How to bridge mode PLDTMYDSL Baudtec RN243R4?

• nikonikoniko on 16 Oct 16 @ 02:19 PM #

  Mga sir. San po pwede i download ang frimware po netong modem+router ko. Thanks sa reply
  
  
  
  -- edited by nikonikoniko on Oct 16 2016, 02:20 PM

• nikonikoniko on 18 Oct 16 @ 05:52 PM #

  Guys pa help naman

• Blu3martini on 18 Oct 16 @ 06:24 PM #

  @ReyM21
  
  The guide is for bridging the baudtec.
  What you want is to use the cdrking as an access point.
  
  Keep the baudtec as is.
  Set cdrking to 192.168.1.2
  Disable dhcp on cdrking
  Connect baudtec lan port to cdr king lan port
  
  Done
  
  If you meant to use the cdr king as a repeater then that's another matter.
  Check your manual if the router supports it.
  
  @nikonikoniko
  
  Why?
  When i tried searching for the model on baudtec's site ibang picture ng router ang lumilitaw.
  If you meant pldt firmware then i doubt anyone here has it.
  
  Unlike the old zyxel p660r-d1 i dont think may way tayo to backup the firmware
  
  -- edited by Blu3martini on Oct 18 2016, 06:26 PM

• ReyM21 on 21 Oct 16 @ 04:12 PM #

  @Blu3martini ...
  
  Sir, salamat sa pointers.
  Now alam ko na ang dapat gawin sa CDR king router ko.
  
  Tyvm!

• ReyM21 on 24 Oct 16 @ 11:57 AM #

  @Blu3martini
  
  Sir, upon checking, may feature of repeater pala yung cdrking router ko.
  May guide ka ba on how to do this, re: baudtec wifi modem to any modem/router as repeater?
  
  Thanks.

• Blu3martini on 24 Oct 16 @ 08:57 PM #

  @Blu3martini
  
  Sir, upon checking, may feature of repeater pala yung cdrking router ko.
  May guide ka ba on how to do this, re: baudtec wifi modem to any modem/router as repeater?
  
  Thanks.
  

  
  
  Please check your cdr king manual.
  A repeater shouldn't need any configuration from the source side.
  
  if it says WDS repeater don't bother sakit lang sa ulo
  
  -- edited by Blu3martini on Oct 24 2016, 08:57 PM

• cryptokalel on 30 Nov 16 @ 10:05 AM #

  salamat po at nbridge ko na ung baudtec ko pero ask ko lng po normal ba bumagal ang bandwith nakaplan 999 5mbps po ako kpg baudtec ang gamit pumapalo ng 4.8-5mbps pero nung nbrdge na ung baudtec pra mgng modem at ung tp link ang router ko ngng 3.8mbps nlng po. any adv?
  
  -- edited by cryptokalel on Nov 30 2016, 10:06 AM

• freeman76 on 27 Feb 17 @ 06:39 PM #

  Kung Ibi bridge ko ba yung Baudtec ko at ikokonek sa Asus router, kailangan ko ba ng username and password from PLDT?
  
  Diba wala nang binibigay na username and password ngayon? (Noob question, pasensya na)

• Blu3martini on 27 Feb 17 @ 08:18 PM #

  wala na

• freeman76 on 28 Feb 17 @ 01:25 AM #

  @Blu3martini so bale after i bridge connect ko lang si baudtec sa asus router then mag auto connect na sya sa net. Ganun po ba?

• Blu3martini on 28 Feb 17 @ 12:29 PM #

  yes.
  but double check if it works with a pc directly connected first.

• freeman76 on 28 Feb 17 @ 05:05 PM #

  I will. Maraming maraming salamat @Blu3martini.

• freeman76 on 15 Apr 17 @ 09:27 PM #

  @Blu3martini
  
  Diba may naka post na link dito before kung pano i bridge yung ibat-ibang brand ng PLDT modem/router? Asa google drive ata yun.
  
  Hinahanap ko di ko na sya makita. Baka pedeng pa pm naman nung link@@Blu3martini
  
  Thanks!

• Blu3martini on 15 Apr 17 @ 10:18 PM #

  <click here for link>

• jmdulay on 15 Apr 17 @ 11:53 PM #

  Thanks for the great guide!! Sobrang naka tulong sa akin to.
  
  Question - may Double NAT pa rin ba kayo even if naka set to Bridge Mode ang Baudtec modem? May workaround ba to avoid this?

• freeman76 on 16 Apr 17 @ 05:36 AM #

  Maraming salamat @Blu3martini

• unimodem on 16 Apr 17 @ 06:50 AM #

  Question - may Double NAT pa rin ba kayo even if naka set to Bridge Mode ang Baudtec modem? May workaround ba to avoid this?

  
  
  Please check first kung ano WAN IP na nakukuha mo sa router. Pag WAN IP is 100.xxx.xxx.xx.xx naka CGNAT(Carrier Grade NAT) ka.
  Para sigurado, check first your WAN IP sa router then make a google search "what is my ip".
  Pag di nag match its confirmed naka CGNAT ka na..

• Lance23 on 29 Jun 17 @ 09:17 PM #

  Hi all. Any instructions on how to set this BaudTec modem/router to wireless ap - or is it even capable? Thank you.
• Post deleted #11989491

• nettewurk on 05 Aug 17 @ 04:43 PM #

  Tried to set a0 to 1483bridge and DHCP disabled in RN234R4 ADSL modem
  but what should be the setting of the D-Link DIR-880L below
  
  
  
  
  Can't connect if the setting is set below
  device mode: router (not bridge)
  internet connection: Dynamic IP (DHCP)
  MTU: auto
  MAC address clone: same with RN243R4
  
  Is there is I need to set in other setting?
  
  Presently naka double NAT.
  
  Thanks
  
  -- edited by nettewurk on Aug 05 2017, 04:44 PM

• Javoy888 on 09 Aug 17 @ 05:52 PM #

  I'm using a linksys router (flashed with shibby tomato firmware) with the pldt's baudtec modem. Connection type for the router is DHCP and internet works fine for me.

• freeman76 on 17 Sep 17 @ 03:25 AM #

  Mga ka TPC,
  
  X-posted --- Pwede bang gawing, repeater itong Zyxel p-660hn-t1a na modem/router? Currently naka bridge yung ONU ko at ang gamit kong router is ASUS, plano ko sana gawing repeater yung luma ko Zyxel p-660hn-t1a modem/router. Possible po ba?
  
  Kung pwede pano po ang procedure?
  
  TIA
• Post deleted #12144161

• tampy on 03 Aug 18 @ 04:36 PM #

  Mga sir ask ko lang kung pano gawin Repeater yung pldt modem/router na baudtec. Na activate na kasi fibr namin.