mabuti. Ung mga laptop keyboard are usually attached to the mobo via a ribbon cable and it's easy to install incorrectly.

    Likewise, baka sa touchpad palmrest yan. May sensitivity level ung palmrest assembly and kung hindi na-install ung driver, baka masyado mataas kaya pag nagtype ka, biglang mawala ung focus dun sa tina-type mo.
  • ^ok na papi. I downloaded and installed the latest windows update ayun tumino sya. hahahaha. Maraming solomot!
  • Hi guys, baka may makapag-shed ng light on some issue I'm experiencing.

    - I recently upgraded to Gigabyte B550M DS3H (Bios updated to F10, not the super latest, pero supports Ryzen 5k series) and Ryzen 5 5600x.
    - I am using 4x 8gb 3600mhz ram sticks (2x GSKILL TRIDENT Z RGB and 2x tforce dark Z) both cl18
    - Pag sineset ko sa BIOS yung XMP to 3600mhz, hindi na nagboboot yung PC.
    - Kelangan i-reset yung CMOS para magboot sya. Eto sya sa Speccy right now:
    <click here for link>
    - Parang 2133mhz lang ang kaya.

    Ano kaya pwede ko gawin para maexperience ko yung 3600mhz? Thank you po sa makakatulong.

    -- edited by ther0ckgoddess on Dec 23 2020, 02:41 AM
  • ^Kailangan mo mag manual RAM overclock. Baka kasi kailangan mo ng additional voltage para maging stable yung RAM (more than yung nasa XMP preset), baka kailangan somewhat less than 3600 MHz ang speed, etc. Hanap ka lang ng RAM overclocking guide sa websites or Youtube, napakaraming resources na nagpapaliwanag kung paano gawin to.
  • ^ Thank you very much, Peorth! Ill go ahead and do that! Happy holidays po :)

    -- edited by ther0ckgoddess on Dec 23 2020, 12:55 PM
  • @ther0ckgoddess, check mo ang specification ng amd ryzen 5 5600x sa amd website...upon checking ang system memory specs nya is 3200MHZ, so hanggang 3200mhz lang ang supported ng cpu. Dapat disabled mo ang xmp, then set ang memory frequency to 3200mhz lng. Tama si @Peorth, manual ram overclock. Ang sa voltage, search mo na lng din ang tamang voltage.
  • Hi newbie here
    Patulong po sana kasi ung 2nd hand rig ko na stutuck sa restart. Wala naman ibang problem except dun. Pag nag restart ako umiikot lhat ng fans mobo,gpu and case fans pero stuck lang sya dun. Dinala ko sa shop para ma clean install
    pero sabi sakin di daw nag boot sa bios baka daw psu. Tanong ko lang kung psu ba talaga or baka ibang components na?
    500watt korean genericc
    ecs h81h4-m4
    i5-4460
    gts 450
    Thanks in advance

    Edit: so tinry ko mag bios then nakapasok pero pag exit ko is same ayaw mag boot. Mobo na po Kaya?

    -- edited by BryanP on Dec 30 2020, 04:06 AM

    -- edited by BryanP on Dec 30 2020, 04:08 AM
  • @BryanP

    need pa i check maigi. madami pa probing questions na kailangan sagutin bago natin husgahan kung ano ata saan ang sira. hehehe.
  • @BryanP

    pm me kung Manila ka. may landline ka ba? tawagan kita. tulungan kita sa abot ng aking makakaya. mahirap mag tshoot ng type type at basa basa kasi.hehehe
  • guys question kapag hindi madetect ang hdd kahit sa bios meron pa bang way para ma recover at madetect sya? may nabalitaan ako noon 2013 na kelangan lang alisin yung isang diode or something at madedetect na uli baka board lang ang problema yung kinakabitan ng sata at yung spindle e baka ok pa at mareread pa sya. may isa din akong hdd maingay ayun mechanical at spindle na talaga at wala na magagawa
  • @vhoi33

    matindihang paraan na yan. :) need advance knowledge na.
  • may isa pang myth dati na sabi totoo daw ilalagay sa freezer
  • guys question kapag hindi madetect ang hdd kahit sa bios meron pa bang way para ma recover at madetect sya? may nabalitaan ako noon 2013 na kelangan lang alisin yung isang diode or something at madedetect na uli baka board lang ang problema yung kinakabitan ng sata at yung spindle e baka ok pa at mareread pa sya. may isa din akong hdd maingay ayun mechanical at spindle na talaga at wala na magagawa


    may isa pang myth dati na sabi totoo daw ilalagay sa freezer


    Parang puro myth yan. Sa pagkaalam ko, usually two things ang pwedeng sira. First, yung controller board na nasa ilalim ng HD. AFAIK, as long as meron kang working controller from an identical model of HDD, pwede mo i-swap out yung sira and place yung working board kasi ang connector lang naman niyan ribbon cable na madaling tanggalin. Yung ribbon cable typically meron port yan sa underside, just pull it out and connect yung ribbon cable ng working controller board.

    Second, yung internals na sa loob ng HDD like spindle motor, heads, etc. Pag ganyan na ang damage dapat i-disassemble ang HDD sa clean room at pwede gumawa ng rebuild there. Tipong pwede kalasain ang platters at ilipat sa another working HDD, etc. Ginagawa yan abroad, e.g. sa U.S. pero very expensive ang service. Usually pinapatulan lang kapag extremely important ang data.

    That's why paulit-ulit kong sinasabi people should invest in a backup service. For example, ako merong 3.2 terabytes of data backed up sa cloud service na unlimited ang storage (Backblaze). Fully automatic yan, once meron bagong file automatic upload, set ka na lang ng exclusions for stuff na ayaw mo i-backup, like downloaded movies. Yung 1-year plan is 2.9K, pumapatak 241 pesos per month. Very reasonable at kahit 100 terabytes pa i-upload mo pwede, ang only limiting factor ay upload bandwidth ng internet connection mo.

    -- edited by Peorth on Dec 31 2020, 01:48 PM
  • Personally, I don't think those are myths. The freezer method could work, but only for a specific type of hard drive problem-- it's not a "100% guaranteed to revive your drive" solution.

    You have to gain a better understanding of how HDDs work before you even think of chucking it into the fridge or busting out the soldering iron.
  • Pag wala wala. Bye na talaga hdd. E ganun talaga buhay.
  • ^
    When it comes to data recovery, past a certain point there's not much you can do except...

    :P
  • ^

    HAPPY NEW YEAR PO SA LAHAT!!!