Micro ATX users here!

• XtraRice on 22 Jul 22 @ 01:52 PM #

  ^
  
  Pwede yan. Basta yung hindi lalampas ng 55mm yung kapal ng radiator tsaka fan combined.

• bluen on 31 Jul 22 @ 02:06 PM #

  Question for Tecware Fusion owners, kahit na hindi nakasabi sa compatibility, may holes po ba na magkakasya ang 120mm fan sa likod? The case's max cooler height is 155mm, and all the other cases that have the same max height have 120mm rear fan compatibility. I've seen other builds din na may 3.5" hard drive sa likod.
  
  I'm planning to save costs by buying a 5-pack of fans but I'd have one extra. Any insights/experiments would be greatly appreciated. Thank you.
  
  -- edited by bluen on Jul 30 2022, 11:06 PM

• chiboman2000 on 31 Jul 22 @ 06:59 PM #

  @bluen
  
  a 120mm fan won't fit at the back/rear of the Tecware Fusion. only 80mm or 92mm SLIM fan can fit.
  
  you can put 2 (120mm) normal fans on top & 2 slim (120mm) fans at the bottom and if you have a low profile air cooler you can put 2 at the side mounted bracket if your using an SFX PSU.
  
  i would suggest just going with 2 SLIM 120mm P12 fan by ARCTIC and 2 regular P12 fans by ARCTIC .... the SLIM fans at the bottom and regular fans on top. If your going to use the side bracket for fans use another 2 SLIM fans.
  
  in total 4 slim fans and 2 regular fans.

• XtraRice on 04 Aug 22 @ 04:18 AM #

  mATX aquarium case?
  <click here for link>
  
  
  
  
  

• gr8guy on 04 Aug 22 @ 04:47 AM #

  ^ "water-cooled"?

• XtraRice on 06 Aug 22 @ 01:57 PM #

  I built in a Fusion with NR200 feet!
  
  Ryzen 7 3700X
  Palit RTX 3070 Gaming Pro
  MSI B550M Mortar Wifi
  Corsair Vengeance RGB RT 3600Mhz CL18 32Gb
  Samsung 970 Evo Plus 250Gb M.2 SSD
  Kingston A2000 1TB M.2 SSD
  4TB spinner
  Coolermaster V850 SFX
  Thermalright PA120 Black
  4 x Arctic P12
  2 x Deepcool RF120.
  
  
  
  
  
  
  -- edited by XtraRice on Aug 05 2022, 10:59 PM

• JDG on 09 Sep 22 @ 11:14 AM #

  ^ saan ka nakabili nung feet?
  
  -- edited by JDG on Sep 08 2022, 08:15 PM

• oiastig on 09 Sep 22 @ 01:52 PM #

  Anyone already tried building with the Asus AP201 Prime?
  
  
  
  
  Very tempted to downsize again
  
  -- edited by oiastig on Sep 08 2022, 10:53 PM
• Post deleted #12428249

• XtraRice on 12 Sep 22 @ 05:16 AM #

  @JDG
  
  Pina-print ko lang sa mga 3D printing services sa shokkee. P350 ang binayad ko.
  
  Ito yung model. <click here for link>
  
  -- edited by XtraRice on Sep 11 2022, 02:16 PM

• judef on 19 Sep 22 @ 05:14 PM #

  Question for Tecware Fusion builders. Already have the case, and I've installed a CoolerMaster 650W fully modular PSU. It's ATX so exactly 160mm length niya. Still about to buy mobo and GPU.
  Considering my PSU, limited ba talaga ako sa 245mm long na GPU, or pwede ko ikasya slightly longer GPUs kung horizontal mount naman? I saw on reddit na if I get a mobo that has the GPU positioned sa lower slot pwede naman magkasya slightly longer GPUs, kahit up to 280mm. Pero I'm not sure how true that is. Thanks!

• nasmandac on 11 Oct 22 @ 12:54 AM #

  mejo matagal na ko nka sub dito sa thread na to, im always a fan of MATX builds, here is mine. btw yung case na yan nakita ko lang sya d2 sa thread and surprisingly meron nga sya sa LazGlobal.
  
  Aorus B550m pro AX
  R5 5600x
  Gigabyte RTX 3070 Eagle OC
  Corsair Vengeance RT 8GBx4 3600
  CM 650W Gold MWE V2
  Crucial P1 500GB
  Crucial P2 1TB
  Seagate Barracuda 4TB
  Jonsbo D30
  
  
  
  
  
  
  
  
  
  -- edited by nasmandac on Oct 10 2022, 10:16 AM

• chiboman2000 on 07 Nov 22 @ 09:57 AM #

  cheap alternative to the JONSBO D30 now available on AMAZON .... the GAMEMAX Spark
  
  
  
  
  -- edited by chiboman2000 on Nov 06 2022, 05:57 PM
  
  -- edited by chiboman2000 on Nov 06 2022, 05:58 PM
  
  -- edited by chiboman2000 on Nov 06 2022, 05:58 PM
  
  -- edited by chiboman2000 on Nov 28 2022, 05:18 PM

• XtraRice on 28 Nov 22 @ 02:05 AM #

  Switched to the Inwin A3 from Fusion.
  
  
  
  
  

• XtraRice on 28 Nov 22 @ 02:06 AM #

  
  
  
  -- edited by XtraRice on Nov 27 2022, 10:50 AM

• XtraRice on 28 Nov 22 @ 02:06 AM #

  Finally magagamit ko na yung USB C header ng motherboard ko, hehe.
  
  
  

• Ignus on 28 Nov 22 @ 05:08 AM #

  ^Kumusta yung temperature compared sa Fusion? Okay na sana yung AP201 pero sobrang haba, daig pa yung ibang mid tower cases lol.

• XtraRice on 28 Nov 22 @ 04:00 PM #

  ^
  Nagpalit din kasi ako ng processor and cooler so hindi ko talaga masabi kung alin sa Fusion or A3 ang mas malamig.
  
  Bali 3700X to 5900X, tapos Thermalright PA120 to Deepcool AK500.
  
  Ito yung Fusion + 3700X + PA120. Cinebench + Superposition sabay.
  
  
  
  A3 + 5900X + AK500. Same benchmarks.
  
  

• XtraRice on 29 Nov 22 @ 01:17 AM #

  So, tested again. Rear intake. Closed vs open side panel, zero difference sa CPU temps.

• Ignus on 29 Nov 22 @ 05:45 AM #

  ^Mukhang maganda naman yung temperature considering naka 5900x ka na @ 178 W.
  
  Out narin pala sa L*zada from a mainland seller yung Jonsbo D31 Mesh.
  
  -- edited by Ignus on Nov 28 2022, 01:45 PM

• oonaakona on 30 Nov 22 @ 11:42 AM - click here for link #

  Planning to change case, ano marerecommend nyo na GPU cooling friendly mATX case? Currently using Define Mini C TG and Gigabyte RTX 3070, sa BF2042 and RDR2 pumapalo ako ng 80 to 85 kahit well adjusted ang fan curve ng GPU. CPU naman wala problem kasi never lumagpas ng 75c.

• curenei on 30 Nov 22 @ 12:27 PM #

  ^kunin mo lang siguro yung may butas yung psu shroud. tapos mesh yung harap ng case. gamit ko rakk haliya matx. di naman pumapalo 70c temps ko.
  asus tuf 3060 ti gamit ko. 1440p 144hz. usually 66c below lang 2200rpm fan naka auto lang kase ako. spiderman tsaka nba nilalaro ko.

• JDG on 30 Nov 22 @ 05:34 PM #

  
  
  -- edited by JDG on Nov 30 2022, 01:34 AM

• oonaakona on 30 Nov 22 @ 05:36 PM - click here for link #

  curenei Send Message View User Items on 30 Nov 22 @ 12:27 PM #
  ^kunin mo lang siguro yung may butas yung psu shroud. tapos mesh yung harap ng case. gamit ko rakk haliya matx. di naman pumapalo 70c temps ko.
  asus tuf 3060 ti gamit ko. 1440p 144hz. usually 66c below lang 2200rpm fan naka auto lang kase ako. spiderman tsaka nba nilalaro ko.

  
  
  Hanap ako sa market and sa mga suki. Nag laro ako kanina with open TG, bumaba ng 5 to 10c yung temps ng CPU and GPU. Either kulang pa yung buga ng mga case fans (using Arctic P12) or kulob lang talaga sa loob.

• XtraRice on 30 Nov 22 @ 05:47 PM #

  ^ Yung mga walang basement tulad ng Fusion, Jonsbo D30, and A3 maganda ang GPU thermals.
  
  Itong A3 very open yung bottom niya. Ikaw na lang bahala kung lalagyan mo ng fan or wala. Filtered na rin na pwede mo tanggalin from the front.
  
  
  
  
  -- edited by XtraRice on Nov 30 2022, 01:48 AM

• expert_gamer on 04 Dec 22 @ 03:23 PM #

  Mga paps. May massuggest ba kayo na MATX na may handle for portability? Most of the case na familiar kasi ako puro ITX and SFX PSU and parang nakikita ko lang lagi compatible MATX ung mga expensive brand like Sliger and Mechanic Master.
  
  For MATX Board and ATX PSU. Baka sakali lang may iba pa.

• ame on 04 Dec 22 @ 05:08 PM #

  Cooler Master Q300p?

• expert_gamer on 04 Dec 22 @ 05:46 PM #

  ^
  Parang ang weird nung handle kasi nun para kang bubuhat ng case ng beer.

• Ignus on 04 Dec 22 @ 08:20 PM #

  @expert_gamer
  BitFenix Prodigy M 2022 pero parang wala pa sa local market.

• ricomambo on 04 Dec 22 @ 10:49 PM #

  Planning to change case, ano marerecommend nyo na GPU cooling friendly mATX case? Currently using Define Mini C TG and Gigabyte RTX 3070, sa BF2042 and RDR2 pumapalo ako ng 80 to 85 kahit well adjusted ang fan curve ng GPU. CPU naman wala problem kasi never lumagpas ng 75c.

  
  
  I would wait for the Lian-li Lancool 216. Patience is a virtue ^_^