Forum Topic

PC Technician Lounge (Trading/Selling Not Allowed)

  • ^ bumibigay na GPU
  • need help mga sirs.

    just got a ASRock RX 570 4GB today. Replaced my old gpu with this newer one, pero ayaw mag boot (MSI B150M night elf and seasonic g-series 550w +80 gold psu).

    PC boots kapag walang naka salpak na gpu, and also boots with the old gpu. Pero ayaw talaga pag itong RX 570 ang naka kabit.

    Di ko pa natry sa ibang pc yung bagong gpu, I will have that chance tomorrow siguro but in the meantime...any suggestions as to how to fix or what could be the problem? I am still giving the seller the benefit of the doubt (for now).

    TIA
  • Can you clarify what you mean by ayaw mag boot?

    - PC won't turn on
    - PC turns on but no video
    - PC turns on with video but either gives an error or a black screen after the initial windows loading screen
  • @bum4now
    Can you clarify what you mean by ayaw mag boot?

    PC won't turn on.

    Just a bit of an update after I did some troubleshooting.

    I tried the gpu (rx 570) on my brother's newer pc and the pc was able to boot (powered on). There was no video on his monitor but I assume this is just a cable thing as I have experienced this in the past with my own monitor/gpu.

    I also tried my brother's gpu (1660ti) and my PC was able to boot. Though I had no display as my monitor is DVI and his gpu does not have a DVI port (and I didn't have any converters/adapters). So I'm assuming it probably works..

    Based on this, am I correct in assuming either:
    1. PSU is not working to standard (purchased in 2016) OR
    2. There may be something wrong with the power outlet or the electrical extension cord used for my psu? From what I understand, the RX 570 does have significantly higher power requirements than the 1660ti and the gtx 950 (this is my current gpu).

    Thoughts?
  • ^

    wag mu assume na nag boot yung desktop kahit na nag power on, since walang display or hindi ma verify yung display output.

    I would suggest na i-verify mu muna na meron display output at nag boot talaga kahit sa bios/uefi bago ka mag conclude na yung PSU ang sira.
  • @bum4now @ st_anger_711
    salamat sa tulong. naayos ko na

    turns out yung extension cable pala ang salarin. pinalitan ko and now everything is working as expected
  • Glad to hear that.

    -- edited by bum4now on Dec 10 2021, 10:31 PM
  • Mga boss i bought a new pc in January 2021, bigla siya namatay then nung inayos ko yung position ng RAM bumukas ulit kaso saglit lang. Pinatingin ko sa tech. sabi yung thermal paste daw parang naubos na. Na fix yung issue kaso mga 1 month lang bumalik ulit yung sakit niya. Now nag oopen yung pc kaso hanggang welcome screen lang then mamamatay na agad siya. Ito po yung specs.

    Proc: AMD Ryzen 5 3400G
    MBoard: MSI B450 Tomahow Max
    RAM: 16GB DDR4 3200 PCPC X3treme
    256 SSD
    1TB HD
    Power Supply: DarkFlash 600wats, G600 G Series

    Pa Help po pls.. need sana para sa work.
  • Post deleted #12403656
  • Medyo vague ung issue. What do you mean inayos mo ung position ng ram?

    -Try going into bios then check your temps. Ung nilagay mo kind of points to that as a probable cause.
    -Try mo rin 1 ram stick kung 2 meron ka. Pwede may problem ung 1 stick
    -Outside that, pwde rin PSU pero hindi mo malalaman unless meron kang pwede i-test na ibang PSU.
  • @bum4now
    Thanks boss, not sure biglang gumana ulit today without further doing troubleshooting steps
    Pero try ko pa din yung suggestion niyo po. Palitan ko sana yung power supply ng FSP 650w(80 grade silver) mas ok po ba ito compared sa nakakabit na DarkFlash 600wats, G600 G Series?
  • Check mo rin other factors na baka nag cause ng issue:
    - power fluctuations, nakakasira ng electronics
    - extension cord if you're using one

    Don't know kung mahusay ung darkflash na psu.
  • dead lahat ng USB ports, wala namang high current na nakakabit
    kahit yung internal headers ayaw din

    may power sa 5v line lahat ng usb ports
    may around 1-2v sa data lines(?) pag may kinabit akong keyboard

    may nakita ako with the same issue <click here for link>
    yung 2 resistors nag measure ako 00.4 sa 200 scale, di ko sure kung tama ba yun
    sinubukan ko din bypass yung said resistors and gumawa ng bridge, wala pa din

    wala ako makitang burned components sa board
  • @ParticleX
    That sounds like damage to the chipset itself. :O
  • mga sir, palit board na ba kapag hindi na talaga nag save ng settings yung bios and laging hindi naguupdate yung time? naka ilang palit nako ng cmos batt and nag flash bios nadin eh. almost 10yrs na din yung board ko and so far yan pa lang yung issue na naencounter ko, ayaw ko pa sya let go kase maayos pa naman kahit sobrang tanda na hahaha!

    -- edited by badjawong on Dec 16 2021, 07:00 AM
  • mga pwede mo try since 10 yr old board:

    - check mo ung cmos battery slot, baka may dumi o oxidation (pwede green o ibang kulay na parang libag). Both can cause loss of contact so kahit bago ung cmos battery mo, hindi rin "nakikita" ng board kung walang proper contact
    - do visual inspection of the board, lalo na dun sa malapit sa cmos battery. Pwede kasi na may bloated capacitors. Kung meron, dapat iyon palitan
    - check mo rin ung ibabaw ng board gamit flashlight, kung meron kang nakikitang parang natuyong liquid, ibig sabihin may nag-leak na capacitor. Dapat linisin ung natuyong liquid and palitan ung nagleak na capacitor
  • That sounds like damage to the chipset itself. :O

    likely... or meron daw fuse yung ports e pero seeing na may voltage, it might not be the problem

    ang issue pa is the board doesn't have PCI ports, only PCI-e

    plan ko sana is to use a USB-PCIe card. kaso you can't boot from an addon card, also di ko sure kung mag work yung keyboard sa BIOS via the addon card

    i can install naman the OS from another OS then transfer the drive, or boot from PXE, etc etc. pero mas maganda sana to have the built in USB slots repaired. ahay
  • Hello. Help pls. I use my laptop for online classes, last time I used it was December 14 and it was still working fine. Then today I tried opening it, logged in my password but then, after logging in there is just blank blue screen with just 2 icons below 1 for audio and 1 menu icon.

    What is wrong with my laptop? Is there a way to fix it? Thanks
  • @paulazatin

    Please share a picture of your screen. Medyo mahirap ma-visualize ano nangyari.

    Possibilities:
    - naiwan sa fullscreen ng whatever app was being used for online classes
    - nag-hang yung PC

    Easy fix kung wala ka naman hindi na-save, turn off and turn on the PC. If It's still has the same problem, the picture will help.
  • @bum4now

    Thank you for the reply. Ganito lang sya after maglog in.

  • Did you try turning it off?

    It looks a bit like yung Out of Box Experience that you get when your computer is brand new but I'm not completely sure. Was there a "Welcome" message or an text that you saw on screen after logging in?
  • @bum4now

    Thank you Sir. I tried shutting it down. Then opened it again, it works fine now. Kinabahan ako akala ko di na gagana.
  • You're welcome.
  • mga Ka TPC

    anu po kaya problema ng PC ko. nagpalit ako mobo same exact mobo, old stock 1155 board.

    Ayaw nya mag power on, walang power. Need ko pa tangalin ung 24pin na power sa mobo tas balik ulit, after nun nabubuksan naman sya..

    Ang problema pag power on ko ulit PC, need ko ulit bunutin at salpak 24 pin para bumukas. ayaw ko naman kada bubuksan pc ko ganun ang hassle din.

    Pero pansin ko nung iniwan ko nakabukas ung AVR ko kung san nakasaksak ung PC, kinabukasan pag bubuksan ko nag power on namn.
    Pero kapag inoff ko dun ung AVR kasama ng PC. pag on ko ng PC ayaw ulit mag power.. need ko ulit hugutin ibalik 24 pin power .

    p.s dun sa luma kong Mobo di naman ganto na po power on naman..

    -- edited by m3ng98 on Dec 25 2021, 09:14 AM
  • Natry mo na ba na i-shutdown tapos after 1 minute i-on uli? Nag-on ba cya o kelangan reseat ung 24 pin cable?

    Tuwing i-reseat mo ung 24 pin cable, hinihiga mo pa ba ung case o bukas, reseat tapos on lang?

    Baka may ground ung casing o kaya maluwag ung 24 pin socket.

    Bakit pala pinalitan mo ung lumang mobo kung pareho lanh?
  • @m3ng98

    MSI ba?
    double check your front panel connector connections.
    or hanapin mo sa BIOS regarding power, then look for JFP2 settings. it should be set to POWER, most likely naka-STANDBY yan.
    nangyayari yan dati sa X58 ko.
  • any one experienced 0xc0000005 error? naka ilan format na din ako am4 then balik ako sa ddr3 an am4 same error pa din upon launching app
  • Anong app ung nagkaka error?
  • ok na to nag try ko untouched OS windows 10 yung 2h21 na released last nov 2021 mukhang may needed install sa ghost spectre pagka update mo sa latest build

    bale gpu-z nag eeror pag launch tsaka albion online nag error din
    basta online app mag eeerror
  • Post deleted #12408474